Hi

I use the dump script of openbsdsupport.org to backup the internal SATA disk of 
my soekris to an external USB disk.

<snip>
  DUMP: 197357941 tape blocks
  DUMP: Date of this level 0 dump: Thu Nov 13 23:03:31 2008
  DUMP: Volume 1 completed at: Fri Nov 14 09:25:20 2008
  DUMP: Volume 1 took 10:14:48
  DUMP: Volume 1 transfer rate: 5350 KB/s
  DUMP: Date this dump completed:  Fri Nov 14 09:25:20 2008
  DUMP: Average transfer rate: 5350 KB/s
  DUMP: level 0 dump on Thu Nov 13 23:03:31 2008
  DUMP: DUMP IS DONE
  621m51.83s real     9m31.74s user   174m12.85s system
-------------------------------------------------------------------
Filesystem     Size    Used   Avail Capacity  Mounted on
/dev/sd0a      458G    188G    247G    43%    /backup

The script did a level 0 dump of my /strg mountpoint to /backup yesterday. But, 
I think this is really slow. What should I be looking at?

My dmesg (soekris net5501-60):
OpenBSD 4.3 (GENERIC) #0: Tue Nov 11 09:13:17 CET 2008
    [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD" 586-class) 434 
MHz
cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX
real mem  = 268005376 (255MB)
avail mem = 251092992 (239MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 20/71/05, BIOS32 rev. 0 @ 0xfac40
pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc8000/0xa800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x30
glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES
vr0 at pci0 dev 6 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11, address 
00:00:24:c9:5e:28
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, 
model 0x0034
vr1 at pci0 dev 7 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 5, address 
00:00:24:c9:5e:29
ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, 
model 0x0034
vr2 at pci0 dev 8 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 9, address 
00:00:24:c9:5e:2a
ukphy2 at vr2 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, 
model 0x0034
vr3 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 12, address 
00:00:24:c9:5e:2b
ukphy3 at vr3 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, 
model 0x0034
glxpcib0 at pci0 dev 20 function 0 "AMD CS5536 ISA" rev 0x03: rev 0, 32-bit 
3579545Hz timer, watchdog, gpio
gpio0 at glxpcib0: 32 pins
pciide0 at pci0 dev 20 function 2 "AMD CS5536 IDE" rev 0x01: DMA, channel 0 
wired to compatibility, channel 1 wired to c
ompatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD3200BEVT-00ZCT0>
wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ohci0 at pci0 dev 21 function 0 "AMD CS5536 USB" rev 0x02: irq 15, version 1.0, 
legacy support
ehci0 at pci0 dev 21 function 1 "AMD CS5536 USB" rev 0x02: irq 15
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "AMD EHCI root hub" rev 2.00/1.00 addr 1
isa0 at glxpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 9: GPIO VLM TMS
gpio1 at nsclpcsio0: 29 pins
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "AMD OHCI root hub" rev 1.00/1.00 addr 1
biomask e5c5 netmask ffe5 ttymask ffe7
mtrr: K6-family MTRR support (2 registers)
umass0 at uhub0 port 1 configuration 1 interface 0 "Western Digital External 
HDD" rev 2.00/1.04 addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets
sd0 at scsibus0 targ 1 lun 0: <WD, 5000AAV External, 1.04> SCSI2 0/direct fixed
sd0: 476940MB, 60801 cyl, 255 head, 63 sec, 512 bytes/sec, 976773168 sec total
softraid0 at root
root on wd0a swap on wd0b dump on wd0b

Reply via email to