Hi.
I get such message every morning when I come to my work.
I try to increase limits in pf.conf: set limit { states 50000, frags 50000,
src-nodes 50000 } but it doesn't solve this problem.
My ip: 193.239.143.252.
Routing table:
default 193.239.143.193 UGS 3 14062 - tun0
127/8 127.0.0.1 UGRS 0 0 33208 lo0
127.0.0.1 127.0.0.1 UH 3 815 33208 lo0
172.16.9.1 172.16.50.254 UGHS 2 14395 - vr0
172.16.50/24 link#1 UC 1 0 - vr0
172.16.50.254 fe:2a:a9:73:5a:0e UHLc 1 0 - vr0
192.168.0/24 link#2 UC 6 0 - vr1
192.168.0.2 00:0e:2e:0d:2f:52 UHLc 0 1170 - vr1
192.168.0.5 00:0c:76:b5:b6:cf UHLc 1 13167 - vr1
192.168.0.20 00:18:f3:07:d6:e8 UHLc 0 7 - vr1
192.168.0.200 00:50:70:74:3e:1d UHLc 0 80 - vr1
192.168.0.222 00:50:70:74:3d:bc UHLc 0 39 - vr1
192.168.0.246 00:03:47:e3:7d:92 UHLc 0 36 - vr1
193.239.143.193 193.239.143.252 UH 1 0 1500 tun0
224/4 127.0.0.1 URS 0 0 33208 lo0
Dmesg:
OpenBSD 4.3-stable (ROUTER.i386) #2: Tue Oct 14 21:20:56 EEST 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/ROUTER.i386
cpu0: Intel(R) Celeron(TM) CPU 1200MHz ("GenuineIntel" 686-class) 1.20 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 402157568 (383MB)
avail mem = 384663552 (366MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/18/01, BIOS32 rev. 0 @ 0xfb130,
SMBIOS rev. 2.2 @ 0xf0800 (38 entries)
bios0: vendor Award Software International, Inc. version "6.00 PG" date
10/18/2001
bios0: FASTFAME TECHNOLOGY CO.,LTD. 3IDF 3IEF
apm0 at bios0: Power Management spec V1.2 (slowidle)
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf94
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfded0/176 (9 entries)
pcibios0: PCI Exclusive IRQs: 5 7 10 11 12
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371SB ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82815 Host" rev 0x04
agp0 at pchb0: aperture at 0xe0000000, size 0x2400000
ppb0 at pci0 dev 1 function 0 "Intel 82815 AGP" rev 0x04
pci1 at ppb0 bus 1
vga0 at pci1 dev 0 function 0 "ATI Mach64 GZ" rev 0x3a
wsdisplay0 at vga0 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x11
pci2 at ppb1 bus 2
vr0 at pci2 dev 4 function 0 "VIA VT6105 RhineIII" rev 0x8b: irq 11, address
00:1e:58:9f:f8:16
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 9: OUI
0x004063, model 0x0034
vr1 at pci2 dev 5 function 0 "VIA VT6105 RhineIII" rev 0x8b: irq 10, address
00:1e:58:9f:f8:02
ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 9: OUI
0x004063, model 0x0034
pcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x11
pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x11: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <Hitachi HDS721680PLAT80>
wd0: 16-sector PIO, LBA48, 78533MB, 160836480 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
"Intel 82801BA SMBus" rev 0x11 at pci0 dev 31 function 3 not configured
"Intel 82801BA AC97" rev 0x11 at pci0 dev 31 function 5 not configured
isa at pcib0 not configured
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
midi0 at pcppi0: <PC speaker>
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask f3e5 netmask ffe5 ttymask ffe7
mtrr: Pentium Pro MTRR support
root on wd0a swap on wd0b dump on wd0.
Thanks for your help.
--
Best, Yuriy A. Dmitrishin.
