On 2008/11/27 19:30, don cipo wrote: > I tried OpenBSD 4.4-stable today and it works wery well. So, my gues is that > something wrong has happened with the ahci driver in OpenBSD 4.4-current. I > think this is a issue that the developers should be aware of.
There haven't been any big changes to ahci since 4.4 release. The cause is a bit more likely to be an interrupt-related problem. > > I tried to install OpenBSD 4.4-current from 24 november. It hangs during > boot. My sistem is a FSC Celsius W360 with ICH9R/DO/DH SATA Controller. Is > this supported ? > I am sure someone will be interested to look at this, *if* you can get the required information. If you are lucky, you might find that dmesg shows both the current and previous boot messages after a warm reboot. If that's the case, boot a -current snapshot, reboot into -stable and you may just have the information already there. If not, see http://www.openbsd.org/faq/faq4.html#getdmesg. You might need to buy/borrow a null modem cable if you don't already have one.
