On Mon, Dec 8, 2008 at 9:52 PM, Daniel Melameth <[EMAIL PROTECTED]> wrote:
> On Mon, Dec 8, 2008 at 11:28 AM, k z <[EMAIL PROTECTED]> wrote:
>> ne3 works but "couldn't map interrupt" errors do appear:
>>
>> cbb0 at pci0 dev 19 function 0 "Toshiba ToPIC97 CardBus" rev 0x20:
>> couldn't map interrupt
>> cbb1 at pci0 dev 19 function 1 "Toshiba ToPIC97 CardBus" rev 0x20:
>> couldn't map interrupt
>
> You might want to try changing how the BIOS presents these slots, if
possible.
In BIOS, the Auto-select meant falling to CardBus/16 bit; setting value
to "PCIC compatible" has helped:
--- before.txt Thu Oct 5 08:03:43 2006
+++ after.txt Thu Oct 5 08:03:21 2006
@@ -9,12 +9,12 @@
bios0 at mainbus0: AT/286+ BIOS, date 12/26/97, BIOS32 rev. 0 @ 0xfe95a
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 100%
-apm0: AC on, battery charge high, estimated 1:52 hours
+apm0: AC on, battery charge high, estimated 2:17 hours
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf8e80/96 (4 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0xffff product 0xffff
pcibios0: Warning, unable to fix up PCI interrupt routing
-pcibios0: PCI bus #21 is the last bus
+pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x9800
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
@@ -24,8 +24,6 @@
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ohci0 at pci0 dev 11 function 0 "NEC USB" rev 0x02: irq 11, version 1.0
"Toshiba Fast Infrared Type O" rev 0x21 at pci0 dev 17 function 0 not
configured
-cbb0 at pci0 dev 19 function 0 "Toshiba ToPIC97 CardBus" rev 0x20:
couldn't map interrupt
-cbb1 at pci0 dev 19 function 1 "Toshiba ToPIC97 CardBus" rev 0x20:
couldn't map interrupt
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "NEC OHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
OpenBSD 4.4-current (GENERIC) #1556: Fri Dec 5 18:09:01 MST 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium/MMX ("GenuineIntel" 586-class) 167 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MMX
cpu0: F00F bug workaround installed
real mem = 33189888 (31MB)
avail mem = 22269952 (21MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/26/97, BIOS32 rev. 0 @ 0xfe95a
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 100%
apm0: AC on, battery charge high, estimated 2:17 hours
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf8e80/96 (4 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0xffff product 0xffff
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x9800
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Toshiba PCI" rev 0x2c
vga1 at pci0 dev 4 function 0 "Chips and Technologies 65555" rev 0xc6
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ohci0 at pci0 dev 11 function 0 "NEC USB" rev 0x02: irq 11, version 1.0
"Toshiba Fast Infrared Type O" rev 0x21 at pci0 dev 17 function 0 not configured
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "NEC OHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
wdc0 at isa0 port 0x1f0/8 irq 14
wd0 at wdc0 channel 0 drive 0: <TOSHIBA MK4310MAT>
wd0: 16-sector PIO, LBA, 4126MB, 8452080 sectors
wd0(wdc0:0:0): using BIOS timings
wdc1 at isa0 port 0x170/8 irq 15
atapiscsi0 at wdc1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-220EA, 7.0A> ATAPI 5/cdrom removable
cd0(wdc1:0:0): using BIOS timings
sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.01
midi0 at sb0: <SB MIDI UART>
audio0 at sb0
opl0 at sb0: model OPL3
midi1 at opl0: <SB Yamaha OPL3>
wss0 at isa0 port 0x530/8 irq 10 drq 0: CS4231 or AD1845 (vers 4)
audio1 at wss0
pcppi0 at isa0 port 0x61
midi2 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/65536
pcic0 controller 0: <Intel 82365SL rev 1> has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
ne3 at pcmcia1 function 0 "corega K.K., corega Ether PCC-TD, " port
0x300/32, irq 3, address <>
pcic0: irq 9, polling enabled
biomask e945 netmask e94d ttymask fbdf
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
Sorry for the noise.
