On Fri, Dec 26, 2008 at 03:16:26PM -0600, Todd T. Fries wrote: > You should try current. I have these very chipsets on a board I have, and > the IDE support works great for PATA drives, haven't plugged in any SATA > drives I will admit, mind showing a dmesg so we can get an idea of how > old a kernel you are running/
I tried the latest snapshot and DMA doesn't working: pciide1 at pci0 dev 8 function 0 vendor "SiS", unknown product 0x0183 rev 0x01: DMA (unsupported), channel 0 wired to native-PCI, channe l 1 wired to native-PCI My full dmesg with the latest snapshot: OpenBSD 4.4-current (GENERIC) #1971: Wed Dec 24 01:45:08 MST 2008 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC real mem = 1026732032 (979MB) avail mem = 996515840 (950MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xfc7b0 (45 entries) bios0: vendor American Megatrends Inc. version "080012" date 08/13/2007 acpi0 at bios0: rev 0 acpi0: tables DSDT FACP APIC MCFG OEMB acpi0: wakeup devices PS2K(S4) PS2M(S4) UAR1(S4) UAR2(S4) PCI0(S4) EUSB(S4) USB_(S4) USB2(S4) USB3(S4) AC97(S4) MC97(S4) MAC_(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: AMD Athlon(tm) 64 Processor 3200+, 2200.35 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu0: AMD erratum 89 present, BIOS upgrade may be required cpu0: apic clock running at 200MHz ioapic0 at mainbus0 apid 1 pa 0xfec00000, version 14, 24 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 2 (P0P6) acpiprt2 at acpi0: bus 3 (P0P7) acpicpu0 at acpi0: PSS acpibtn0 at acpi0: PWRB cpu0: Cool'n'Quiet K8 2200 MHz: speeds: 2200 2000 1800 1000 MHz pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0 "SiS 761 PCI" rev 0x02 agp at pchb0 not configured ppb0 at pci0 dev 1 function 0 "SiS 86C202 VGA" rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "SiS 6330 VGA" rev 0x03 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pcib0 at pci0 dev 2 function 0 "SiS 965 ISA" rev 0x48 pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0x01: 965: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 1 scsibus0 at atapiscsi0: 2 targets, initiator 7 cd0 at scsibus0 targ 0 lun 0: <ATAPI, iHDP118 4, GL03> ATAPI 5/cdrom removable cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 wd0 at pciide0 channel 1 drive 0: <ST380020A> wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 auich0 at pci0 dev 2 function 7 "SiS 7012 AC97" rev 0xa0: apic 1 int 18 (irq 11), SiS7012 AC97 ac97: codec id 0x41445368 (Analog Devices AD1888) ac97: codec features headphone, 20 bit DAC, No 3D Stereo audio0 at auich0 ohci0 at pci0 dev 3 function 0 "SiS 5597/5598 USB" rev 0x0f: apic 1 int 20 (irq 5), version 1.0, legacy support ohci1 at pci0 dev 3 function 1 "SiS 5597/5598 USB" rev 0x0f: apic 1 int 21 (irq 3), version 1.0, legacy support ohci2 at pci0 dev 3 function 2 "SiS 5597/5598 USB" rev 0x0f: apic 1 int 22 (irq 5), version 1.0, legacy support ehci0 at pci0 dev 3 function 3 "SiS 7002 USB" rev 0x00: apic 1 int 23 (irq 5) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "SiS EHCI root hub" rev 2.00/1.00 addr 1 "SiS 190" rev 0x00 at pci0 dev 4 function 0 not configured ppb1 at pci0 dev 6 function 0 "SiS PCI-PCI" rev 0x00 pci2 at ppb1 bus 2 ppb2 at pci0 dev 7 function 0 "SiS PCI-PCI" rev 0x00 pci3 at ppb2 bus 3 pciide1 at pci0 dev 8 function 0 vendor "SiS", unknown product 0x0183 rev 0x01: DMA (unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide1: using apic 1 int 17 (irq 5) for native-PCI interrupt wd1 at pciide1 channel 0 drive 0: <ExcelStor Technology J8160S> wd1: 16-sector PIO, LBA48, 152627MB, 312581808 sectors pciide1: channel 1 ignored (not responding; disabled or no drives?) rl0 at pci0 dev 9 function 0 "Accton MPX 5030/5038" rev 0x10: apic 1 int 17 (irq 5), address 00:e0:29:6a:8e:10 rlphy0 at rl0 phy 0: RTL internal PHY pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00 pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00 pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00 kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00 ppb3 at pci0 dev 31 function 0 "SiS PCI-PCI" rev 0x00 pci4 at ppb3 bus 4 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 it0 at isa0 port 0x2e/2: IT8712F rev 8, EC port 0xa10 usb1 at ohci0: USB revision 1.0 uhub1 at usb1 "SiS OHCI root hub" rev 1.00/1.00 addr 1 usb2 at ohci1: USB revision 1.0 uhub2 at usb2 "SiS OHCI root hub" rev 1.00/1.00 addr 1 usb3 at ohci2: USB revision 1.0 uhub3 at usb3 "SiS OHCI root hub" rev 1.00/1.00 addr 1 mtrr: Pentium Pro MTRR support softraid0 at root root on wd0a swap on wd0b dump on wd0b -- Reni Maroufi i...@maroufi.net