Greetings,
I managed to find a USB to PS/2 connector. Here is the output for trace.
I typed it out as I do not yet have a serial connection...
ddb{0}> trace
Debugger(1,292,e0917edc,d3f80000,d079b79c) at Debugger+0x4
panic(d06eaec0,d3f80014,2d,d079b79c,d079fb30) at panic+0x55
config_detach(d3f80000,1,e0917f6c,d0360f8d) at config_detach+0x9f
config_detach_children(d3f58900) at pci_detach_devices+0x14
workq_thread(d079fb20) at workq_thread+0x26
Bad frame pointer: 0xd095de78
Gmail mangles the output for "ps" that I was going to add here, so I
put the screenshots online:
http://picasaweb.google.com/brakeb/OpenbsdPanic?feat=directlink
They should be open to anyone...
I will run by Frye's on my way home tomorrow and see about getting a
serial port card that is compatible with OpenBSD.
Regards,
Bryan Brake
On Sun, Dec 28, 2008 at 2:35 PM, Bryan <bra...@gmail.com> wrote:
> Greetings,
>
> I am installing i386 -current on my new box, and I've come into a
> panic on startup. Installation via tftp went without a hitch using
> "re0" to install. After installation, upon start-up, I receive the
> following:
>
> mtrr: Pentium Pro MTRR support
> panic: config_detach: forced detach of re0 failed (45)
> Stopped at Debugger+0x4: leave
>
> I can't give you more than that because the USB quits working at that
> point and I'm forced to hard shutdown. After this occurred, I went to
> UKC> and set "disable re", and the system was able to boot.
>
> I'm running GENERIC.MP, and have tried booting GENERIC.SP, but it also
> panics at the same point. Once started up, I also cannot get the zyd0
> USB wireless nic to connect to my wpa2 network. It works fine and can
> connect when using That Other OS. Fortunately, I've a rum(4) that
> works flawlessly.
>
> I'm subscribed to the list. please ask questions. This is more of a
> nuisance, since I've installed the OS, I can use wireless to connect
> to the internet. But I looked in my mail archive in the last year or
> so, and have not seen anything like the problem I'm having... hell,
> this box doesn't even have a serial port... :(
>
> Regards,
> Bryan
>
> Here is a dmesg with the re(4) nic disabled:
>
> OpenBSD 4.4-current (GENERIC.MP) #20: Wed Dec 24 01:56:16 MST 2008
> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel"
> 686-class) 2.41 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
> real mem = 3488833536 (3327MB)
> avail mem = 3384791040 (3227MB)
> User Kernel Config
> UKC> disable re
> 111 re* disabled
> 112 re* disabled
> UKC> exit
> Continuing...
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 11/07/08, BIOS32 rev. 0 @
> 0xf0010, SMBIOS rev. 2.5 @ 0xf06e0 (54 entries)
> bios0: vendor American Megatrends Inc. version "5.33" date 11/07/2008
> bios0: HP-Pavilion FK484AV-ABA m9400t
> acpi0 at bios0: rev 0
> acpi0: tables DSDT FACP APIC MCFG OEMB HPET GSCI SLIC SSDT
> acpi0: wakeup devices P0P2(S4) P0P1(S4) PS2K(S3) PS2M(S3) USB0(S3)
> USB1(S3) USB2(S3) USB5(S3) EUSB(S3) USB3(S3) USB4(S3) USBE(S3)
> GBE_(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4)
> SLPB(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 266MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel"
> 686-class) 2.40 GHz
> cpu1:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
> cpu2 at mainbus0: apid 2 (application processor)
> cpu2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel"
> 686-class) 2.40 GHz
> cpu2:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel"
> 686-class) 2.40 GHz
> cpu3:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
> ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
> acpihpet0 at acpi0: 14318179 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 1 (P0P1)
> acpiprt2 at acpi0: bus 3 (P0P4)
> acpiprt3 at acpi0: bus -1 (P0P5)
> acpiprt4 at acpi0: bus 2 (P0P6)
> acpiprt5 at acpi0: bus -1 (P0P7)
> acpiprt6 at acpi0: bus -1 (P0P8)
> acpiprt7 at acpi0: bus -1 (P0P9)
> acpicpu0 at acpi0
> acpicpu1 at acpi0
> acpicpu2 at acpi0
> acpicpu3 at acpi0
> acpibtn0 at acpi0: SLPB
> acpibtn1 at acpi0: PWRB
> bios0: ROM list: 0xc0000/0xe200
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02
> ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x02: apic 4 int 16 (irq
> 5)
> pci1 at ppb0 bus 5
> vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x06e0 rev 0xa1
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 4
> int 16 (irq 5)
> uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 4
> int 21 (irq 3)
> ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 4
> int 18 (irq 10)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 4
> int 17 (irq 11)
> pci2 at ppb1 bus 3
> ppb2 at pci2 dev 0 function 0 vendor "Creative Labs", unknown product
> 0x7006 rev 0x00
> pci3 at ppb2 bus 4
> azalia0 at pci3 dev 0 function 0 vendor "Creative Labs", unknown
> product 0x0009 rev 0x00: apic 4 int 16 (irq 5)
> azalia0: codecs: Creative Labs/0x000a
> audio0 at azalia0
> ppb3 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x02: apic 4
> int 18 (irq 10)
> pci4 at ppb3 bus 2
> "Realtek 8168" rev 0x02 at pci4 dev 0 function 0 not configured
> uhci2 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 4
> int 23 (irq 14)
> uhci3 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 4
> int 19 (irq 15)
> uhci4 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 4
> int 18 (irq 10)
> uhci5 at pci0 dev 29 function 3 "Intel 82801I USB" rev 0x02: apic 4
> int 16 (irq 5)
> ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 4
> int 23 (irq 14)
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
> pci5 at ppb4 bus 1
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02: PM disabled
> ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x02: apic 4
> int 19 (irq 15), AHCI 1.2
> scsibus0 at ahci0: 32 targets, initiator 32
> sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD3200AAJS-6, 01.0> SCSI3 0/direct
> fixed
> sd0: 305245MB, 512 bytes/sec, 625142448 sec total
> cd0 at scsibus0 targ 1 lun 0: <ATAPI, DVD A DH16A6L-C, ZHCD> ATAPI
> 5/cdrom removable
> ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic
> 4 int 18 (irq 10)
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5
> spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-6400CL5
> spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL5
> spdmem3 at iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-6400CL5
> usb2 at uhci0: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci1: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci2: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb5 at uhci3: USB revision 1.0
> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb6 at uhci4: USB revision 1.0
> uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb7 at uhci5: USB revision 1.0
> uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> mtrr: Pentium Pro MTRR support
> zyd0 at uhub0 port 3 configuration 1 interface 0 "ZyDAS USB2.0 WLAN"
> rev 2.00/48.02 addr 2
> umass0 at uhub1 port 5 configuration 1 interface 0 "Generic
> USB2.0-CRW" rev 2.00/51.95 addr 2
> umass0: using SCSI over Bulk-Only
> scsibus1 at umass0: 2 targets, initiator 0
> sd1 at scsibus1 targ 1 lun 0: <Generic-, Compact Flash, 1.00> SCSI0
> 0/direct removable
> sd1: drive offline
> sd2 at scsibus1 targ 1 lun 1: <Generic-, SM/xD-Picture, 1.00> SCSI0
> 0/direct removable
> sd2: drive offline
> sd3 at scsibus1 targ 1 lun 2: <Generic-, SD/MMC, 1.00> SCSI0 0/direct
> removable
> sd3: drive offline
> sd4 at scsibus1 targ 1 lun 3: <Generic-, MS/MS-Pro, 1.00> SCSI0
> 0/direct removable
> sd4: drive offline
> uhidev0 at uhub1 port 5 configuration 1 interface 1 "Generic
> USB2.0-CRW" rev 2.00/51.95 addr 2
> uhidev0: iclass 3/0
> uhid0 at uhidev0: input=1, output=0, feature=0
> uhidev1 at uhub7 port 1 configuration 1 interface 0 "Logitech USB
> Receiver" rev 1.10/38.10 addr 2
> uhidev1: iclass 3/1
> ukbd0 at uhidev1: 8 modifier keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev2 at uhub7 port 1 configuration 1 interface 1 "Logitech USB
> Receiver" rev 1.10/38.10 addr 2
> uhidev2: iclass 3/1, 17 report ids
> ums0 at uhidev2 reportid 2: 8 buttons, Z dir
> wsmouse0 at ums0 mux 0
> uhid1 at uhidev2 reportid 3: input=4, output=0, feature=0
> uhid2 at uhidev2 reportid 4: input=1, output=0, feature=0
> uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
> uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
> softraid0 at root
> root on sd0a swap on sd0b dump on sd0b
> zyd0: HMAC ZD1211, FW 46.05, RF AL2230, PA 0, address 00:02:72:52:4a:1f
