Greetings, I have this new box, and the thing has an Nvidia 9300GE for a video card. It appears to have an HDMI output, as well as a DVI. I was wondering if anyone was able to get X to function with this. OR, if there is a way for me to get it to work using any of the various "X" commands.
Right now, the dmesg says the following: > vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x06e0 rev 0xa1 According to the nv(4) page, it should be supported. I ran xorgconfig and set the Geforce driver, but receive a "no screens found" error. I don't mind the "read 'man 8 make-it-work'" comments. I have had Intel video in the past, and they just worked. My old inspiron 9300 has an Nvidia card that just works. I am assuming that it is just too new to be supported yet. Any help is appreciated... Regards, Bryan Brake Here is the dmesg of the box: > OpenBSD 4.4-current (GENERIC.MP) #20: Wed Dec 24 01:56:16 MST 2008 > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP > cpu0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" > 686-class) 2.41 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR > real mem = 3488833536 (3327MB) > avail mem = 3384791040 (3227MB) > User Kernel Config > UKC> disable re > 111 re* disabled > 112 re* disabled > UKC> exit > Continuing... > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 11/07/08, BIOS32 rev. 0 @ > 0xf0010, SMBIOS rev. 2.5 @ 0xf06e0 (54 entries) > bios0: vendor American Megatrends Inc. version "5.33" date 11/07/2008 > bios0: HP-Pavilion FK484AV-ABA m9400t > acpi0 at bios0: rev 0 > acpi0: tables DSDT FACP APIC MCFG OEMB HPET GSCI SLIC SSDT > acpi0: wakeup devices P0P2(S4) P0P1(S4) PS2K(S3) PS2M(S3) USB0(S3) > USB1(S3) USB2(S3) USB5(S3) EUSB(S3) USB3(S3) USB4(S3) USBE(S3) > GBE_(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) > SLPB(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: apic clock running at 266MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" > 686-class) 2.40 GHz > cpu1: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR > cpu2 at mainbus0: apid 2 (application processor) > cpu2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" > 686-class) 2.40 GHz > cpu2: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR > cpu3 at mainbus0: apid 3 (application processor) > cpu3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" > 686-class) 2.40 GHz > cpu3: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR > ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (P0P1) > acpiprt2 at acpi0: bus 3 (P0P4) > acpiprt3 at acpi0: bus -1 (P0P5) > acpiprt4 at acpi0: bus 2 (P0P6) > acpiprt5 at acpi0: bus -1 (P0P7) > acpiprt6 at acpi0: bus -1 (P0P8) > acpiprt7 at acpi0: bus -1 (P0P9) > acpicpu0 at acpi0 > acpicpu1 at acpi0 > acpicpu2 at acpi0 > acpicpu3 at acpi0 > acpibtn0 at acpi0: SLPB > acpibtn1 at acpi0: PWRB > bios0: ROM list: 0xc0000/0xe200 > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02 > ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x02: apic 4 int 16 (irq > 5) > pci1 at ppb0 bus 5 > vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x06e0 rev 0xa1 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 4 > int 16 (irq 5) > uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 4 > int 21 (irq 3) > ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 4 > int 18 (irq 10) > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 4 > int 17 (irq 11) > pci2 at ppb1 bus 3 > ppb2 at pci2 dev 0 function 0 vendor "Creative Labs", unknown product > 0x7006 rev 0x00 > pci3 at ppb2 bus 4 > azalia0 at pci3 dev 0 function 0 vendor "Creative Labs", unknown > product 0x0009 rev 0x00: apic 4 int 16 (irq 5) > azalia0: codecs: Creative Labs/0x000a > audio0 at azalia0 > ppb3 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x02: apic 4 > int 18 (irq 10) > pci4 at ppb3 bus 2 > "Realtek 8168" rev 0x02 at pci4 dev 0 function 0 not configured > uhci2 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 4 > int 23 (irq 14) > uhci3 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 4 > int 19 (irq 15) > uhci4 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 4 > int 18 (irq 10) > uhci5 at pci0 dev 29 function 3 "Intel 82801I USB" rev 0x02: apic 4 > int 16 (irq 5) > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 4 > int 23 (irq 14) > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92 > pci5 at ppb4 bus 1 > ichpcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02: PM disabled > ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x02: apic 4 > int 19 (irq 15), AHCI 1.2 > scsibus0 at ahci0: 32 targets, initiator 32 > sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD3200AAJS-6, 01.0> SCSI3 0/direct > fixed > sd0: 305245MB, 512 bytes/sec, 625142448 sec total > cd0 at scsibus0 targ 1 lun 0: <ATAPI, DVD A DH16A6L-C, ZHCD> ATAPI > 5/cdrom removable > ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic > 4 int 18 (irq 10) > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5 > spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-6400CL5 > spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL5 > spdmem3 at iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-6400CL5 > usb2 at uhci0: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci1: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci2: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb5 at uhci3: USB revision 1.0 > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb6 at uhci4: USB revision 1.0 > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb7 at uhci5: USB revision 1.0 > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at ichpcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > mtrr: Pentium Pro MTRR support > zyd0 at uhub0 port 3 configuration 1 interface 0 "ZyDAS USB2.0 WLAN" > rev 2.00/48.02 addr 2 > umass0 at uhub1 port 5 configuration 1 interface 0 "Generic > USB2.0-CRW" rev 2.00/51.95 addr 2 > umass0: using SCSI over Bulk-Only > scsibus1 at umass0: 2 targets, initiator 0 > sd1 at scsibus1 targ 1 lun 0: <Generic-, Compact Flash, 1.00> SCSI0 > 0/direct removable > sd1: drive offline > sd2 at scsibus1 targ 1 lun 1: <Generic-, SM/xD-Picture, 1.00> SCSI0 > 0/direct removable > sd2: drive offline > sd3 at scsibus1 targ 1 lun 2: <Generic-, SD/MMC, 1.00> SCSI0 0/direct > removable > sd3: drive offline > sd4 at scsibus1 targ 1 lun 3: <Generic-, MS/MS-Pro, 1.00> SCSI0 > 0/direct removable > sd4: drive offline > uhidev0 at uhub1 port 5 configuration 1 interface 1 "Generic > USB2.0-CRW" rev 2.00/51.95 addr 2 > uhidev0: iclass 3/0 > uhid0 at uhidev0: input=1, output=0, feature=0 > uhidev1 at uhub7 port 1 configuration 1 interface 0 "Logitech USB > Receiver" rev 1.10/38.10 addr 2 > uhidev1: iclass 3/1 > ukbd0 at uhidev1: 8 modifier keys, 6 key codes > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev2 at uhub7 port 1 configuration 1 interface 1 "Logitech USB > Receiver" rev 1.10/38.10 addr 2 > uhidev2: iclass 3/1, 17 report ids > ums0 at uhidev2 reportid 2: 8 buttons, Z dir > wsmouse0 at ums0 mux 0 > uhid1 at uhidev2 reportid 3: input=4, output=0, feature=0 > uhid2 at uhidev2 reportid 4: input=1, output=0, feature=0 > uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0 > uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0 > softraid0 at root > root on sd0a swap on sd0b dump on sd0b > zyd0: HMAC ZD1211, FW 46.05, RF AL2230, PA 0, address 00:02:72:52:4a:1f
