On Tue, Jan 06, 2009 at 10:16:01PM +0900, Jordi Beltran Creix wrote: > I hadn't noticed this until now and I don't know if this is a known > issue(sorry I didn't find anything in the lists) or something I am > doing wrong. My laptop has a dual headphone jack but only the left > jack is working in OpenBSD. The hardware is okay and everything else > seems to be working. > > Thank you > > $ dmesg | grep azalia
this info is useless, since about half of the azalia info is missing. > $ mixerctl -a there's no need for -a, and if you're asking questions, always use -v. > inputs.dac_mute=off > inputs.dac=126,126 > inputs.dac2_mute=off > inputs.dac2=126,126 > inputs.dac4_mute=off > inputs.dac4=126,126 > inputs.dac3_mute=off > inputs.dac3=126,126 > inputs.vendor_mute=off > inputs.vendor=126,126 > outputs.hp_source=dac > outputs.hp_dir=output > outputs.hp_boost=off > outputs.spkr_source=dac > outputs.spkr_dir=output > outputs.spkr_boost=off > outputs.mic_source=dac4 > outputs.mic_dir=input > outputs.line_source=dac3 > outputs.line_dir=output > inputs.sel_source=mic > outputs.sel=126,126 > inputs.sel2_source=mic > outputs.sel2=126,126 > inputs.sel3_source=mic > outputs.sel3=126,126 > inputs.sel4_source=sel > inputs.sel4_sel=126,126 > inputs.sel5_source=sel2 > inputs.sel5_sel2=126,126 > inputs.sel6_source=sel3 > inputs.sel6_sel3=126,126 > record.adc_source=sel4 > record.adc_mute=off > record.adc2_source=sel5 > record.adc2_mute=off > record.adc3_source=sel6 > record.adc3_mute=off > outputs.SPDIF_source=dig-dac > inputs.beep=85 > outputs.hp_sense=plugged > outputs.mic_sense=plugged > outputs.line_sense=unplugged > outputs.master=126,126 > outputs.master.mute=off > outputs.master.slaves=dac,vendor > record.volume=0,0 > record.volume.mute=off > record.volume.slaves=adc,adc2,adc3 > inputs.usingdac=02030504 > your device only advertises one hp jack. what is the other one? I find it hard to believe that there are really two jacks there that are by default "headphones". only the one marked hp and the speaker are capable of headphone boost. if a manufaturer is serious about calling a jack a "headphones" jack, then it will have headphone boost capabillity. now, if what you're asking about is the line-out jack, I need to know what your other choices are for this 'outputs.line_source=dac3'. that's part of the info that got lost from your dmesg by running it through grep. it would also be shown by using -v with mixerctl. and I'll save the trouble, if you can set it to 'dac', then that's what you need to do. -- [email protected] SDF Public Access UNIX System - http://sdf.lonestar.org
