On Wed, Jan 7, 2009 at 2:10 AM, Jonathan Gray <[email protected]> wrote:
> Try this and run 'make' in /usr/src/sys/dev/usb before
> building a kernel.
Oh man, thank you so much for this! Now will just need to see if I can
make it work as an accesspoint :)
run0 at uhub0 port 4 "Cisco-Linksys LLC Dual-Band Wireless-N USB
Network Adapter" rev 2.00/1.01 addr 2
run0: MAC/BBP RT2860 (rev 0x0103), RF RT2850 (MIMO 2T2R), address
00:1e:e5:e0:2b:c1
run0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:1e:e5:e0:2b:c1
priority: 0
groups: wlan
media: IEEE802.11 autoselect
status: no network
ieee80211: nwid ""
Cheers,
Steph
