On Thu, Jan 8, 2009 at 9:51 AM, Jonathan Gray <[email protected]> wrote:
> On Thu, Jan 08, 2009 at 09:32:47AM -0500, Dan Colish wrote:
> >
> > The latest patch works great for me. I was not able to write disklabels
> with
> > the prior patch, probably due to the block write code missing. As soon as
> I
> > get the card up, I'll post some i/o benchmarks.
>
> Well it's an SD card, don't expect miracles.
>
> Here is a bonus revised revised patch that lets you use SD cards
> after SDHC cards by storing the flag state in a better card specific
> state structure.
>
> I'd appreciate it if people testing this stuff could test on
> a range of SDHC and normal cards and tell me what size cards/
> which controllers they are testing against.
>
> Thanks
>
> Index: sdmmc.c
> ===================================================================
> RCS file: /cvs/src/sys/dev/sdmmc/sdmmc.c,v
> retrieving revision 1.16
> diff -u -p -r1.16 sdmmc.c
> --- sdmmc.c 2 Dec 2008 23:49:54 -0000 1.16
> +++ sdmmc.c 8 Jan 2009 12:49:43 -0000
> @@ -569,6 +569,32 @@ sdmmc_go_idle_state(struct sdmmc_softc *
> }
>
> /*
> + * Send the "SEND_IF_COND" command, to check operating condition
> + */
> +int
> +sdmmc_send_if_cond(struct sdmmc_softc *sc, uint32_t card_ocr)
> +{
> + struct sdmmc_command cmd;
> + uint8_t pat = 0x23;
> + uint8_t res;
> +
> + bzero(&cmd, sizeof cmd);
> +
> + cmd.c_opcode = SD_SEND_IF_COND;
> + cmd.c_arg = ((card_ocr & SD_OCR_VOL_MASK) != 0) << 8 | pat;
> + cmd.c_flags = SCF_CMD_BCR | SCF_RSP_R7;
> +
> + if (sdmmc_mmc_command(sc, &cmd) != 0)
> + return 1;
> +
> + res = cmd.c_resp[0];
> + if (res != pat)
> + return 1;
> + else
> + return 0;
> +}
> +
> +/*
> * Retrieve (SD) or set (MMC) the relative card address (RCA).
> */
> int
> Index: sdmmc_mem.c
> ===================================================================
> RCS file: /cvs/src/sys/dev/sdmmc/sdmmc_mem.c,v
> retrieving revision 1.9
> diff -u -p -r1.9 sdmmc_mem.c
> --- sdmmc_mem.c 2 Dec 2008 23:49:54 -0000 1.9
> +++ sdmmc_mem.c 8 Jan 2009 12:49:43 -0000
> @@ -93,6 +93,9 @@ sdmmc_mem_enable(struct sdmmc_softc *sc)
> /* Tell the card(s) to enter the idle state (again). */
> sdmmc_go_idle_state(sc);
>
> + if (sdmmc_send_if_cond(sc, card_ocr) == 0)
> + host_ocr |= SD_OCR_SDHC_CAP;
> +
> /* Send the new OCR value until all cards are ready. */
> if (sdmmc_mem_send_op_cond(sc, host_ocr, NULL) != 0) {
> DPRINTF(("%s: can't send memory OCR\n", SDMMCDEVNAME(sc)));
> @@ -224,14 +227,23 @@ sdmmc_decode_csd(struct sdmmc_softc *sc,
> * specification version 1.0 - 1.10. (SanDisk, 3.5.3)
> */
> csd->csdver = SD_CSD_CSDVER(resp);
> - if (csd->csdver != SD_CSD_CSDVER_1_0) {
> + switch (csd->csdver) {
> + case SD_CSD_CSDVER_2_0:
> + sf->flags |= SFF_SDHC;
> + csd->capacity = SD_CSD_V2_CAPACITY(resp);
> + csd->read_bl_len = SD_CSD_V2_BL_LEN;
> + break;
> + case SD_CSD_CSDVER_1_0:
> + csd->capacity = SD_CSD_CAPACITY(resp);
> + csd->read_bl_len = SD_CSD_READ_BL_LEN(resp);
> + break;
> + default:
> printf("%s: unknown SD CSD structure version
> 0x%x\n",
> SDMMCDEVNAME(sc), csd->csdver);
> return 1;
> + break;
> }
>
> - csd->capacity = SD_CSD_CAPACITY(resp);
> - csd->read_bl_len = SD_CSD_READ_BL_LEN(resp);
> } else {
> csd->csdver = MMC_CSD_CSDVER(resp);
> if (csd->csdver != MMC_CSD_CSDVER_1_0 &&
> @@ -403,7 +415,10 @@ sdmmc_mem_read_block(struct sdmmc_functi
> cmd.c_blklen = sf->csd.sector_size;
> cmd.c_opcode = (datalen / cmd.c_blklen) > 1 ?
> MMC_READ_BLOCK_MULTIPLE : MMC_READ_BLOCK_SINGLE;
> - cmd.c_arg = blkno << 9;
> + if (sf->flags & SFF_SDHC)
> + cmd.c_arg = blkno;
> + else
> + cmd.c_arg = blkno << 9;
> cmd.c_flags = SCF_CMD_ADTC | SCF_CMD_READ | SCF_RSP_R1;
>
> error = sdmmc_mmc_command(sc, &cmd);
> @@ -458,7 +473,10 @@ sdmmc_mem_write_block(struct sdmmc_funct
> cmd.c_blklen = sf->csd.sector_size;
> cmd.c_opcode = (datalen / cmd.c_blklen) > 1 ?
> MMC_WRITE_BLOCK_MULTIPLE : MMC_WRITE_BLOCK_SINGLE;
> - cmd.c_arg = blkno << 9;
> + if (sf->flags & SFF_SDHC)
> + cmd.c_arg = blkno;
> + else
> + cmd.c_arg = blkno << 9;
> cmd.c_flags = SCF_CMD_ADTC | SCF_RSP_R1;
>
> error = sdmmc_mmc_command(sc, &cmd);
> Index: sdmmcreg.h
> ===================================================================
> RCS file: /cvs/src/sys/dev/sdmmc/sdmmcreg.h,v
> retrieving revision 1.3
> diff -u -p -r1.3 sdmmcreg.h
> --- sdmmcreg.h 18 Mar 2007 22:21:21 -0000 1.3
> +++ sdmmcreg.h 8 Jan 2009 12:49:44 -0000
> @@ -38,6 +38,7 @@
>
> /* SD commands */ /* response type */
> #define SD_SEND_RELATIVE_ADDR 3 /* R6 */
> +#define SD_SEND_IF_COND 8 /* R7 */
>
> /* SD application commands */ /* response type */
> #define SD_APP_SET_BUS_WIDTH 6 /* R1 */
> @@ -66,6 +67,9 @@
> #define MMC_OCR_1_7V_1_8V (1<<5)
> #define MMC_OCR_1_6V_1_7V (1<<4)
>
> +#define SD_OCR_SDHC_CAP (1<<30)
> +#define SD_OCR_VOL_MASK 0xFF8000 /* bits 23:15 */
> +
> /* R1 response type bits */
> #define MMC_R1_READY_FOR_DATA (1<<8) /* ready for next transfer
> */
> #define MMC_R1_APP_CMD (1<<5) /* app. commands supported
> */
> @@ -134,6 +138,7 @@
> /* SD R2 response (CSD) */
> #define SD_CSD_CSDVER(resp) MMC_RSP_BITS((resp), 126, 2)
> #define SD_CSD_CSDVER_1_0 0
> +#define SD_CSD_CSDVER_2_0 1
> #define SD_CSD_TAAC(resp) MMC_RSP_BITS((resp), 112, 8)
> #define SD_CSD_TAAC_1_5_MSEC 0x26
> #define SD_CSD_NSAC(resp) MMC_RSP_BITS((resp), 104, 8)
> @@ -150,6 +155,9 @@
> #define SD_CSD_C_SIZE(resp) MMC_RSP_BITS((resp), 62, 12)
> #define SD_CSD_CAPACITY(resp) ((SD_CSD_C_SIZE((resp))+1) << \
> (SD_CSD_C_SIZE_MULT((resp))+2))
> +#define SD_CSD_V2_C_SIZE(resp) MMC_RSP_BITS((resp), 48, 22)
> +#define SD_CSD_V2_CAPACITY(resp) ((SD_CSD_V2_C_SIZE((resp))+1) <<
> 10)
> +#define SD_CSD_V2_BL_LEN 0x9 /* 512 */
> #define SD_CSD_VDD_R_CURR_MIN(resp) MMC_RSP_BITS((resp), 59, 3)
> #define SD_CSD_VDD_R_CURR_MAX(resp) MMC_RSP_BITS((resp), 56, 3)
> #define SD_CSD_VDD_W_CURR_MIN(resp) MMC_RSP_BITS((resp), 53, 3)
> Index: sdmmcvar.h
> ===================================================================
> RCS file: /cvs/src/sys/dev/sdmmc/sdmmcvar.h,v
> retrieving revision 1.12
> diff -u -p -r1.12 sdmmcvar.h
> --- sdmmcvar.h 2 Dec 2008 23:49:54 -0000 1.12
> +++ sdmmcvar.h 8 Jan 2009 12:49:44 -0000
> @@ -98,6 +98,7 @@ struct sdmmc_command {
> #define SCF_RSP_R5 (SCF_RSP_PRESENT|SCF_RSP_CRC|SCF_RSP_IDX)
> #define SCF_RSP_R5B
> (SCF_RSP_PRESENT|SCF_RSP_CRC|SCF_RSP_IDX|SCF_RSP_BSY)
> #define SCF_RSP_R6 (SCF_RSP_PRESENT|SCF_RSP_CRC|SCF_RSP_IDX)
> +#define SCF_RSP_R7 (SCF_RSP_PRESENT|SCF_RSP_CRC|SCF_RSP_IDX)
> int c_error; /* errno value on completion */
>
> /* Host controller owned fields for data xfer in progress */
> @@ -135,6 +136,7 @@ struct sdmmc_function {
> u_int16_t rca; /* relative card address */
> int flags;
> #define SFF_ERROR 0x0001 /* function is poo; ignore it */
> +#define SFF_SDHC 0x0002 /* SD High Capacity card */
> SIMPLEQ_ENTRY(sdmmc_function) sf_list;
> /* SD card I/O function members */
> int number; /* I/O function number or -1 */
> @@ -200,6 +202,7 @@ void sdmmc_go_idle_state(struct sdmmc_so
> int sdmmc_select_card(struct sdmmc_softc *, struct sdmmc_function *);
> int sdmmc_set_relative_addr(struct sdmmc_softc *,
> struct sdmmc_function *);
> +int sdmmc_send_if_cond(struct sdmmc_softc *, uint32_t);
>
> void sdmmc_intr_enable(struct sdmmc_function *);
> void sdmmc_intr_disable(struct sdmmc_function *);
>
When I attempted to copy files to the sdhc card, I got an out of inodes
error.
uid 0 on /tmp/home: out of inodes
I created the filesystem using newfs.
I then unmounted and tried to remount to now luck. Just pulling the card
produced this error.
Data modified on freelist: word 7 of object 0xd21fd400 size 0x32c previous
type UVM amap (0xefffeecf != 0xefffeecc)
I'm also having some trouble with unmounting/mounting. The device unmounts
but when I try to remount I get device is busy. I
