Hi Misc,
I was upgrading my Libretto 70CT from 4.3 to 4.4 and following a
successful install my libretto crashed at cpu_switch the same
happened with 4.4-current from the 30 Dec 08.
The output from ps and trace are shown:
Stopped at cpu_switchto+0x90: popl %ebx
ddb> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
8 0 0 0 2 0x100200 pfpurge
7 0 0 0 2 0x100200 pcic0,0,1
6 0 0 0 2 0x100200 pcic0,0,0
5 0 0 0 2 0x100200 apm0
4 0 0 0 2 0x100200 syswq
3 0 0 0 2 0x100200 idle0
2 0 0 0 2 0x100200 kmthread
* 1 0 0 0 7 0 swapper
0 -1 0 0 3 0x80200 wdccmd swapper
ddb> trace
cpu_switchto(d0799154,d0b19000,d0958f18,d03603dd,d0b19000) at cpu_switchto+0x90
cfdata(d0b19000,d0b19000,0,d0958f20,100) at cfdata+0x4188
config_attach(0,d0791020,0,0,d079b7b8) at config_attach+0xfd
config_rootfound(d06ddef7,0,d0958fa0,d034bcd5,2) at config_rootfound+0x27
main(0,0,0,0,0) at main+0x4af
ddb> boot power off
This is the first time since 2.9 that my libretto has crashed on boot
- can anyone point me in the
right direction to help me fix this issue...
Thanks
Fred
The complete dmesg are shown below:
Script started on Sun Jan 11 10:28:09 2009
x41:fred ~> cu -l /dev/cuaU0 -s9600
can't open log file /var/log/aculog.
Connected
boot>
booting hd0a:/bsd:
/-\|/5985916-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\+1058856
[52+332768|/-\|/-\|/-\|/-\|/-\+315493|/-\|/-\|/-\|/-\|/-]=0x756494
entry point at 0x200120
[ using 648688 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2008 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 4.4-current (GENERIC) #1643: Tue Dec 30 13:50:47 MST 2008
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium/MMX ("GenuineIntel" 586-class) 121 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MMX
cpu0: F00F bug workaround installed
real mem = 16478208 (15MB)
avail mem = 5894144 (5MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/11/97
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 3%
apm0: AC on, battery charge low, charging
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xe4000/0xc000
cpu0 at mainbus0: (uniprocessor)
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
vga0 at isa0 port 0x3b0/48 iomem 0xa0000/131072
wsdisplay0 at vga0 mux 1: console (80x25, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
wdc0 at isa0 port 0x1f0/8 irq 14
wd0 at wdc0 channel 0 drive 0: <IBM-DDLA-21620>
wd0: 16-sector PIO, LBA, 1551MB, 3177216 sectors
wd0(wdc0:0:0): using BIOS timings
sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.01
midi0 at sb0: <SB MIDI UART>
audio0 at sb0
opl0 at sb0: model OPL3
midi1 at opl0: <SB Yamaha OPL3>
wss0 at isa0 port 0x530/8 irq 10 drq 0: CS4231 or AD1845 (vers 4)
audio1 at wss0
pcppi0 at isa0 port 0x61
midi2 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/65536
pcic0 controller 0: <Intel 82365SL rev 1> has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
pcic0: irq 9, polling enabled
biomask e945 netmask e945 ttymask fbdf
softraid0 at root
kernel: integer divide fault trap, code=0
Stopped at cpu_switchto+0x90: popl %ebx
ddb> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
8 0 0 0 2 0x100200 pfpurge
7 0 0 0 2 0x100200 pcic0,0,1
6 0 0 0 2 0x100200 pcic0,0,0
5 0 0 0 2 0x100200 apm0
4 0 0 0 2 0x100200 syswq
3 0 0 0 2 0x100200 idle0
2 0 0 0 2 0x100200 kmthread
* 1 0 0 0 7 0 swapper
0 -1 0 0 3 0x80200 wdccmd swapper
ddb> trace
cpu_switchto(d0799154,d0b19000,d0958f18,d03603dd,d0b19000) at cpu_switchto+0x90
cfdata(d0b19000,d0b19000,0,d0958f20,100) at cfdata+0x4188
config_attach(0,d0791020,0,0,d079b7b8) at config_attach+0xfd
config_rootfound(d06ddef7,0,d0958fa0,d034bcd5,2) at config_rootfound+0x27
main(0,0,0,0,0) at main+0x4af
ddb> boot power off
Attempting to power down...
