it has been working since yesterday morning...
thanks for your work!
2:0:0: Attansic Technology L1
0x0000: Vendor ID: 1969 Product ID: 1048
0x0004: Command: 0006 Status ID: 0010
0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: b0
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 08
0x0010: BAR mem 64bit addr: 0x00000000fe8c0000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1043 Product ID: 8226
0x0030: Expansion ROM Base Address: fe8a0000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0a Min Gnt: 00 Max Lat: 00
0x0040: Capability 0x01: Power Management
0x0048: Capability 0x05: Message Signaled Interrupts (MSI)
0x0058: Capability 0x10: PCI Express
0x006c: Capability 0x03: Vital Product Data (VPD)
age0 at pci3 dev 0 function 0 "Attansic Technology L1" rev 0xb0: apic
2 int 17 (irq 10), address 00:1f:c6:ac:b6:4b
ukphy0 at age0 phy 0: Generic IEEE 802.3u media interface, rev. 5: OUI
0x001374, model 0x0001
age0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:1f:c6:ac:b6:4b
priority: 0
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255
inet6 fe80::21f:c6ff:feac:b64b%age0 prefixlen 64 scopeid 0x1
--
see ya,
giovanni
