I cannot get SMC2209USB/ETH to work on 4.1 or 4.4.
The device seems to get an inconsistent MAC address.
The media is locked at "none". If I try to set it then I get
SIOCSIFMEDIA Invalid argument.
I tried disabling USB Legacy Support in the BIOS, but that did not help?
Thanks,
Steven
************************************
# dmesg
OpenBSD 4.4 (GENERIC) #1021: Tue Aug 12 17:16:55 MDT 2008
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(TM) XP 2700+ ("AuthenticAMD" 686-class, 256KB L2 cache)
2.17 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 536420352 (511MB)
avail mem = 510263296 (486MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/02/04, BIOS32 rev. 0 @ 0xf1940,
SMBIOS rev. 2.3 @ 0xf38a0 (54 entries)
bios0: vendor Award Software, Inc. version "ASUS A7V600 ACPI BIOS
Revision 1008" date 09/02/2004
bios0: ASUSTeK Computer INC. A7V600
apm0 at bios0: Power Management spec V1.2 (BIOS management disabled)
apm0: APM power management enable: unrecognized device ID (9)
apm0: APM engage (device 1): power management disabled (1)
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x1ff2
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf1f20/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C586 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8377 PCI" rev 0x80
ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00
pci1 at ppb0 bus 1
skc0 at pci0 dev 9 function 0 "3Com 3c940" rev 0x12, Yukon (0x1): irq 11
sk0 at skc0 port A: address 00:0e:a6:89:ad:44
eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 3
vga1 at pci0 dev 12 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: v3, aperture at 0xfe000000, size 0xe200000
drm at vga1 unsupported
pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA
pciide0: using irq 9 for native-PCI interrupt
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <HITACHI, CDR-7930, 1023> ATAPI 5/cdrom
removable
cd0(pciide1:0:0): using PIO mode 3, DMA mode 1
wd0 at pciide1 channel 1 drive 0: <Maxtor 6Y250P0>
wd0: 16-sector PIO, LBA48, 239372MB, 490234752 sectors
wd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 6
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 5
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 5
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 9
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 9
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00
iic0 at viapm0
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC3200CL3.0
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: irq 11
ac97: codec id 0x41445370 (Analog Devices AD1980)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auvia0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8712F rev 0x05, EC port 0x290
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ef65 netmask ef65 ttymask ffff
mtrr: Pentium Pro MTRR support
axe0 at uhub0 port 2 configuration 1 interface 0 "ASIX Electronics USB
2.0 10/100 ethernet controller" rev 2.00/0.01 addr 2
axe0: AX88172, address 00:94:22:d1:00:94
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
# ifconfig -m axe0
axe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:94:22:d1:00:94
media: Ethernet none (none)
supported media:
media none
inet6 fe80::294:22ff:fed1:94%axe0 prefixlen 64 scopeid 0x4
#
************************************
--
Steven R. Gerber
Gerber Systems Design
http://www.Gerber-Systems.com
