hi
so far i've upgraded the bios. it does not solve the problem but the
system does not hang anymore but prompts for the root device. below
there 2 dmesg versions with a current i386 mp kernel. one where acpi
is disabled an another with acpi enabled.
cheers
dmesg: acpi enabled
-------------------
OpenBSD 4.4-current (GENERIC.MP) #38: Fri Jan 16 14:54:04 MST 2009
t...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 CPU 4400 @ 2.00GHz ("GenuineIntel" 686-
class) 2 GHz
cpu0:
FPU
,V86
,DE
,PSE
,TSC
,MSR
,PAE
,MCE
,CX8
,APIC
,SEP
,MTRR
,PGE
,MCA
,CMOV
,PAT
,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-
CPL,EST,TM2,CX16,xTPR
real mem = 2138599424 (2039MB)
avail mem = 2059649024 (1964MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/28/07, BIOS32 rev. 0 @
0xfa8f0, SMBIOS rev. 2.4 @ 0xf0100 (39 entries)
bios0: vendor Award Software International, Inc. version "F6" date
05/28/2007
bios0: Gigabyte Technology Co., Ltd. 945GM-S2
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP HPET MCFG APIC SSDT SSDT
acpi0: wakeup devices PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(S5)
PEX5(S5) HUB0(S5) UAR1(S1) UAR2(S1) USB0(S1) USB1(S1) USB2(S1)
USB3(S1) USBE(S1) AZAL(S5) PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: counter not incrementing
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU 4400 @ 2.00GHz ("GenuineIntel" 686-
class) 2 GHz
cpu1:
FPU
,V86
,DE
,PSE
,TSC
,MSR
,PAE
,MCE
,CX8
,APIC
,SEP
,MTRR
,PGE
,MCA
,CMOV
,PAT
,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-
CPL,EST,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEX0)
acpiprt2 at acpi0: bus 2 (PEX1)
acpiprt3 at acpi0: bus -1 (PEX2)
acpiprt4 at acpi0: bus -1 (PEX3)
acpiprt5 at acpi0: bus -1 (PEX4)
acpiprt6 at acpi0: bus -1 (PEX5)
acpiprt7 at acpi0: bus 3 (HUB0)
acpicpu0 at acpi0: FVS, 2000, 1600, 1200 MHz
acpicpu1 at acpi0
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xa800!
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945G Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82945G Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16 (irq 5)
drm0 at inteldrm0
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01:
apic 2 int 16 (irq 5)
azalia0: codecs: Realtek ALC883
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 2
int 16 (irq 5)
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: apic 2
int 17 (irq 10)
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x01: RTL8168 2
(0x3800), apic 2 int 17 (irq 10), address 00:0f:ea:5f:c4:ca
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2
int 23 (irq 9)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2
int 19 (irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2
int 18 (irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2
int 16 (irq 5)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2
int 23 (irq 9)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci3 at ppb2 bus 3
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM
disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01:
DMA, channel 0 configured to native-PCI, channel 1 configured to
native-PCI
pciide0: using apic 2 int 19 (irq 0) for native-PCI interrupt
pciide0: couldn't map channel 0 cmd regs
pciide0: couldn't map channel 1 cmd regs
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01:
apic 2 int 19 (irq 11)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8718F rev 1, EC port 0x290
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
softraid0 at root
root device:
dmesg: acpi disabled
--------------------
OpenBSD 4.4-current (GENERIC.MP) #38: Fri Jan 16 14:54:04 MST 2009
t...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 CPU 4400 @ 2.00GHz ("GenuineIntel" 686-
class) 2 GHz
cpu0:
FPU
,V86
,DE
,PSE
,TSC
,MSR
,PAE
,MCE
,CX8
,APIC
,SEP
,MTRR
,PGE
,MCA
,CMOV
,PAT
,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-
CPL,EST,TM2,CX16,xTPR
real mem = 2138599424 (2039MB)
avail mem = 2059649024 (1964MB)
User Kernel Config
UKC> find acpi
455 acpi0 at bios0 flags 0x0
UKC> disable acpi
455 acpi0 disabled
UKC> find acpi
455 acpi0 at bios0 disable flags 0x0
UKC> exit
Continuing...
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/28/07, BIOS32 rev. 0 @
0xfa8f0, SMBIOS rev. 2.4 @ 0xf0100 (39 entries)
bios0: vendor Award Software International, Inc. version "F6" date
05/28/2007
bios0: Gigabyte Technology Co., Ltd. 945GM-S2
acpi at bios0 function 0x0 not configured
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU 4400 @ 2.00GHz ("GenuineIntel" 686-
class) 2 GHz
cpu1:
FPU
,V86
,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,SSE3,MWAIT,DS-
CPL,EST,TM2,CX16,xTPR
mpbios0: bus 0 is type PCI
mpbios0: bus 1 is type PCI
mpbios0: bus 2 is type PCI
mpbios0: bus 3 is type PCI
mpbios0: bus 4 is type ISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
pcibios0 at bios0: rev 3.0 @ 0xf0000/0xd094
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfcfa0/224 (12 entries)
pcibios0: PCI Exclusive IRQs: 5 9 10 11
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801GH LPC" rev
0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xa800!
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945G Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82945G Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16 (irq 5)
drm0 at inteldrm0
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01:
apic 2 int 16 (irq 5)
azalia0: codecs: Realtek ALC883
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 2
int 16 (irq 5)
pci_intr_map: bus 0 dev 28 func 0 pin 3; line 11
pci_intr_map: no MP mapping found
pci_intr_map: bus 0 dev 28 func 0 pin 4; line 11
pci_intr_map: no MP mapping found
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: apic 2
int 17 (irq 10)
pci_intr_map: bus 0 dev 28 func 1 pin 3; line 11
pci_intr_map: no MP mapping found
pci_intr_map: bus 0 dev 28 func 1 pin 4; line 11
pci_intr_map: no MP mapping found
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x01: RTL8168 2
(0x3800), apic 2 int 17 (irq 10), address 00:0f:ea:5f:c4:ca
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2
int 23 (irq 9)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2
int 19 (irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2
int 18 (irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2
int 16 (irq 5)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2
int 23 (irq 9)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci_intr_map: bus 0 dev 30 func 0 pin 1; line 10
pci_intr_map: no MP mapping found
pci_intr_map: bus 0 dev 30 func 0 pin 2; line 5
pci_intr_map: no MP mapping found
pci_intr_map: bus 0 dev 30 func 0 pin 3; line 5
pci_intr_map: no MP mapping found
pci_intr_map: bus 0 dev 30 func 0 pin 4; line 5
pci_intr_map: no MP mapping found
pci3 at ppb2 bus 3
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM
disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01:
DMA, channel 0 configured to native-PCI, channel 1 configured to
native-PCI
pciide0: using apic 2 int 19 (irq 0) for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <Maxtor 6B300S0>
wd0: 16-sector PIO, LBA48, 286187MB, 586112591 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-RAM GH22NS30, 1.01>
ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01:
apic 2 int 19 (irq 11)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8718F rev 1, EC port 0x290
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
On Wed, 14 Jan 2009 22:14:03 +0000 (UTC)
Stuart Henderson <s...@spacehopper.org> wrote:
On 2009-01-13, llx <l...@swissonline.ch> wrote:
hi
i just replaced my PATA devices with SATA once. since then bsd.mp
does not boot anymore unil i disable acpi. the kernel hangs (no
panic) after displaying.
this happens on 4.4 but also using current (snapshot). any more
information needed. below you see a dmesc and an acpidump.
full dmesg from the latest snapshot with acpi enabled and with acpi
disabled would be more useful; if you're lucky your machine will
leave the dmesg buffer intact between boots, otherwise you need
a null modem cable to get it.
you may find that bsd (not just bsd.mp) has problems now.
bios0 at mainbus0: AT/286+ BIOS, date 08/11/06, BIOS32 rev. 0 @
0xfab70, SMBIOS rev. 2.3 @ 0xf0100 (39 entries)
bios0: vendor Award Software International, Inc. version "F2" date
08/11/2006
bios0: Gigabyte Technology Co., Ltd. 945GM-S2
looks like there are several newer bioses; changelog doesn't
specifically mention acpi table changes, but it's not unusual to
sneak them in.
--
llx <l...@swissonline.ch>
