On 2009-01-19, Bryan <[email protected]> wrote: > Greetings, > > > I am still having issues with the re(4) interface on my server. I > mentioned this on the list, and was told that the re(4) fix was in. I > am running the 13 Jan 2009 snapshot, and I can still reproduce the > error on a regular basis. It goes like this... > > 1. push the power button > 2. boot openbsd > 3. panic > > panic: config_detach: forced detach of re0 failed (45) > Stopped at Debugger+0x4: leave
This is not what is shown in your pictures. After enabling javascript to see them (*grumble*) I see the ones you have look like this: uvm_fault(0xd080c660, 0x12e52000, 0, 3_) -> e kernel: page fault trap, code=0 Stopped at apic_vectorset+0x50: movl %esi,apic_maxlevel(,%eax,4) apic_vectorset(d3f1d800,0,ff,0,0) at apic_vectorset+0x50 ioapic_enable(d080c660,0,d0965fa0,d034d1a3,d08c1720) at ioapic_enable+0x8f cpu_configure(d08c1720,1,3,0,2) at cpu_configure+0x42 main(0,0,0,0,0) at main+0x3a7 only process in the table is the swapper. > 4. issue "boot sync" > 5. system restarts > 6. re(4) starts with no issues > > if I shutdown, or do a warm reboot, I have to do step 4 and restart the > system. > > I do have a picture of the error I receive when the system is going to > panic. As I have no console, and puc(4) is useless for console use, > the picture can be found here: > > http://picasaweb.google.com/lh/photo/Das3TsaFIvV1I-zKTHvaog?feat=directlink > > I also did a ps, and trace of the system. here is the photo of that. > > http://picasaweb.google.com/lh/photo/l7IN31cOVXa1y8yn74aA8w?feat=directlink > > If someone has any other ideas, please let me know. The dmesg below is > when the server will come up after a "boot sync" and a warm restart. > > I do intend on updating to the latest snapshot (jan 18th) in the next > few minutes. Did that change anything? > Regards, > Bryan Brake > > OpenBSD 4.4-current (GENERIC.MP) #35: Tue Jan 13 10:19:47 MST 2009 > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP > cpu0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" 686-class) > 2.4 > 1 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF > LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16, > xTPR > real mem = 3488833536 (3327MB) > avail mem = 3384754176 (3227MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 10/23/08, BIOS32 rev. 0 @ 0xf0010, > SMBIOS > rev. 2.5 @ 0xf06e0 (54 entries) > bios0: vendor American Megatrends Inc. version "5.32" date 10/23/2008 > bios0: HP-Pavilion FK484AV-ABA m9400t > acpi0 at bios0: rev 0 > acpi0: tables DSDT FACP APIC MCFG OEMB HPET GSCI SLIC SSDT > acpi0: wakeup devices P0P2(S4) P0P1(S4) PS2K(S3) PS2M(S3) USB0(S3) USB1(S3) > USB2 > (S3) USB5(S3) EUSB(S3) USB3(S3) USB4(S3) USBE(S3) GBE_(S4) P0P4(S4) P0P5(S4) > P0P > 6(S4) P0P7(S4) P0P8(S4) P0P9(S4) SLPB(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: apic clock running at 266MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" 686-class) > 2.4 > 0 GHz > cpu1: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF > LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16, > xTPR > cpu2 at mainbus0: apid 2 (application processor) > cpu2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" 686-class) > 2.4 > 0 GHz > cpu2: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF > LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16, > xTPR > cpu3 at mainbus0: apid 3 (application processor) > cpu3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" 686-class) > 2.4 > 0 GHz > cpu3: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF > LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16, > xTPR > ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (P0P1) > acpiprt2 at acpi0: bus 3 (P0P4) > acpiprt3 at acpi0: bus -1 (P0P5) > acpiprt4 at acpi0: bus 2 (P0P6) > acpiprt5 at acpi0: bus -1 (P0P7) > acpiprt6 at acpi0: bus -1 (P0P8) > acpiprt7 at acpi0: bus -1 (P0P9) > acpicpu0 at acpi0 > acpicpu1 at acpi0 > acpicpu2 at acpi0 > acpicpu3 at acpi0 > acpibtn0 at acpi0: SLPB > acpibtn1 at acpi0: PWRB > bios0: ROM list: 0xc0000/0xe200 0xce800/0x1000 > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02 > ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x02: apic 4 int 16 (irq > 5) > pci1 at ppb0 bus 5 > vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 9300 GE" rev 0xa1 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 4 int 16 > (irq > 5) > uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 4 int 21 > (irq > 3) > ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 4 int 18 > (irq > 10) > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 4 int 17 > (irq > 11) > pci2 at ppb1 bus 3 > ppb2 at pci2 dev 0 function 0 vendor "Creative Labs", unknown product 0x7006 > rev > 0x00 > pci3 at ppb2 bus 4 > azalia0 at pci3 dev 0 function 0 vendor "Creative Labs", unknown product > 0x0009 > rev 0x00: apic 4 int 16 (irq 5) > azalia0: codecs: Creative Labs/0x000a > audio0 at azalia0 > ppb3 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x02: apic 4 int 18 > (irq > 10) > pci4 at ppb3 bus 2 > > > > re0 at pci4 dev 0 function 0 "Realtek 8168" rev 0x02: RTL8168C/8111C > (0x3c00), a > pic 4 int 18 (irq 10), address XX:XX:XX:XX:XX:XX sigh, what is the point in obfuscating this? it is not a secret. > rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2 > > > > > uhci2 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 4 int 23 > (irq > 14) > uhci3 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 4 int 19 > (irq > 15) > uhci4 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 4 int 18 > (irq > 10) > uhci5 at pci0 dev 29 function 3 "Intel 82801I USB" rev 0x02: apic 4 int 16 > (irq > 5) > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 4 int 23 > (irq > 14) > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92 > pci5 at ppb4 bus 1 > puc0 at pci5 dev 0 function 0 "NetMos Nm9835" rev 0x01: ports: 2 com, 1 lpt > com3 at puc0 port 0 apic 4 int 17 (irq 11): ns16550a, 16 byte fifo > com4 at puc0 port 1 apic 4 int 17 (irq 11): ns16550a, 16 byte fifo > lpt3 at puc0 port 2: interrupting at apic 4 int 17 (irq 11) > ichpcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02: PM disabled > ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x02: apic 4 int 19 > (irq > 15), AHCI 1.2 > scsibus0 at ahci0: 32 targets, initiator 32 > sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD3200AAJS-6, 01.0> SCSI3 0/direct > fixed > sd0: 305245MB, 512 bytes/sec, 625142448 sec total > cd0 at scsibus0 targ 1 lun 0: <ATAPI, DVD A DH16A6L-C, ZHCD> ATAPI 5/cdrom > removable > ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 4 int 18 > (irq 10) > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5 > spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-6400CL5 > spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL5 > spdmem3 at iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-6400CL5 > usb2 at uhci0: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci1: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci2: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb5 at uhci3: USB revision 1.0 > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb6 at uhci4: USB revision 1.0 > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb7 at uhci5: USB revision 1.0 > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at ichpcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pmsi0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pmsi0 mux 0 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > mtrr: Pentium Pro MTRR support > umass0 at uhub1 port 1 configuration 1 interface 0 "JMicron USB to ATA/ATAPI > Bridge" rev 2.00/1.00 addr 2 > umass0: using SCSI over Bulk-Only > scsibus1 at umass0: 2 targets, initiator 0 > sd1 at scsibus1 targ 1 lun 0: <WDC WD25, 00BEVS-22UST0, > SCSI2 0/direct fixed > sd1: 238475MB, 512 bytes/sec, 488397168 sec total > umass1 at uhub1 port 5 configuration 1 interface 0 "Generic USB2.0-CRW" rev > 2.00 > /51.95 addr 3 > umass1: using SCSI over Bulk-Only > scsibus2 at umass1: 2 targets, initiator 0 > sd2 at scsibus2 targ 1 lun 0: <Generic-, Compact Flash, 1.00> SCSI0 > 0/direct removable > sd2: drive offline > sd3 at scsibus2 targ 1 lun 1: <Generic-, SM/xD-Picture, 1.00> SCSI0 > 0/direct removable > sd3: drive offline > sd4 at scsibus2 targ 1 lun 2: <Generic-, SD/MMC, 1.00> SCSI0 0/direct > removable > sd4: drive offline > sd5 at scsibus2 targ 1 lun 3: <Generic-, MS/MS-Pro, 1.00> SCSI0 > 0/direct removable > sd5: drive offline > uhidev0 at uhub1 port 5 configuration 1 interface 1 "Generic USB2.0-CRW" rev > 2.0 > 0/51.95 addr 3 > uhidev0: iclass 3/0 > uhid0 at uhidev0: input=1, output=0, feature=0 > umass2 at uhub1 port 8 configuration 1 interface 0 "JMicron JM20336 SATA, USB > Co > mbo" rev 2.00/1.00 addr 4 > umass2: using SCSI over Bulk-Only > scsibus3 at umass2: 2 targets, initiator 0cd1 at scsibus3 targ 1 lun > 0: <HL-DT-ST, BDDVDRW GGC-H20L, 1.03> SCSI0 5/cdrom removable > softraid0 at root > root on sd0a swap on sd0b dump on sd0b
