hi,
i have an error compiling xenocrara on current. here are the steps i made:
/usr/src is updated from cvs and compiled ok
/usr/xenocara is updated from cvs
then:
rm -rf /usr/xobj/*
cd /usr/xenocara
make bootstrap
make obj
make build
[...]
make: don't know how to make app-defaults/Xedit-color.ad. Stop in
/usr/xenocara/app/xedit/obj.
*** Error code 2
Stop in /usr/xenocara/app/xedit/obj (line 437 of Makefile).
*** Error code 1
Stop in /usr/xenocara/app/xedit (line 126 of
/usr/X11R6/share/mk/bsd.xorg.mk).
*** Error code 1
Stop in /usr/xenocara/app/xedit (line 187 of
/usr/X11R6/share/mk/bsd.xorg.mk).
*** Error code 1
Stop in /usr/xenocara/app (line 48 of /usr/share/mk/bsd.subdir.mk).
*** Error code 1
Stop in /usr/xenocara (line 48 of /usr/share/mk/bsd.subdir.mk).
155m3.20s real 107m20.82s user 42m53.31s system
any idea?
/var/run/dmesg.boot attached
OpenBSD 4.4-current (GENERIC) #7: Sun Jan 25 22:54:55 CET 2009
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: VIA Samuel 2 ("CentaurHauls" 686-class) 600 MHz
cpu0: FPU,DE,TSC,MSR,MTRR,PGE,MMX
real mem = 502824960 (479MB)
avail mem = 477855744 (455MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 01/06/04, BIOS32 rev. 0 @ 0xfb280, SMBIOS
rev. 2.2 @ 0xf0800 (26 entries)
bios0: vendor Award Software International, Inc. version "6.00 PG" date
01/06/2004
bios0: VIA Technologies, Inc. CLE266-8235
apm0 at bios0: Power Management spec V1.2 (slowidle)
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf44
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfded0/112 (5 entries)
pcibios0: PCI Exclusive IRQs: 5 9 12
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xe000 0xd0000/0x8000!
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8623 PCI" rev 0x00
viaagp0 at pchb0: v2
agp0 at viaagp0: aperture at 0xd0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0 "VIA VT8633 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA CLE266" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
cbb0 at pci0 dev 10 function 0 "Ricoh 5C476 CardBus" rev 0x80: irq 5
cbb1 at pci0 dev 10 function 1 "Ricoh 5C476 CardBus" rev 0x80: irq 12
"VIA VT6306 FireWire" rev 0x80 at pci0 dev 13 function 0 not configured
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 5
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 12
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 9
ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB" rev 0x82: irq 12
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00
iic0 at viapm0
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC3200CL2.5
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel
0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG HD400LD>
wd0: 16-sector PIO, LBA48, 381554MB, 781422768 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x50: irq 9
ac97: codec id 0x49434552 (ICEnsemble VIA VT1616i)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D
audio0 at auvia0
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x74: irq 5, address
00:40:63:da:fb:4a
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 8: OUI 0x004063,
model 0x0032
epic0 at pci0 dev 20 function 0 "SMC 83C170 (EPIC/100)" rev 0x06, SMC9432TX :
irq 12, address 00:e0:29:26:b7:38
qsphy0 at epic0 phy 3: QS6612 10/100 PHY, rev. 1
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x0, lattimer 0x20
pcmcia1 at cardslot1
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
viasio0 at isa0 port 0x2e/2: VT1211 rev 0x02, HM, WDG not activated
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask ff65 netmask ff65 ttymask ffff
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
