All,
Missing infos :
1) The command "fdisk wd0" gives :
Disk: wd0 geometry: 378150/82/63 [1953525168 Sectors]
Offset: 0 Signature: 0xAA55
Starting Ending LBA Info:
#: id C H S - C H S [ start: size ]
-------------------------------------------------------------------------------
0: 00 0 0 0 - 0 0 0 [ 0: 0 ]
unused
1: 00 0 0 0 - 0 0 0 [ 0: 0 ]
unused
2: 00 0 0 0 - 0 0 0 [ 0: 0 ]
unused
*3: A6 0 1 1 - 378149 81 63 [ 63: 1953522837 ]
OpenBSD
2) The command "disklabel wd0" gives :
# /dev/rwd0c:
type: ESDI
disk: ESDI/IDE disk
label: SAMSUNG HD103UJ
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 82
sectors/cylinder: 5166
cylinders: 378150
total sectors: 1953525168
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0 # microseconds
track-to-track seek: 0 # microseconds
drivedata: 0
16 partitions:
# size offset fstype [fsize bsize cpg]
a: 1953522837 63 4.2BSD 2048 16384 1
c: 1953525168 0 unused 0 0
Thanks,
JF
Le vendredi 06 fC)vrier 2009 C 17:44 +0100, Jean-FranC'ois a C)crit :
> Hi All,
>
> I used to have a disk with Ext3 partitions that I just wish to use now
> as a ffs disk in OpenBSD. So I used fdisk and disklabel in order to make
> new system and finally this does not mount returning Invalid argument.
>
> Do I miss something ? I did'nt find a way to format the disk, is this
> required ? I just made a clean new system on it using fdisk and one
> label a containing the whole space.
>
> Please help.
>
> Thanks,
> J-F
