we need the dmesg from the NOT working kernel.
On Sun, Feb 15, 2009 at 08:05:19PM -0600, Craig Brozefsky wrote:
> I was attempting to install a 4.5-beta kernel on my machine, which is
> currently running an older 4.4 beta just fine. The 4.5 boot hands
> immediately after
>
> softraid0 at root
>
> With some wdo (pciide0:0:0) ata timeout messages which I unfrotunately
> cannot capture from that machine. I let it sit there for at least 15
> minutes to see if it would get over it, maybe downgrading it's PIO
> mode or something. It did not.
>
> The messages looked something like:
>
> wd0(pciide1:0:0): timeout
> type: ata
> c_bcount: 512
> c_skip: 0
>
> Any hints?
>
>
> DMESG FROM WORKING KERNEL:
>
> OpenBSD 4.4-beta (GENERIC) #1: Thu Jul 31 01:37:02 CDT 2008
> r...@piracy.kokonino.net:/usr/src/sys/arch/amd64/compile/GENERIC
> real mem = 1060769792 (1011MB)
> avail mem = 1029713920 (982MB)
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0000 (39 entries)
> bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 01/19/2005
> bios0: http://www.abit.com.tw/ AV8 (VIA K8T800P-8237)
> acpi0 at bios0: rev 0
> acpi0: tables DSDT FACP BOOT APIC
> acpi0: wakeup devices PCI0(S5) USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3)
> USB5(S3) USB6(S3) AC97(S5) MC97(S5) UAR1(S5)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpicpu0 at acpi0: PSS
> acpibtn0 at acpi0: PWRB
> cpu0 at mainbus0: (uniprocessor)
> cpu0: AMD Athlon(tm) 64 Processor 3500+, 2247.77 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW
> cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
> 64b/line 16-way L2 cache
> cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
> cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
> cpu0: AMD errata 86, 89, 97, 104 present, BIOS upgrade may be required
> cpu0: Cool'n'Quiet K8 2247 MHz: speeds: 2200 2000 1000 MHz
> pci0 at mainbus0 bus 0: configuration mode 1
> pchb0 at pci0 dev 0 function 0 "VIA K8HTB Host" rev 0x00
> pchb1 at pci0 dev 0 function 1 "VIA K8HTB Host" rev 0x00
> pchb2 at pci0 dev 0 function 2 "VIA K8HTB Host" rev 0x00
> pchb3 at pci0 dev 0 function 3 "VIA K8HTB Host" rev 0x00
> pchb4 at pci0 dev 0 function 4 "VIA K8HTB Host" rev 0x00
> pchb5 at pci0 dev 0 function 7 "VIA K8HTB Host" rev 0x00
> ppb0 at pci0 dev 1 function 0 "VIA K8HTB AGP" rev 0x00
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "ATI Radeon 9200 PRO" rev 0x01
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> agp at vga1 not configured
> "ATI Radeon 9200 PRO Sec" rev 0x01 at pci1 dev 0 function 1 not configured
> "VIA VT6306 FireWire" rev 0x46 at pci0 dev 7 function 0 not configured
> dc0 at pci0 dev 9 function 0 "Lite-On PNIC" rev 0x20: irq 11, address
> 00:c0:f0:56:30:06
> mtdphy0 at dc0 phy 1: MTD972 10/100 PHY, rev. 8
> vge0 at pci0 dev 14 function 0 "VIA VT612x" rev 0x11: irq 10, address
> 00:50:8d:d3:6b:86
> ciphy0 at vge0 phy 1: Cicada CS8201 10/100/1000TX PHY, rev. 2
> pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA
> pciide0: using irq 11 for native-PCI interrupt
> wd0 at pciide0 channel 0 drive 0: <ST3160811AS>
> wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> wd1 at pciide0 channel 1 drive 0: <ST3160811AS>
> wd1: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
> wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
> pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
> channel 0 configured to compatibility, channel 1 configured to compatibility
> pciide1: channel 0 disabled (no drives)
> atapiscsi0 at pciide1 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets, initiator 7
> cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-ROM SR-8582, 0ACA> ATAPI 5/cdrom
> removable
> cd0(pciide1:1:0): using PIO mode 4, DMA mode 2
> uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 5
> uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 5
> uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 11
> uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 11
> ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 11
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
> viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00
> iic0 at viapm0
> spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM non-parity PC3200CL3.0
> auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: irq 11
> ac97: codec id 0x414c4780 (Avance Logic ALC658 rev 0)
> ac97: codec features 20 bit DAC, 18 bit ADC, No 3D Stereo
> audio0 at auvia0
> pchb6 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
> pchb7 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
> pchb8 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
> kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at mainbus0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pmsi0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pmsi0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x41
> wbsio0 port 0x290/2 not configured
> nvram: invalid checksum
> mtrr: Pentium Pro MTRR support
> umass0 at uhub0 port 3 configuration 1 interface 0 "JMicron USB to ATA/ATAPI
> Bridge" rev 2.00/1.00 addr 2
> umass0: using SCSI over Bulk-Only
> scsibus1 at umass0: 2 targets, initiator 0
> sd0 at scsibus1 targ 1 lun 0: <WDC WD10, EACS-65D6B0, 1A01> SCSI2 0/direct
> fixed
> sd0: 953869MB, 121601 cyl, 255 head, 63 sec, 512 bytes/sec, 1953525168 sec
> total
> umass1 at uhub0 port 4 configuration 1 interface 0 "Memorex 1394/USB 2.0
> Drive" rev 2.00/0.01 addr 3
> umass1: using SCSI over Bulk-Only
> scsibus2 at umass1: 2 targets, initiator 0
> cd1 at scsibus2 targ 1 lun 0: <TSSTcorp, CD/DVDW SH-S182D, SB04> SCSI0
> 5/cdrom removable
> uhidev0 at uhub1 port 2 configuration 1 interface 0 "CPS UPS AE550" rev
> 1.10/0.01 addr 2
> uhidev0: iclass 3/0, 24 report ids
> uhid0 at uhidev0 reportid 1: input=0, output=0, feature=1
> uhid1 at uhidev0 reportid 2: input=0, output=0, feature=1
> uhid2 at uhidev0 reportid 3: input=0, output=0, feature=1
> uhid3 at uhidev0 reportid 4: input=0, output=0, feature=1
> uhid4 at uhidev0 reportid 5: input=0, output=0, feature=1
> uhid5 at uhidev0 reportid 6: input=0, output=0, feature=1
> uhid6 at uhidev0 reportid 7: input=0, output=0, feature=6
> uhid7 at uhidev0 reportid 8: input=5, output=0, feature=5
> uhid8 at uhidev0 reportid 9: input=0, output=0, feature=1
> uhid9 at uhidev0 reportid 10: input=0, output=0, feature=1
> uhid10 at uhidev0 reportid 11: input=1, output=0, feature=1
> uhid11 at uhidev0 reportid 12: input=0, output=0, feature=1
> uhid12 at uhidev0 reportid 13: input=0, output=0, feature=1
> uhid13 at uhidev0 reportid 14: input=0, output=0, feature=1
> uhid14 at uhidev0 reportid 15: input=0, output=0, feature=1
> uhid15 at uhidev0 reportid 16: input=0, output=0, feature=2
> uhid16 at uhidev0 reportid 18: input=0, output=0, feature=1
> uhid17 at uhidev0 reportid 20: input=0, output=0, feature=1
> uhid18 at uhidev0 reportid 21: input=0, output=0, feature=1
> uhid19 at uhidev0 reportid 22: input=0, output=0, feature=1
> uhid20 at uhidev0 reportid 24: input=0, output=0, feature=2
> softraid0 at root
> root on wd0a swap on wd0b dump on wd0b
> dc0: failed to force tx and rx to idle state
>
> --
> Sincerely, Craig Brozefsky <cr...@red-bean.com>
