To finish what i started and for the record.
Owain Ainsworth wrote:
>boot -c
>disable agp
>
>Alternatively, could you try and boot -current on that machine? Quite
>some things have changed in that area.
Installed -current from snapshot. The problem remains, but has a new
name: intelagp
boot -c works fine. Tested 3 different video cards. They all worked.
Wich makes me beleave the problem is in the agp bus driver. The machine
is a HP E60 netserver from 1999. Made the disable permanent with
config(8). Because it's just an old rusty junkbox for testing I don't
really mind the agp problem. In case a developer is interested, i've
included some dmesges:
>> OpenBSD/i386 BOOT 3.02
boot> boot
booting hd0a:/bsd: 6019356+1059784 [52+335888+318217]=0x7601a8
entry point at 0x200120
[ using 654532 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2009 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 4.5-beta (GENERIC) #1685: Sun Feb 15 21:05:40 MST 2009
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class, 512KB L2 cache) 552 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,SER,MMX,FXSR,SSE
real mem = 133722112 (127MB)
avail mem = 121044992 (115MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 01/14/00, BIOS32 rev. 0 @ 0xfd80c,
SMBIOS rev. 2.2 @ 0xf0940 (54 entries)
bios0: vendor Phoenix Technologies LTD version "4.06.25 PN" date 01/14/2000
bios0: Hewlett Packard HP NetServer
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC BOOT
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 11, 24 pins
cpu0 at mainbus0: apid 1 (boot processor)
cpu0: disabling processor serial number
cpu0: apic clock running at 100MHz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (PCI1)
acpicpu0 at acpi0
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x5800 0xcd800/0x800
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
intelagp0 at pchb0
>> OpenBSD/i386 BOOT 3.02
boot> boot
booting hd0a:bsd.rd: 5184724+918896 [52+204416+189284]=0x6325d0
entry point at 0x200120
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2009 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 4.5-beta (RAMDISK_CD) #1083: Sun Feb 15 21:21:00 MST 2009
[email protected]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel Pentium III ("GenuineIntel" 686-class, 512KB L2 cache) 552 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,SER,MMX,FXSR,SSE
real mem = 133722112 (127MB)
avail mem = 122679296 (116MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 01/14/00, BIOS32 rev. 0 @ 0xfd80c,
SMBIOS rev. 2.2 @ 0xf0940 (54 entries)
bios0: vendor Phoenix Technologies LTD version "4.06.25 PN" date 01/14/2000
bios0: Hewlett Packard HP NetServer
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC BOOT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 11, 24 pins
cpu0 at mainbus0: apid 1 (boot processor)
cpu0: disabling processor serial number
cpu0: apic clock running at 100MHz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (PCI1)
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x5800 0xcd800/0x800
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Mach64" rev 0x7a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 4 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 4 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HITACHI, CDR-8435, 0010> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
wd0 at pciide0 channel 1 drive 0: <ST3120023A>
wd0: 16-sector PIO, LBA, 114473MB, 234441648 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 4 function 2 "Intel 82371AB USB" rev 0x01: apic 0 int
19 (irq 11)
"Intel 82371AB Power" rev 0x02 at pci0 dev 4 function 3 not configured
ahc0 at pci0 dev 5 function 0 "Adaptec AIC-7895" rev 0x04: apic 0 int 18
(irq 10)
ahc0: Host Adapter Bios disabled. Using default SCSI device parameters
scsibus1 at ahc0: 16 targets, initiator 7
sd0 at scsibus1 targ 0 lun 0: <HP, 9.10GB A 68-SA40, SA40> SCSI2
0/direct fixed
sd0: 8678MB, 512 bytes/sec, 17773524 sec total
ahc1 at pci0 dev 5 function 1 "Adaptec AIC-7895" rev 0x04: apic 0 int 18
(irq 10)
ahc1: Host Adapter Bios disabled. Using default SCSI device parameters
scsibus2 at ahc1: 16 targets, initiator 7
fxp0 at pci0 dev 6 function 0 "Intel 8255x" rev 0x08, i82559: apic 0 int
19 (irq 11), address 00:e0:18:c3:18:2b
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
rl0 at pci0 dev 9 function 0 "Realtek 8139" rev 0x10: apic 0 int 17 (irq
5), address 00:50:fc:4c:9d:6e
rlphy0 at rl0 phy 0: RTL internal PHY
ppb1 at pci0 dev 12 function 0 "DEC 21152 PCI-PCI" rev 0x03
pci2 at ppb1 bus 2
xl0 at pci2 dev 3 function 0 "3Com 3c905C 100Base-TX" rev 0x74: apic 0
int 19 (irq 11), address 00:01:02:ad:4e:67
bmtphy0 at xl0 phy 24: 3C905C internal PHY, rev. 6
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
rd0: fixed, 3800 blocks
softraid0 at root
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 20.0MHz, offset = 0x8
root on rd0a swap on rd0b dump on rd0b
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
(I)nstall, (U)pgrade or (S)hell? s
# reboot
syncing disks... done
rebooting...
