Hello, On Sat, Feb 21, 2009 at 4:26 PM, Hannah Schroeter <han...@schlund.de> wrote: >>CF Reader : CARD READER ROSEWILL|RCR-102 RTL >>USB DVD Drive : a LaCie Lightscribe drive (disconnected from workstation) > > So you're using the internal one?
Yes, I'm using the internal DVD drive, which is hooked up to a SATA port on my MB. Also, how do I get to a terminal without killing my install? I pressed CTRL Z in middle of the part about installing the file sets, and I just wanted to get to the terminal to dmesg. >>Keyboard : Northgate Omnikey Evolution >>Monitor : Sony gdm-f520 > > dmesg output? >From what I can see of the dmesg output (can I pipe it to a command like more or less to read it one screen at a time?; I don't have access to a serial cable, nor do I think my MB has a serial port): DMESG OUTPUT ========== vable sd0: drive offline sd1 at scsci bus2 targ 1 lun 1: <Generic, USB CF Reader, 1.01> SCSI0 0/direct removable sd1: drive offline sd2 at scsibus2 targ 1 lun 2: <Generic, USB SM Reader, 1.02> SCSI0 0/direct removable sd2: drive offline sd3 at scsibus2 targ 1 lun 3: <Generic, USB MS Reader, 1.03> SCSI0 0/direct removable sd3: drive offline uhidev0 at uhub5 port 2 configuration 1 interface 0 "Composite USB PS2 Converter USB to PS2 Adapter V3.01" rev 1.10/3.10 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0 wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub5 port 2 configuration 1 interface 1 "Composite USB PS2 Converter USB to PS2 Adapter V3.10" rev 1.10/3.10 addr 2 uhidev1: icass 3/1, 3 report ids uhid at uhidev1 reportid 1 not configured uhid at uhidev1 reportid 2 not configured uhid at uhidev1 reportid 3 not configured softraid0 at root root on rd0a swap on rd0b dump on rd0b
