Hey there!
I have a Compaq DL580 G1 with 4x700Mhz PIII, 2GB RAM, 2x36GB U320 SCSI
on a HP SmartArray 5300 with 64MB BBU.
It's a general purpose 'hobby' server. The average concurrent
connections are 20-30, mostly resolv queries for bind. The load is
always aroun 1.0 and frequenlty jumps up to 2. Is this normal for
OpenBSD 4.4 on a machine like this?
OpenBSD 4.4 (GENERIC.MP) #0: Sat Dec 6 13:06:44 CET 2008
/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel Pentium III Xeon ("GenuineIntel" 686-class) 702 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 2147037184 (2047MB)
avail mem = 2067615744 (1971MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @
0xf0000, SMBIOS rev. 2.3 @ 0xe6000 (57 entries)
bios0: vendor Compaq version "P20" date 12/17/2002
bios0: Compaq ProLiant DL580
acpi0 at bios0: rev 0, can't enable ACPI
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000! 0xcc000/0x1800
0xcd800/0x4000 0xe8000/0x6000 0xee000/0x2000!
mainbus0: Intel MP Specification (Version 1.4)
cpu0 at mainbus0: apid 3 (boot processor)
cpu0: apic clock running at 100MHz
cpu1 at mainbus0: apid 0 (application processor)
cpu1: Intel Pentium III Xeon ("GenuineIntel" 686-class) 702 MHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel Pentium III Xeon ("GenuineIntel" 686-class) 702 MHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
cpu3 at mainbus0: apid 2 (application processor)
cpu3: Intel Pentium III Xeon ("GenuineIntel" 686-class) 702 MHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
mainbus0: bus 0 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 7 is type PCI
mainbus0: bus 15 is type ISA
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 11, 35 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20HE Host" rev 0x23
pci1 at pchb0 bus 2
"Compaq PCI Hotplug" rev 0x12 at pci1 dev 5 function 0 not
configured
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20HE Host" rev 0x01
pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20HE Host" rev 0x01
pchb3 at pci0 dev 0 function 3 "ServerWorks CNB20HE Host" rev 0x01
pci2 at pchb3 bus 7
"Compaq PCI Hotplug" rev 0x12 at pci2 dev 5 function 0 not
configured
ciss0 at pci2 dev 7 function 0 "Compaq Smart Array 5300 rev.2" rev
0x02: apic 8 int 11 (irq 11)
ciss0: 1 LD, HW rev 0, FW 3.40/3.40
scsibus0 at ciss0: 1 targets, initiator 1
sd0 at scsibus0 targ 0 lun 0: <COMPAQ, LOGICAL VOLUME, 3.40> SCSI0
0/direct fixed
sd0: 34727MB, 4427 cyl, 255 head, 63 sec, 512 bytes/sec, 71122560
sec total
"Compaq Netelligent ASMC" rev 0x00 at pci0 dev 3 function 0 not
configured
cac0 at pci0 dev 4 function 0 "Symbios Logic 53c1510" rev 0x02: apic
8 int 5 (irq 5), Integrated Array
cac0: no volumes defined
vga1 at pci0 dev 5 function 0 "ATI Mach64 GV" rev 0x7a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
drm at vga1 unsupported
fxp0 at pci0 dev 7 function 0 "Intel 8255x" rev 0x08, i82559: apic 8
int 3 (irq 3), address 00:02:a5:3f:e0:ea
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
piixpm0 at pci0 dev 15 function 0 "ServerWorks OSB4" rev 0x51: SMBus
disabled
pciide0 at pci0 dev 15 function 1 "ServerWorks OSB4 IDE" rev 0x00:
DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus1 targ 0 lun 0: <COMPAQ, CD-224E, 9.0C> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
--
Gabri Mate
