Hello,

  I send this messages to [email protected] a few days ago. I don't know if
this is the all the information the developers need. Anyway I would like to
create this thread just for search purposes...may be there is more people
with the same problem. I found a previous thread about this but it seems
nobody talk about the channel problem.

Regards,

-------- Original Message --------
Subject: Acer Aspire One freeze with Atheros AR5424 on OpenBSD 4.5
Date: Thu, 12 Mar 2009 14:48:59 -0600
From: Alvaro Mantilla Gimenez <[email protected]>
To: [email protected]

Hello,

  1) Steps to recreate the issue:

     /sbin/ifconfig ath0 scan


  2) Dmesg of the computer:

   OpenBSD 4.5 (GENERIC) #1749: Sat Feb 28 14:51:18 MST 2009
     [email protected]:/usr/src/sys/arch/i386/compile/GENERIC
RTC BIOS diagnostic error 80<clock_battery>
cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 
1.60 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,xTPR
real mem  = 1060163584 (1011MB)
avail mem = 1016815616 (969MB)
RTC BIOS diagnostic error 80<clock_battery>
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/06/08, SMBIOS rev. 2.4 @ 
0xe9180 (32 entries)
bios0: vendor Acer version "v0.3308" date 10/06/2008
bios0: Acer AOA150
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SSDT HPET APIC MCFG ASF! SLIC BOOT
acpi0: wakeup devices P32_(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) 
ECHI(S3) EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) AZAL(S0) MODM(S0)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (P32_)
acpiprt2 at acpi0: bus 1 (EXP1)
acpiprt3 at acpi0: bus 2 (EXP2)
acpiprt4 at acpi0: bus 3 (EXP3)
acpiprt5 at acpi0: bus 4 (EXP4)
acpiec0 at acpi0
acpicpu0 at acpi0
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: LID0
acpibtn2 at acpi0: SLPB
acpibat0 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpivideo at acpi0 not configured
bios0: ROM list: 0xc0000/0xec00!
cpu0: unknown Enhanced SpeedStep CPU, msr 0x060f0c2006000c20
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 1600 MHz (1212 mV): speeds: 1600, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0x40000000, size 0x10000000
inteldrm0 at vga1: apic 4 int 16 (irq 11)
drm0 at inteldrm0
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: 
apic 4 int 16 (irq 11)
azalia0: codecs: Realtek ALC268
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4 int 
16 (irq 255)
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 4 int 
17 (irq 255)
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL 
(0x2480), apic 4 int 17 (irq 11), address 00:23:8b:50:c0:3e
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 4 int 
18 (irq 255)
pci3 at ppb2 bus 3
ath0 at pci3 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 4 int 18 
(irq 11)
ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR5_ETSIC, address 00:24:2b:02:32:05
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 4 int 
19 (irq 255)
pci4 at ppb3 bus 4
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4 int 
16 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 int 
17 (irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 int 
18 (irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 int 
19 (irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 int 
16 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 5
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM 
disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, 
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST9160310AS>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 4 
int 17 (irq 11)
iic0 at ichiic0
spdmem0 at iic0 addr 0x51: 512MB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
acpibat0: BAT1 inserted
uvideo0 at uhub0 port 5 configuration 1 interface 0 "SuYin Acer Crystal 
Eye webcam" rev 2.00/0.01 addr 2
video0 at uvideo0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b

  3) lspci -vv

03:00.0 Ethernet controller: Atheros Communications Inc. AR242x 
802.11abg Wireless PCI Express Adapter (rev 01)
         Subsystem: Foxconn International, Inc. Device e008
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx-
         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 0
         Interrupt: pin A routed to IRQ 11
         Region 0: Memory at 55200000 (64-bit, non-prefetchable)
         Capabilities: [40] Power Management version 2
                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
         Capabilities: [50] MSI: Mask- 64bit- Count=1/1 Enable-
                 Address: 00000000  Data: 0000
         Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00
                 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s 
<512ns, L1 <64us
                         ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
                         MaxPayload 128 bytes, MaxReadReq 512 bytes
                 DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ 
AuxPwr- TransPend-
                 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, 
Latency L0 <512ns, L1 <64us
                         ClockPM- Suprise- LLActRep- BwNot-
                 LnkCtl: ASPM L0s L1 Enabled; RCB 128 bytes Disabled- 
Retrain- CommClk+
                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
         Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
                 Vector table: BAR=0 offset=00000000
                 PBA: BAR=0 offset=00000000

  4) ddb output (manual transcription):

   panic: trap type 6. code=0, pc=d02af677
   Starting stack trace...
   panic(d07a8c58,0,dbfe1ae0,0,d6a0ac40) at panic+0x65
   panic(d071aea7,6,0,d02af677,d1ad8000) at panic+0x65
   trap() at trap+0x119
   --- trap (number 6) ---
   ath_chan_set(d1ad6000,ffff,dbfe1b90,d0467ef9) at ath_chan_set+0x43
   ath_newstate(d1ad6030,1,ffffffff,d1ad6030) at ath_newstate+0xa4
   ieee80211_ioctl(d1ad6030,802069d2,dbfe1e78,0) at ieee80211_ioctl+0x879
   ath_ioctl(d1ad6030,802069d2,dbfe1e78,dbfe1e78,dbfe1e78) at
ath_ioctl+0x63
in_control(d698fd40,802069d2,dbfe1e78,d1ad6030,d1ad6030,d6a0ac40,d1bfc800,d0361b48)

at in_control+0x118
    ifioctl(d698fd40,802069d2,dbfe1e78,d6a0ac40,d69bd820) at ifioctl+0x1cc
    sys_ioctl(d6a0ac40,dbfe1f68,dbfe1f58,5,40) at sys_ioctl+0x125
    syscall() at syscall+0x24e
    --- syscall (number 54) ---
    0x1c0090b9:
    End of stack trace.
    syncing disks... 7 7 done
    dumping to dev 1, offset 2137557


  Please, let me know if you need something else.

  Regards,


         Alvaro

Reply via email to