Hello,
I want to get some signals from a electronic circuit at my serial-port
com0. I don't know how to attach the pin's from the serial port with the
gpioctl tool. I think it my hardware is not supported, but I don't know
exactly. In my dmesg there is nothing like this:
"gpio0 at gscpcib0: 64 pins"
What could I do to get the signals from my circuit or to get support
with gpio?
thx
ciao, Jan
my dmesg:
OpenBSD 4.5-current (GENERIC.MP) #10: Tue Mar 24 06:45:46 CET 2009
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ ("AuthenticAMD"
686-class, 1024KB L2 cache) 3.05 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16
real mem = 1072984064 (1023MB)
avail mem = 1029214208 (981MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 07/16/07, SMBIOS rev. 2.4 @
0xfbc00 (30 entries)
bios0: vendor American Megatrends Inc. version "P2.10" date 07/16/2007
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC OEMB HPET
acpi0: wakeup devices PS2K(S4) PS2M(S4) UAR1(S4) USB0(S4) MAC_(S5)
AC97(S4) USB1(S4) USB2(S4) P0P1(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 202MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ ("AuthenticAMD"
686-class, 1024KB L2 cache) 3.05 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpihpet0 at acpi0: 25000000 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (P0P1)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xd000 0xcd000/0x1800
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "NVIDIA nForce3 250 PCI Host" rev 0xa1
agp at pchb0 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce3 250 ISA" rev 0xa2
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce3 250 SMBus" rev 0xa1
iic0 at nviic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
iic1 at nviic0
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce3 250 USB" rev 0xa1: apic 2
int 9 (irq 9), version 1.0, legacy support
ohci1 at pci0 dev 2 function 1 "NVIDIA nForce3 250 USB" rev 0xa1: apic 2
int 3 (irq 3), version 1.0, legacy support
ehci0 at pci0 dev 2 function 2 "NVIDIA nForce3 250 USB" rev 0xa2: apic 2
int 9 (irq 9)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1
nfe0 at pci0 dev 5 function 0 "NVIDIA nForce3 LAN" rev 0xa2: apic 2 int
9 (irq 9), address 00:19:66:47:22:e8
rlphy0 at nfe0 phy 1: RTL8201L 10/100 PHY, rev. 1
pciide0 at pci0 dev 8 function 0 "NVIDIA nForce3 250 IDE" rev 0xa2: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <MAXTOR 6L040J2>
wd0: 16-sector PIO, LBA, 38172MB, 78177792 sectors
wd1 at pciide0 channel 0 drive 1: <SAMSUNG SP2014N>
wd1: 16-sector PIO, LBA48, 190782MB, 390721968 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4167B, DL12> ATAPI
5/cdrom removable
wd2 at pciide0 channel 1 drive 1: <Maxtor 92049U6>
wd2: 16-sector PIO, LBA, 19544MB, 40026672 sectors
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
wd2(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 4
pciide1 at pci0 dev 10 function 0 "NVIDIA nForce3 250 SATA" rev 0xa2: DMA
pciide1: using apic 2 int 10 (irq 10) for native-PCI interrupt
wd3 at pciide1 channel 0 drive 0: <ST3500630AS>
wd3: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
wd3(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ppb0 at pci0 dev 11 function 0 "NVIDIA nForce3 250 AGP" rev 0xa2
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon 9800 Pro" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: apic 2 int 11 (irq 11)
drm0 at radeondrm0
"ATI Radeon 9800 Pro Sec" rev 0x00 at pci1 dev 0 function 1 not configured
ppb1 at pci0 dev 14 function 0 "NVIDIA nForce3 250 PCI-PCI" rev 0xa2
pci2 at ppb1 bus 2
rl0 at pci2 dev 9 function 0 "Realtek 8139" rev 0x10: apic 2 int 9 (irq
9), address 00:e0:7d:d3:74:23
rlphy1 at rl0 phy 0: RTL internal PHY
pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00: core
rev JH-F3
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627EHF rev 0x63
lm1 at wbsio0 port 0x290/8: W83627EHF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
uaudio0 at uhub2 port 4 configuration 1 interface 0 "ABC PnP Audio
Device" rev 1.10/0.10 addr 2
uaudio0: audio rev 1.00, 17 mixer controls
audio0 at uaudio0
uhidev0 at uhub1 port 3 configuration 1 interface 0 "Darfon USB Combo
Keyboard" rev 1.10/3.02 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 3 configuration 1 interface 1 "Darfon USB Combo
Keyboard" rev 1.10/3.02 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=4, output=0, feature=0
uhidev2 at uhub1 port 4 configuration 1 interface 0 "Logitech USB-PS/2
Optical Mouse" rev 2.00/27.20 addr 3
uhidev2: iclass 3/1
ums0 at uhidev2: 8 buttons, Z dir
wsmouse0 at ums0 mux 0
softraid0 at root
root on wd1a swap on wd1b dump on wd1b
WARNING: / was not properly unmounted
WARNING: NVRAM century is 32 but RTC year is 2009
/dev/wd3i: file system not clean; please fsck(8)
