Hello,
I'm trying to get -current snapshot working on my laptop but thus far
I've had no luck. Whenever I try to boot bsd.rd my system hangs while
still loading the kernel. This hang seems to happen after it loads
pciide but before any wd drives are detected. I've tried disabling the
following in various combinations but still can't get to a login prompt:
acpi
ehci
uhci
pciide
usb
wd
atapiscsi
cd
I've tried both an April 28th & April 29th bsd.rd, bot have the same
issue. My current November 21st snapshot is still working, dmesg
attached. Any clues?
thx
// nick
OpenBSD 4.4-current (GENERIC.MP) #1156: Fri Nov 21 14:45:01 MST 2008
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Genuine Intel(R) CPU T2300 @ 1.66GHz ("GenuineIntel" 686-class)
1.67 GHz cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR
real mem = 2137432064 (2038MB) avail mem = 2058313728 (1962MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/13/07, BIOS32 rev. 0 @
0xffa10, SMBIOS rev. 2.4 @ 0xf7980 (44 entries) bios0: vendor Dell Inc.
version "A17" date 06/13/2007 bios0: Dell Inc. MM061
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP HPET APIC MCFG SLIC BOOT SSDT
acpi0: wakeup devices LID_(S3) PBTN(S4) MBTN(S5) PCI0(S3) USB0(S3) USB1
(S3) USB2(S3) USB3(S3) EHCI(S3) AZAL(S3) PCIE(S4) RP01(S4) RP02(S3) RP03
(S3) RP04(S3) RP05(S3) RP06(S3) acpitimer0 at acpi0: 3579545 Hz, 24
bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr
0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Genuine Intel(R) CPU T2300 @ 1.66GHz ("GenuineIntel" 686-class)
1.67 GHz cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins ioapic0:
misconfigured as apic 0, remapped to apid 2 acpiprt0 at acpi0: bus 0
(PCI0) acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 3 (PCIE)
acpiprt3 at acpi0: bus 11 (RP01)
acpiprt4 at acpi0: bus -1 (RP02)
acpiprt5 at acpi0: bus -1 (RP03)
acpiprt6 at acpi0: bus 12 (RP04)
acpiprt7 at acpi0: bus -1 (RP05)
acpiprt8 at acpi0: bus -1 (RP06)
acpicpu0 at acpi0: C3
acpicpu1 at acpi0: C3
acpitz0 at acpi0: critical temperature 126 degC
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model " DELLUD2646" serial 933 type LION oem
"Sanyo" acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PBTN
acpibtn2 at acpi0: SBTN
acpivideo at acpi0 not configured
acpivideo at acpi0 not configured
acpivideo at acpi0 not configured
bios0: ROM list: 0xc0000/0xe800! 0xce800/0x1800
cpu0: unknown Enhanced SpeedStep CPU, msr 0x06130a2c06000a2c
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 1667 MHz (1404 mV): speeds: 1667, 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01:
apic 2 int 21 (irq 10) azalia0: codecs: Sigmatel STAC9200,
Conexant/0x2bfa, using Sigmatel STAC9200 audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 2
int 16 (irq 0) pci1 at ppb0 bus 11
wpi0 at pci1 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02:
apic 2 int 16 (irq 4), MoW2, address 00:13:02:46:b3:5a ppb1 at pci0 dev
28 function 3 "Intel 82801GB PCIE" rev 0x01: apic 2 int 19 (irq 0) pci2
at ppb1 bus 12 uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev
0x01: apic 2 int 20 (irq 9) uhci1 at pci0 dev 29 function 1 "Intel
82801GB USB" rev 0x01: apic 2 int 21 (irq 10) uhci2 at pci0 dev 29
function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 22 (irq 7) uhci3 at
pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int 23 (irq
5) ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2
int 20 (irq 9) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel
EHCI root hub" rev 2.00/1.00 addr 1 ppb2 at pci0 dev 30 function 0
"Intel 82801BAM Hub-to-PCI" rev 0xe1 pci3 at ppb2 bus 3
bce0 at pci3 dev 0 function 0 "Broadcom BCM4401B1" rev 0x02: apic 2 int
17 (irq 4), address 00:14:22:d1:bd:2c bmtphy0 at bce0 phy 1: BCM4401
10/100baseTX PHY, rev. 0 "Ricoh 5C832 Firewire" rev 0x00 at pci3 dev 1
function 0 not configured sdhc0 at pci3 dev 1 function 1 "Ricoh 5C822
SD/MMC" rev 0x19: apic 2 int 18 (irq 11) sdmmc0 at sdhc0
"Ricoh 5C843 MMC" rev 0x01 at pci3 dev 1 function 2 not configured
"Ricoh 5C592 Memory Stick" rev 0x0a at pci3 dev 1 function 3 not
configured "Ricoh 5C852 xD" rev 0x05 at pci3 dev 1 function 4 not
configured ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev
0x01: PM disabled pciide0 at pci0 dev 31 function 2 "Intel 82801GBM
SATA" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired
to compatibility wd0 at pciide0 channel 0 drive 0: <FUJITSU MHV2080BH>
wd0: 16-sector PIO, LBA48, 74881MB, 153356490 sectors wd0(pciide0:0:0):
using PIO mode 4, Ultra-DMA mode 5 atapiscsi0 at pciide0 channel 1
drive 0 scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <SONY, DVD+-RW DW-Q58A, UDS1> ATAPI
5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic
2 int 17 (irq 4) iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
