Dmsesg is here:
http://ti.cmtsp.com.br:810/logs/dmesg_OpenBSD4.4_IBM3550.txt
Continuing...
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 01/29/09, BIOS32 rev. 0 @ 0xfd841,
SMBIOS rev. 2.4 @ 0xbffcee80 (86 entries)
bios0: vendor IBM version "-[GFE143AUS-1.13]-" date 01/29/2009
bios0: IBM IBM System x3550 -[7978B1U]-
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xffff
pcibios0: PCI BIOS has 11 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 9 10 11 15
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 6321ESB LPC" rev
0x00)
pcibios0: PCI bus #35 is the last bus
bios0: ROM list: 0xc0000/0xb000 0xcb000/0x1800 0xcc800/0x1800
0xce000/0x5000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x31
ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE x8" rev 0x31
pci1 at ppb0 bus 16
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 17
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 19
ppb3 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01
pci4 at ppb3 bus 18
ppb4 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci5 at ppb4 bus 20
ppb5 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x31
pci6 at ppb5 bus 35
ppb6 at pci0 dev 4 function 0 "Intel 5000 PCIE x8" rev 0x31
pci7 at ppb6 bus 7
ppb7 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x31
pci8 at ppb7 bus 34
ppb8 at pci0 dev 6 function 0 "Intel 5000 PCIE" rev 0x31
pci9 at ppb8 bus 3
ppb9 at pci9 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci10 at ppb9 bus 4
bnx0 at pci10 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 7
ppb10 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x31
pci11 at ppb10 bus 2
"Adaptec ASR-2120S" rev 0x02 at pci11 dev 0 function 0 not configured
"Intel I/OAT" rev 0x31 at pci0 dev 8 function 0 not configured
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x31
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x31
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x31
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x31
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x31
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x31
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x31
ppb11 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09
pci12 at ppb11 bus 5
ppb12 at pci12 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci13 at ppb12 bus 6
bnx1 at pci13 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 3
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: irq 5
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: irq 5
ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb13 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd9
pci14 at ppb13 bus 1
vga1 at pci14 dev 1 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM
disabled
pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-T10N, 1.00> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
"Intel 6321ESB SMBus" rev 0x09 at pci0 dev 31 function 3 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask ff65 netmask ffed ttymask ffff
rd0: fixed, 3800 blocks
uhub4 at uhub2 port 2 "Silitek IBM USB HUB KEYBOARD" rev 1.10/1.00 addr
2
uhidev0 at uhub4 port 1 configuration 1 interface 0 "Silitek IBM USB HUB
KEYBOARD" rev 1.10/1.00 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub4 port 3 configuration 1 interface 0 "vendor 0x15ca USB
Optical Mouse" rev 2.00/5.12 addr 4
uhidev1: iclass 3/1
uhid at uhidev1 not configured
softraid0 at root
root on rd0a swap on rd0b dump on rd0b
bnx1: address 00:1a:64:79:f1:5a
brgphy0 at bnx1 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
bnx0: address 00:1a:64:79:f1:58
brgphy1 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
umass0 at uhub0 port 3 configuration 1 interface 0 "LG Electronics USB
DISK" rev 2.00/11.00 addr 2
umass0: using SCSI over Bulk-Only
-----Mensagem original-----
De: [email protected] [mailto:[email protected]] Em nome de
Ricardo Augusto de Souza
Enviada em: segunda-feira, 6 de abril de 2009 19:12
Para: Chris Cappuccio; [email protected]
Assunto: RES: OpenBSD on IBM 3550
Really?
So http://www.openbsd.org/i386.html is wrong?
Cause we can see this there:
"
RAID and Cache Controllers
ICP-Vortex and Intel GDT series (gdt) (A) (C)
Adaptec FSA-based RAID controllers (aac), including: (*)
Note: In the past years Adaptec has lied to us repeatedly about
forthcoming documentation which would have allowed us to stabilize,
improve and manage RAID support for these (rather buggy) raid
controllers.
As a result, we do not recommend the Adaptec cards for use.
Adaptec AAC-2622, AAC-364, AAC-3642, 2130S, 2200S, 2230SLP, 2410SA,
2610SA, 2810SA, 21610SA
Dell CERC-SATA, PERC 320/DC
Dell PERC 2/QC, PERC 2/Si, PERC 3/Si, PERC 3/D
HP NetRaid-4M
IBM ServeRAID-8i/8k/8s
"
As i cant install openbsd on IBM 3550, I installed FreeBSD 7.1.
This is dmesg:
http://ti.cmtsp.com.br:810/logs/dmesg_FreeBSD7.1_IBM3550.txt
FreeBSD shows:
aac0: <IBM ServeRAID-8k> port 0x4000-0x40ff mem
0xcce00000-0xccffffff,0xcafe0000-0xcaffffff irq 17 at device 0.0 on pci2
aac0: Enable Raw I/O
aac0: Enable 64-bit array
aac0: New comm. interface enabled
aac0: [ITHREAD]
aac0: ServeRAID 8k-l , aac driver 2.0.0-1
-----Mensagem original-----
De: Chris Cappuccio [mailto:[email protected]]
Enviada em: segunda-feira, 6 de abril de 2009 19:07
Para: Ricardo Augusto de Souza
Cc: [email protected]
Assunto: Re: OpenBSD on IBM 3550
your controller isn't supported.
unless it has i2o mode, try something else
Ricardo Augusto de Souza [[email protected]] wrote:
> Hi,
>
>
>
> I have an IBM 3550 with SAS disks and Adaptec ServeRAID 8k controller
> and I AM NOT able to install openBSD on it.
>
> Installation didn't find any hard disk during installation.
>
>
>
> According with http://www.openbsd.org/i386.html
> <http://www.openbsd.org/i386.html> it works with adaptec serveraid.
>
>
>
> If I change SAS to SATA disks will openBSD recognize them at
> installation ?
>
>
>
>
>
> Thanks
--
the conservative, sandwich-heavy portfolio pays off for the hungry
investor.
