man mount
Juan Jimenez Galdos wrote:
> Hi, maybe this is basic, but i can't find my usb device though i think i
> have found it, this is my dmesg (*usb in boldface*):
>
> OpenBSD 4.4 (GENERIC) #1021: Tue Aug 12 17:16:55 MDT 2008
> [email protected]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Pentium(R) 4 CPU 3.40GHz ("GenuineIntel" 686-class) 3.41 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,xTPR
> real mem = 536375296 (511MB)
> avail mem = 510218240 (486MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 09/17/04, BIOS32 rev. 0 @ 0xfb280,
> SMBIOS rev. 2.3 @ 0xf0100 (34 entries)
> bios0: vendor Award Software International, Inc. version "F5 FS" date
> 09/17/2004
> bios0: Fujitsu Siemens GA-8I848PM
> apm0 at bios0: Power Management spec V1.2 (slowidle)
> apm0: AC on, battery charge unknown
> acpi at bios0 function 0x0 not configured
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0xd6d4
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd620/176 (9 entries)
> pcibios0: PCI Exclusive IRQs: 3 5 9 10 11
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371SB ISA" rev 0x00)
> pcibios0: PCI bus #2 is the last bus
> bios0: ROM list: 0xc0000/0xd000 0xd0000/0x8000!
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82865G Host" rev 0x02
> ppb0 at pci0 dev 1 function 0 "Intel 82865G AGP" rev 0x02
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 vendor "ATI", unknown product 0x4e51 rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> agp0 at vga1: aperture at 0xf0000000, size 0x8000000
> drm at vga1 unsupported
> vendor "ATI", unknown product 0x4e71 (class display subclass miscellaneous,
> rev 0x00) at pci1 dev 0 function 1 not configured
> uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 11
> uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 11
> uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: irq 9
> uhci3 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: irq 11
> ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: irq 3
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xc2
> pci2 at ppb1 bus 2
> "TI TSB43AB22 FireWire" rev 0x00 at pci2 dev 10 function 0 not configured
> rl0 at pci2 dev 11 function 0 "Realtek 8139" rev 0x10: irq 11, address
> 00:0f:ea:a6:e9:75
> rlphy0 at rl0 phy 0: RTL internal PHY
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02: 24-bit
> timer at 3579545Hz
> pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA,
> channel 0 configured to compatibility, channel 1 configured to compatibility
> wd0 at pciide0 channel 0 drive 1: <Maxtor 91362U3>
> wd0: 16-sector PIO, LBA, 12982MB, 26588016 sectors
> wd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 4
> atapiscsi0 at pciide0 channel 1 drive 1
> scsibus0 at atapiscsi0: 2 targets, initiator 7
> cd0 at scsibus0 targ 0 lun 0: <_NEC, DVD_RW ND-3500AG, 2.86> ATAPI 5/cdrom
> removable
> cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
> ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: irq 10
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC3200CL3.0
> auich0 at pci0 dev 31 function 5 "Intel 82801EB/ER AC97" rev 0x02: irq 10,
> ICH5 AC97
> ac97: codec id 0x414c4760 (Avance Logic ALC655 rev 0)
> audio0 at auich0
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pmsi0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pmsi0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> wbsio0 at isa0 port 0x2e/2: W83627THF rev 0x85
> lm1 at wbsio0 port 0x290/8: W83627THF
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> biomask ef6d netmask ef6d ttymask ffff
> mtrr: Pentium Pro MTRR support
> umass0 at uhub0 port 1 configuration 1 interface 0 "Genesys USB 2.0 Card"
> rev 2.00/91.44 addr 2
> umass0: using SCSI over Bulk-Only
> scsibus1 at umass0: 2 targets, initiator 0
> *sd0 at scsibus1 targ 1 lun 0: <Generic, STORAGE DEVICE, 9144> SCSI0
> 0/direct removable
> sd0: drive offline
> sd1 at scsibus1 targ 1 lun 1: <Generic, STORAGE DEVICE, 9144> SCSI0 0/direct
> removable
> sd1: drive offline
> sd2 at scsibus1 targ 1 lun 2: <Generic, STORAGE DEVICE, 9144> SCSI0 0/direct
> removable
> sd2: drive offline
> sd3 at scsibus1 targ 1 lun 3: <Generic, STORAGE DEVICE, 9144> SCSI0 0/direct
> removable
> sd3: drive offline
> sd4 at scsibus1 targ 1 lun 4: <Generic, STORAGE DEVICE, 9144> SCSI0 0/direct
> removable*
> sd4: drive offline
> uhub5 at uhub0 port 8 "Genesys Logic USB2.0 Hub" rev 2.00/9.01 addr 3
> uhub6 at uhub3 port 2 "ALCOR Generic USB Hub" rev 1.10/3.12 addr 2
> uhidev0 at uhub6 port 2 configuration 1 interface 0 "G-Tech CHINA USB
> Wireless Mouse & KeyBoard V1.01" rev 2.00/0.20 addr 3
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 modifier keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev1 at uhub6 port 2 configuration 1 interface 1 "G-Tech CHINA USB
> Wireless Mouse & KeyBoard V1.01" rev 2.00/0.20 addr 3
> uhidev1: iclass 3/1, 3 report ids
> uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
> uhid1 at uhidev1 reportid 2: input=4, output=0, feature=0
> ums0 at uhidev1 reportid 3: 3 buttons, Z dir
> wsmouse1 at ums0 mux 0
> uhidev2 at uhub6 port 3 configuration 1 interface 0 "No brand HA2-A3" rev
> 1.10/3.00 addr 4
> uhidev2: iclass 3/0
> ukbd1 at uhidev2: 8 modifier keys, 6 key codes
> wskbd2 at ukbd1 mux 1
> wskbd2: connecting to wsdisplay0
> uhidev3 at uhub6 port 3 configuration 1 interface 1 "No brand HA2-A3" rev
> 1.10/3.00 addr 4
> uhidev3: no input interrupt endpoint
> softraid0 at root
> root on wd0a swap on wd0b dump on wd0b
> WARNING: / was not properly unmounted
> *umass1 at uhub5 port 2 configuration 1 interface 0 " USB DISK Pro" rev
> 2.00/1.00 addr 4*
> umass1: using SCSI over Bulk-Only
> scsibus2 at umass1: 2 targets, initiator 0
> *sd5 at scsibus2 targ 1 lun 0: <, USB DISK Pro, PMAP> SCSI0 0/direct
> removable
> sd5: 118MB, 15 cyl, 255 head, 63 sec, 512 bytes/sec, 243200 sec total
> sd6 at scsibus2 targ 1 lun 1: <, USB DISK Pro, PMAP> SCSI0 0/direct
> removable
> sd6: 1MB, 1 cyl, 1 head, 2880 sec, 512 bytes/sec, 2880 sec total*
>
> The USB is "USB DISK PRO", but sd0 - sd5; usb0 - usb 5 is not the usb. How
> can i find where is mounted? Thank you and sorry if i am too beginner.
