Just installed 2009-04-13 snap.
On Thu, Mar 26, 2009 at 08:33:08PM +0000, Jacob Meuser wrote:
> > > I wonder in particular if there is support for
> > > the pc-card interface
> >
> > Haven't tried yet. I should have a Express Card with in the week that
> > I can test it with.
Works.
Tried a StarTech.com ExpressCard Gigabit Ethernet Adapter EC1000BT
et0 at pci3 dev 0 function 0 "AT&T/Lucent ET1310" rev 0x02: apic 2 int 4 (irq
10), address 00:13:3b:03:03:8a
etphy0 at et0 phy 0: ET1011 10/100/1000baseT PHY, rev. 2
Awfully hot when it came out though.
> > > and the audio device?
> >
> > Nope. I've attached a dmesg from 4.4 I currently have installed.
>
> accrding to lspci output on linux found on the net, there's a vt1708
> hda (azalia) controller on pci bus 128, but the only mention of this
> bus in your dmesg is:
>
> acpiprt6 at acpi0: bus 128 (PCI1)
>
> maybe try a more current -current?
No. dmesg included.
> > > Since it has VIA graphics, running X shouldn't be too much of
> > > an issue...
> >
> > Out of the box X starts, but the mouse pointer isn't visible.
> > I haven't even attempted to fix it.
> >
> > If you're really interested I'll install snap over the weekend
> > and get you the current state.
Haven't tried X yet.
------
OpenBSD 4.5-current (GENERIC) #48: Sun Apr 12 23:43:52 MDT 2009
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: VIA C7-M Processor 1200MHz ("CentaurHauls" 686-class) 1.20 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,SSE3,EST,TM2,xTPR
real mem = 1877241856 (1790MB)
avail mem = 1806376960 (1722MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/04/08, BIOS32 rev. 0 @ 0xf0010, SMBIOS
rev. 2.5 @ 0xfc590 (19 entries)
bios0: vendor Hewlett-Packard version "68VGU Ver. F.04" date 08/04/2008
bios0: Hewlett-Packard HP 2133
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC MCFG SLIC WDRT OEMB HPET SSDT
acpi0: wakeup devices BLAN(S5) SLPB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: RNG AES AES-CTR SHA1 SHA256 RSA
cpu0: apic clock running at 199MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 3, 24 pins
ioapic1 at mainbus0: apid 2 pa 0xfecc0000, version 3, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P1)
acpiprt2 at acpi0: bus 2 (NBPG)
acpiprt3 at acpi0: bus 0 (P0P9)
acpiprt4 at acpi0: bus 7 (P0PA)
acpiprt5 at acpi0: bus 5 (NBP0)
acpiprt6 at acpi0: bus 128 (PCI1)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, PSS
acpitz0 at acpi0: critical temperature 105 degC
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT1 model "Primary" serial 100000 type LiOn oem
"Hewlett-Packard"
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: PWRB
acpivideo at acpi0 not configured
bios0: ROM list: 0xc0000/0xcc00 0xcd000/0x1600
cpu0: unknown Enhanced SpeedStep CPU, msr 0x0406060904000609
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 1200 MHz (844 mV): speeds: 1200, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
extent `pciio' (0x0 - 0xffff), flags=0
0xb800 - 0xb81f
0xb880 - 0xb89f
0xbc00 - 0xbc1f
0xc000 - 0xc0ff
0xc400 - 0xc40f
0xc480 - 0xc483
0xc800 - 0xc807
0xc880 - 0xc883
0xcc00 - 0xcc07
0xd000 - 0xefff
extent `pcimem' (0x0 - 0xffffffff), flags=0
0x1000 - 0x9ffff
0xe0000 - 0x6fefffff
0xc0000000 - 0xcfffffff
0xde000000 - 0xdfffffff
0xf0000000 - 0xfaffffff
0xfbeffc00 - 0xfbeffcff
0xfbf00000 - 0xfeafffff
0xfec00000 - 0xfec00fff
0xfecc0000 - 0xfecc0fff
0xfee00000 - 0xfee00fff
0xfff00000 - 0xffffffff
pchb0 at pci0 dev 0 function 0 "VIA P4M900 Host" rev 0x00
viaagp0 at pchb0: v3
agp0 at viaagp0: aperture at 0xf0000000, size 0x10000000
pchb1 at pci0 dev 0 function 1 "VIA P4M900 Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA P4M900 Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA P4M900 Host" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA P4M900 Host" rev 0x00
"VIA P4M900 IOAPIC" rev 0x00 at pci0 dev 0 function 5 not configured
pchb5 at pci0 dev 0 function 6 "VIA P4M900 Security" rev 0x00
pchb6 at pci0 dev 0 function 7 "VIA P4M900 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA Chrome9 HC IGP" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 2 function 0 "VIA P4M900 PCI-PCI" rev 0x80: apic 2 int 3 (irq
10)
pci2 at ppb1 bus 2
"Broadcom BCM4312" rev 0x02 at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 3 function 0 "VIA P4M900 PCI-PCI" rev 0x80: apic 2 int 7 (irq
10)
pci3 at ppb2 bus 5
pciide0 at pci0 dev 15 function 0 "VIA VT8237S SATA" rev 0x00: DMA
pciide0: using apic 1 int 21 (irq 5) for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHZ2120BH G2>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0xb0: apic 1 int 20 (irq
11)
uhci1 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0xb0: apic 1 int 21 (irq
3)
uhci2 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0xb0: apic 1 int 23 (irq
7)
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x90: apic 1 int 21 (irq 3)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8237S ISA" rev 0x00
iic0 at viapm0
iic0: addr 0x1d 0f=3b 11=0d 12=a6 13=12 14=12 16=06 17=81 18=02 19=01 1a=0d
1b=49 20=47 21=0a 22=01 27=ff 29=fc 2b=fd 2d=30 30=95 31=25 32=14 33=02 34=2a
35=15 36=12 37=02 8f=3b 91=0d 92=a6 93=12 94=12 96=06 97=81 98=02 99=01 9a=0d
9b=49 a0=47 a1=0a a2=01 a7=ff a9=fc ab=fc ad=36 b0=95 b1=25 b2=14 b3=02 b4=2a
b5=15 b6=12 b7=02 words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000
07=0000
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
pchb7 at pci0 dev 17 function 7 "VIA VT8251 VLINK" rev 0x00
pchb8 at pci0 dev 19 function 0 "VIA VT8237A PCI-PCI" rev 0x00
ppb3 at pci0 dev 19 function 1 "VIA VT8237A PCI-PCI" rev 0x00
pci4 at ppb3 bus 7
bge0 at pci4 dev 3 function 0 "Broadcom BCM5788" rev 0x03, BCM5705 A3 (0x3003):
apic 1 int 16 (irq 11), address 00:1f:29:93:d0:92
brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
umass0 at uhub0 port 1 configuration 1 interface 0 "LaCie LaCie DVDRW USB" rev
2.00/0.00 addr 2
umass0: using ATAPI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
cd0 at scsibus0 targ 1 lun 0: <TOSHIBA, CD/DVDW SDR6572M, TU04> ATAPI 5/cdrom
removable
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics Co.,
Ltd. CNF7070" rev 2.00/8.52 addr 3
video0 at uvideo0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
