and cu instead of minicom.
On Mon, Apr 20, 2009 at 06:36:03PM +0200, LEVAI Daniel wrote:
> On Monday 20 April 2009 18.19.13 you wrote:
> > Hi, guys,
> >
> > I have a console line, which is serial console (RS232) on USB. It works
> > well with minicom in my ubuntu 8.04 when I connect it to my netscreen-5xt.
> > But, it can't work with my OpenBSD 4.2.
> > Due to my command line "usbdevs -dv" output, I configure it as these below
> > "Serial Device : /dev/usb1" , Bits setting is "9600 8N1", turn off
> > "hardware Flow Contol ". Unlikely, it can't work.
> I think you should use /dev/cuaU* as device.
>
> HTH,
>
> Daniel
>
> --
> LIVAI Daniel
> PGP key ID = 0x4AC0A4B1
> Key fingerprint = D037 03B9 C12D D338 4412 2D83 1373 917A 4AC0 A4B1
