Below is my dmesg...
Thanks
OpenBSD 4.5-current (GENERIC.MP) #60: Mon Apr 20 23:08:03 MDT 2009
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3477667840 (3316MB)
avail mem = 3362107392 (3206MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xf0000 (45 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 08/13/2008
bios0: OEM OEM
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP HPET MCFG SLIC APIC SSDT
acpi0: wakeup devices PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(S5) PEX5(S5)
HUB0(S5) UAR1(S5) UAR2(S5) USB0(S3) USB1(S3) USB2(S3) USB3(S3) USBE(S3)
AC97(S5) AZAL(S5) PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Pentium(R) Dual CPU E2220 @ 2.40GHz, 2400.26 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CX16,xTPR,NXE,LONG
cpu0: 1MB 64b/line 4-way L2 cache
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) Dual CPU E2220 @ 2.40GHz, 2399.91 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CX16,xTPR,NXE,LONG
cpu1: 1MB 64b/line 4-way L2 cache
ioapic0 at mainbus0 apid 4 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEX0)
acpiprt2 at acpi0: bus 2 (PEX1)
acpiprt3 at acpi0: bus -1 (PEX2)
acpiprt4 at acpi0: bus -1 (PEX3)
acpiprt5 at acpi0: bus -1 (PEX4)
acpiprt6 at acpi0: bus -1 (PEX5)
acpiprt7 at acpi0: bus 3 (HUB0)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpitz0 at acpi0: critical temperature 125 degC
acpibtn0 at acpi0: PWRB
pci0 at mainbus0 bus 0
extent `pciio' (0x0 - 0xffff), flags=0
0x500 - 0x51f
0xb000 - 0xdfff
0xf300 - 0xf30f
0xf400 - 0xf403
0xf500 - 0xf507
0xf600 - 0xf603
0xf700 - 0xf707
0xf800 - 0xf80f
0xfb00 - 0xfb1f
0xfc00 - 0xfc1f
0xfd00 - 0xfd1f
0xfe00 - 0xfe1f
0xff00 - 0xff07
extent `pcimem' (0x0 - 0xffffffff), flags=0
0x0 - 0x9ffff
0xf0000 - 0xcf5fffff
0xd0000000 - 0xefffffff
0xfd800000 - 0xfdf7ffff
0xfdfff000 - 0xfdfff3ff
0xfec00000 - 0xffffffff
pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x10
vga1 at pci0 dev 2 function 0 "Intel 82G33 Video" rev 0x10
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 4 int 16 (irq 9)
drm0 at inteldrm0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 4 int 16
(irq 9)
pci1 at ppb0 bus 1
extent `ppb0 pciio' (0x0 - 0xffff), flags=0
0x0 - 0xbfff
0xd000 - 0xffff
extent `ppb0 pcimem' (0x0 - 0xffffffff), flags=0
0x0 - 0xfd8fffff
0xfda00000 - 0xffffffff
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: apic 4 int 17
(irq 10)
pci2 at ppb1 bus 2
extent `ppb1 pciio' (0x0 - 0xffff), flags=0
0x0 - 0xafff
0xc000 - 0xffff
extent `ppb1 pcimem' (0x0 - 0xffffffff), flags=0
0x0 - 0xfddfffff
0xfdef0000 - 0xffffffff
"Broadcom BCM5784" rev 0x10 at pci2 dev 0 function 0 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 4 int 23
(irq 15)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 4 int 19
(irq 15)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 4 int 18
(irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 4 int 16
(irq 9)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 4 int 23
(irq 15)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci3 at ppb2 bus 3
extent `ppb2 pciio' (0x0 - 0xffff), flags=0
0x0 - 0xcfff
0xd600 - 0xd6ff
0xd800 - 0xd8ff
0xda00 - 0xdaff
0xdc00 - 0xdcff
0xde00 - 0xdeff
0xe000 - 0xffff
extent `ppb2 pcimem' (0x0 - 0xffffffff), flags=0
0x0 - 0xfdafffff
0xfdbfb000 - 0xfdbfb0ff
0xfdbfc000 - 0xfdbfc0ff
0xfdbfd000 - 0xfdbfd0ff
0xfdbfe000 - 0xfdbfe0ff
0xfdbff000 - 0xfdbff0ff
0xfdc00000 - 0xffffffff
rgephy4 at re4 phy 7: RTL8169S/8110S PHY, rev. 3
pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 4 int 19 (irq 15) for native-PCI interrupt
wd0 at pciide1 channel 1 drive 1: <Hitachi HDP725016GLA380>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide1:1:1): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 4
int 19 (irq 15)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem1 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-6400CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8718F rev 4, EC port 0x290
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
On Tue, 21 Apr 2009 20:53:06 +0200, Robert <[email protected]> wrote:
> On Tue, 21 Apr 2009 12:40:48 -0400
> unix3 <[email protected]> wrote:
>
>> Hello,
>>
>> Iam running a FoxConn G31AX-K motherboard with an integrated Broadcom
>> BCM5784 LAN NIC, however even though this is enabled in the BIOS the
>> kernel does not configure it. I tried contacting the creator of the
>> bge driver but he wasnt very kind...
>>
>> I also tried the latest snapshot (4.5-current Apr 20) however the same
>> result happened, not configured. I have been told that the maybe its
>> as easy as adding the PCI ID to the driver table but I dont know how
>> to do this. Anybody have a similar issue? thank you
>>
>> Daniel
>
> dmesg?
>
> - Robert
