first try at a desktop openbsd. I have cups and ghostscript installed
from ports. I have a usb printer hp psc 1510. I have cups configured
enough so port 631 tells me cups is ready to print. I start printer
and the status goes to idle. I test page and the printer stops. I
would like to do something like cat test > /dev/usb/lp0 but I do not
know the values of the device. Please supply.
OpenBSD 4.5 (GENERIC) #2052: Sat Feb 28 14:55:24 MST 2009
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1071513600 (1021MB)
avail mem = 1028304896 (980MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0100 (57 entries)
bios0: vendor Award Software International, Inc. version "F4" date 04/30/2008
bios0: Gigabyte Technology Co., Ltd. GA-MA78GM-S2H
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP SSDT HPET MCFG APIC
acpi0: wakeup devices USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3)
USB5(S3) USB6(S3) SBAZ(S4) P2P_(S5) PCE2(S4) PCE3(S4) PCE4(S4)
PCE5(S4) PCE6(S4) PCE7(S4) PCE9(S4) PCEA(S4) PCEB(S4) PCEC(S4)
PS2M(S5) PS2K(S5) PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpihpet0 at acpi0: 14318180 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 5400+, 2806.36 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: apic clock running at 200MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 21, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (P2P_)
acpiprt2 at acpi0: bus 1 (PCE2)
acpiprt3 at acpi0: bus -1 (PCE3)
acpiprt4 at acpi0: bus -1 (PCE4)
acpiprt5 at acpi0: bus -1 (PCE5)
acpiprt6 at acpi0: bus -1 (PCE6)
acpiprt7 at acpi0: bus -1 (PCE7)
acpiprt8 at acpi0: bus -1 (PCE9)
acpiprt9 at acpi0: bus 2 (PCEA)
acpiprt10 at acpi0: bus -1 (PCEB)
acpiprt11 at acpi0: bus -1 (PCEC)
acpiprt12 at acpi0: bus -1 (AGP_)
acpicpu0 at acpi0: PSS
acpibtn0 at acpi0: PWRB
cpu0: PowerNow! K8 2806 MHz: speeds: 2800 2600 2400 2200 2000 1800 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "AMD RS780 Host" rev 0x00
ppb0 at pci0 dev 2 function 0 "AMD RS780 PCIE" rev 0x00: apic 2 int 18 (irq
5)
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x06e4 rev
0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 10 function 0 "AMD RS780 PCIE" rev 0x00: apic 2 int
18 (irq 5)
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x02: RTL8168C/8111C
(0x3c00), apic 2 int 18 (irq 5), address 00:1f:d0:5a:ce:f7
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
pciide0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: DMA
(unsupported), channel 0 configured to native-PCI, channel 1
configured to native-PCI
pciide0: using apic 2 int 22 (irq 11) for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST3320620AS>
wd0: 16-sector PIO, LBA48, 305244MB, 625140335 sectors
pciide0: channel 1 ignored (not responding; disabled or no drives?)
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int
16 (irq 3), version 1.0, legacy support
ohci1 at pci0 dev 18 function 1 "ATI SB700 USB" rev 0x00: apic 2 int
16 (irq 3), version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int
17 (irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci2 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int
18 (irq 5), version 1.0, legacy support
ohci3 at pci0 dev 19 function 1 "ATI SB700 USB" rev 0x00: apic 2 int
18 (irq 5), version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int
19 (irq 11)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x3a: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-4200CL5
pciide1 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x00: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD RW AD-7200A, 1.06> ATAPI
5/cdrom removable
cd0(pciide1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4
azalia0 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic
2 int 16 (irq 3)
azalia0: codecs: Realtek ALC885
audio0 at azalia0
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x00
ppb2 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
pci3 at ppb2 bus 3
rl0 at pci3 dev 6 function 0 "Realtek 8139" rev 0x10: apic 2 int 20
(irq 10), address 00:21:27:c6:61:87
rlphy0 at rl0 phy 0: RTL internal PHY
"TI TSB43AB23 FireWire" rev 0x00 at pci3 dev 14 function 0 not configured
ohci4 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 2 int
18 (irq 5), version 1.0, legacy support
pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00:
core rev BH-G2
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci2: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci3: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8718F rev 5, EC port 0x228
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
usb6 at ohci4: USB revision 1.0
uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
ulpt0 at uhub2 port 1 configuration 1 interface 1 "HP PSC 1500 series"
rev 2.00/1.00 addr 2
ulpt0: using bi-directional mode
uhidev0 at uhub2 port 2 configuration 1 interface 0 "Microsoft
Natural\M-. Ergonomic Keyboard 4000" rev 2.00/1.73 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 2 configuration 1 interface 1 "Microsoft
Natural\M-. Ergonomic Keyboard 4000" rev 2.00/1.73 addr 3
uhidev1: iclass 3/0, 1 report id
uhid0 at uhidev1 reportid 1: input=7, output=0, feature=0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
