$ more .xinitrc
/usr/X11R6/bin/xset b
/usr/X11R6/bin/xset m 10/0
/usr/X11R6/bin/xset fp+ /usr/local/lib/X11/fonts/terminus
/usr/X11R6/bin/xset fp+ /usr/local/openoffice/share/fonts/truetype
xrandr --output LVDS --auto
xrandr --output VGA --auto --right-of LVDS
scrotwm
On Thu, Apr 23, 2009 at 05:40:38PM +0200, Tom???? Bod????r wrote:
> Hi all,
>
> I don't try it yet so you can kick my ass if I'm missing something ;-)
>
> Is there a possibility to just use xrandr(1) for switching between
> outputs if my X work out of the box without xorg.conf?
> Because I have 'not configured' for my Intel GM45.I read that support
> for this chipset isn't full yet.When I have laptop in
> docking station I have on HDMI-1 Dell E2209W with optimal resolution
> 1680x1050/60Hz,but both (HDMI-1 and LVDS)
> are working on 1024x768/60Hz which isn't so much usefull.
>
> $ dmesg | grep vga
> vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> intagp0 at vga1
> inteldrm0 at vga1: apic 2 int 16 (irq 11)
> $ dmesg | grep GM45
> pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
> vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
> "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
> $
>
> $ xrandr --verbose
> Screen 0: minimum 320 x 200, current 1440 x 900, maximum 1440 x 1440
> VGA disconnected (normal left inverted right x axis y axis)
> Identifier: 0x3b
> Timestamp: -753984668
> Subpixel: unknown
> Clones:
> CRTCs: 0 1
> LVDS connected 1440x900+0+0 (0x40) normal (normal left inverted right
> x axis y axis) 304mm x 190mm
> Identifier: 0x3c
> Timestamp: -753984668
> Subpixel: horizontal rgb
> Clones:
> CRTC: 1
> CRTCs: 1
> EDID_DATA:
> 00ffffffffffff00320c400100000000
> 00120103901e13780ad7859359548c29
> 22505400000001010101010101010101
> 010101010101b027a08051841a303020
> 360030be1000001ab027a0805184e731
> 3020aa0030be1000001a000000fe0043
> 54303038803134315750320a00000000
> 00000000000000000002010a202000ea
> PANEL_FITTING: full
> supported: center full_aspect full
> BACKLIGHT_CONTROL: combination
> supported: native legacy combination kernel
> BACKLIGHT: 101 (0x00000065) range: (0,101)
> 1440x900 (0x40) 101.6MHz +HSync -VSync *current +preferred
> h: width 1440 start 1488 end 1520 total 1824 skew 0 clock
> 55.7KHz
> v: height 900 start 903 end 909 total 926 clock 60.2Hz
> 1440x900 (0x41) 101.6MHz +HSync -VSync
> h: width 1440 start 1488 end 1520 total 1824 skew 0 clock
> 55.7KHz
> v: height 900 start 910 end 920 total 1387 clock 40.2Hz
> 1024x768 (0x42) 65.0MHz -HSync -VSync
> h: width 1024 start 1048 end 1184 total 1344 skew 0 clock
> 48.4KHz
> v: height 768 start 771 end 777 total 806 clock 60.0Hz
> 800x600 (0x43) 40.0MHz +HSync +VSync
> h: width 800 start 840 end 968 total 1056 skew 0 clock
> 37.9KHz
> v: height 600 start 601 end 605 total 628 clock 60.3Hz
> 800x600 (0x44) 36.0MHz +HSync +VSync
> h: width 800 start 824 end 896 total 1024 skew 0 clock
> 35.2KHz
> v: height 600 start 601 end 603 total 625 clock 56.2Hz
> 640x480 (0x45) 25.2MHz -HSync -VSync
> h: width 640 start 656 end 752 total 800 skew 0 clock
> 31.5KHz
> v: height 480 start 490 end 492 total 525 clock 59.9Hz
> HDMI-1 disconnected (normal left inverted right x axis y axis)
> Identifier: 0x3d
> Timestamp: -753984668
> Subpixel: unknown
> Clones: HDMI-2
> CRTCs: 0 1
> HDMI-2 disconnected (normal left inverted right x axis y axis)
> Identifier: 0x3e
> Timestamp: -753984668
> Subpixel: unknown
> Clones: HDMI-1
> CRTCs: 0 1
> TV disconnected (normal left inverted right x axis y axis)
> Identifier: 0x3f
> Timestamp: -753984668
> Subpixel: unknown
> Clones:
> CRTCs: 0 1
> BOTTOM: 37 (0x00000025) range: (0,100)
> RIGHT: 46 (0x0000002e) range: (0,100)
> TOP: 36 (0x00000024) range: (0,100)
> LEFT: 54 (0x00000036) range: (0,100)
> TV_FORMAT: NTSC-M
> supported: NTSC-M NTSC-443 NTSC-J PAL-M
> PAL-N PAL
> $
>
> $ uname -a
> OpenBSD FQDN 4.5 GENERIC.MP#78 i386
> $
>
> --
> http://www.openbsd.org/lyrics.html
