Hi, I have a ral(4) acting as a hostap. The problems began since ugrading from Feb 28th snapshot to April 10th (and higher). I have a Soekris 5501. I bought 2 different ral(4) PCI cards, one is a RT2661 and the other is a RT2860 (Planex GW-DS3300N). The RT2661 actually lasts longer than the RT2860. When I have the RT2860 in the box, it doesn't matter whether I use no encryption, WEP, WPA1 or WPA2. The box locks up without any kind of drop into ddb. When the RT2661 is in the machine, it will stay up a day, maybe two tops before it locks solid.
I have done quite a few updates since April 10th but I'm seriously considering just wiping and going to 4.5-release when it comes out in a few days in hopes that it will be more reliable. I originally went to -current for the ral(4) and vr(4) fixes. Obligatory dmesg with the RT2661 in follows. Any help would be appreciated! Regards, Tom OpenBSD 4.5-current (GENERIC) #102: Sat Apr 25 01:26:24 MDT 2009 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD" 586-class) 500 MHz cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX real mem = 536440832 (511MB) avail mem = 510394368 (486MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 20/80/26, BIOS32 rev. 0 @ 0xfac40 pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000 pcibios0: pcibios_get_intr_routing - function not supported pcibios0: PCI IRQ Routing information unavailable. pcibios0: PCI bus #0 is the last bus bios0: ROM list: 0xc8000/0xa800 cpu0 at mainbus0: (uniprocessor) amdmsr0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (bios) io address conflict 0x6100/0x100 io address conflict 0x6200/0x200 extent `pciio' (0x0 - 0xffff), flags=0 0x6000 - 0x7fff 0xe000 - 0xe00f 0xe100 - 0xe4ff extent `pcimem' (0x0 - 0xffffffff), flags=0 0x0 - 0x9ffff 0xf0000 - 0x1fffffff 0xa0000000 - 0xa00043ff 0xa0008000 - 0xa0011fff 0xfff00000 - 0xffffffff pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x33 glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES vr0 at pci0 dev 6 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11, address 00 :00:24:cb:a6:64 ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034 vr1 at pci0 dev 7 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 5, address 00: 00:24:cb:a6:65 ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034 vr2 at pci0 dev 8 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 9, address 00: 00:24:cb:a6:66 ukphy2 at vr2 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034 vr3 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 12, address 00 :00:24:cb:a6:67 ukphy3 at vr3 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034 ral0 at pci0 dev 14 function 0 "Ralink RT2661" rev 0x00: irq 10, address 00:14:8 5:d5:39:bb ral0: MAC/BBP RT2661D, RF RT2529 (MIMO XR) glxpcib0 at pci0 dev 20 function 0 "AMD CS5536 ISA" rev 0x03: rev 0, 32-bit 3579 545Hz timer, watchdog, gpio gpio0 at glxpcib0: 32 pins pciide0 at pci0 dev 20 function 2 "AMD CS5536 IDE" rev 0x01: DMA, channel 0 wire d to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 1: <WDC WD1200BEVS-00VAT0> wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors wd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 ignored (disabled) ohci0 at pci0 dev 21 function 0 "AMD CS5536 USB" rev 0x02: irq 15, version 1.0, legacy support ehci0 at pci0 dev 21 function 1 "AMD CS5536 USB" rev 0x02: irq 15 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "AMD EHCI root hub" rev 2.00/1.00 addr 1 isa0 at glxpcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: console com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 9: GPIO VLM TMS gpio1 at nsclpcsio0: 29 pins npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 usb1 at ohci0: USB revision 1.0 uhub1 at usb1 "AMD OHCI root hub" rev 1.00/1.00 addr 1 biomask e1c5 netmask ffe5 ttymask ffff mtrr: K6-family MTRR support (2 registers) softraid0 at root root on wd0a swap on wd0b dump on wd0b