Has anyone been successfull in implementing Howl.
If so please point me to any reference material that
will help. I currently am running OpenBSD 4.4 on
a Sony Vaio PCV-RS220(UC)
My current dmesg:
OpenBSD 4.4 (GENERIC) #1021: Tue Aug 12 17:16:55 MDT 2008
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.53GHz ("GenuineIntel" 686-class) 2.55 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem = 1064898560 (1015MB)
avail mem = 1021267968 (973MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 01/08/03, BIOS32 rev. 0 @ 0xf1040,
SMBIOS rev. 2.3 @ 0xf2fb0 (41 entries)
bios0: vendor Award Software, Inc. version "ACPI BIOS Revision 1001" date
01/08/2003
bios0: Sony Corporation PCV-RS220(UC)
apm0 at bios0: Power Management spec V1.2 (BIOS management disabled)
apm0: APM power management enable: unrecognized device ID (9)
apm0: APM engage (device 1): power management disabled (1)
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x1692
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf15e0/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xb200!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845G Host" rev 0x01
vga1 at pci0 dev 2 function 0 "Intel 82845G Video" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: aperture at 0xf0000000, size 0x8000000
drm at vga1 unsupported
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 5
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 3
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 9
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x81
pci1 at ppb0 bus 1
rl0 at pci1 dev 13 function 0 "Realtek 8139" rev 0x10: irq 9, address
00:0c:6e:27:2d:ad
rlphy0 at rl0 phy 0: RTL internal PHY
"NEC Firewire" rev 0x01 at pci1 dev 14 function 0 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x01: 24-bit timer
at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST3120023A>
wd0: 16-sector PIO, LBA, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-R5002, 1S33> ATAPI 5/cdrom
removable
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets, initiator 7
cd1 at scsibus1 targ 0 lun 0: <ASUS, CD-S400/A, 2.2N> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 10, ICH4
AC97
ac97: codec id 0x414c4720 (Avance Logic ALC650)
ac97: codec features 20 bit DAC, 18 bit ADC, Realtek 3D
audio0 at auich0
"Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask eb6d netmask eb6d ttymask fbff
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
auich0: measured ac97 link rate at 48003 Hz, will use 48000 Hz
uhub4 at uhub0 port 3 "Genesys Logic USB2.0 Hub" rev 2.00/7.02 addr 2
umass0 at uhub4 port 1 configuration 1 interface 0 "SanDisk ImageMate 14 in 1
Reader/Writer" rev 2.00/93.21 addr 3
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <Generic, STORAGE DEVICE, 9321> SCSI0 0/direct
removable
sd0: drive offline
sd1 at scsibus2 targ 1 lun 1: <Generic, STORAGE DEVICE, 9321> SCSI0 0/direct
removable
sd1: drive offline
sd2 at scsibus2 targ 1 lun 2: <Generic, STORAGE DEVICE, 9321> SCSI0 0/direct
removable
sd2: 968MB, 123 cyl, 255 head, 63 sec, 512 bytes/sec, 1984000 sec total
sd3 at scsibus2 targ 1 lun 3: <Generic, STORAGE DEVICE, 9321> SCSI0 0/direct
removable
sd3: drive offline
syncing disks...
OpenBSD 4.4 (GENERIC) #1021: Tue Aug 12 17:16:55 MDT 2008
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.53GHz ("GenuineIntel" 686-class) 2.55 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem = 1064898560 (1015MB)
avail mem = 1021267968 (973MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 01/08/03, BIOS32 rev. 0 @ 0xf1040,
SMBIOS rev. 2.3 @ 0xf2fb0 (41 entries)
bios0: vendor Award Software, Inc. version "ACPI BIOS Revision 1001" date
01/08/2003
bios0: Sony Corporation PCV-RS220(UC)
apm0 at bios0: Power Management spec V1.2 (BIOS management disabled)
apm0: APM power management enable: unrecognized device ID (9)
apm0: APM engage (device 1): power management disabled (1)
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x1692
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf15e0/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xb200!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845G Host" rev 0x01
vga1 at pci0 dev 2 function 0 "Intel 82845G Video" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: aperture at 0xf0000000, size 0x8000000
drm at vga1 unsupported
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 5
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 3
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 9
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x81
pci1 at ppb0 bus 1
rl0 at pci1 dev 13 function 0 "Realtek 8139" rev 0x10: irq 9, address
00:0c:6e:27:2d:ad
rlphy0 at rl0 phy 0: RTL internal PHY
"NEC Firewire" rev 0x01 at pci1 dev 14 function 0 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x01: 24-bit timer
at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST3120023A>
wd0: 16-sector PIO, LBA, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-R5002, 1S33> ATAPI 5/cdrom
removable
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets, initiator 7
cd1 at scsibus1 targ 0 lun 0: <ASUS, CD-S400/A, 2.2N> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 10, ICH4
AC97
ac97: codec id 0x414c4720 (Avance Logic ALC650)
ac97: codec features 20 bit DAC, 18 bit ADC, Realtek 3D
audio0 at auich0
"Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask eb6d netmask eb6d ttymask fbff
mtrr: Pentium Pro MTRR support
