For some reason, I can play audio through the speakers, but not
through my headphones. If my headphones are plugged in, no sound comes
out the speakers (but I think this is handled at the hardware level),
which is the proper behaviour.
I've tried unmuting everything with mixerctl (although nothing was
muted by default), to no avail. I've got the sound up all the way on
my headphones, but nothing comes out.
Here's my dmesg and mixerctl:
outputs.dig-dac_source=
inputs.dac2=126,126
inputs.dac=204,204
inputs.hp_source=sel6,sel5
inputs.spkr_source=dac,sel5
record.adc_source=mic
record.adc_mute=off
record.adc=124,124
record.adc2_source=mic
record.adc2_mute=off
record.adc2=124,124
inputs.sel3_source=dac2
inputs.sel4_source=dac2
inputs.beep_mute=off
inputs.beep=119
outputs.hp_mute=off
outputs.hp_boost=off
outputs.spkr_mute=off
outputs.spkr_boost=off
outputs.spkr_eapd=on
inputs.mic=0,0
outputs.mic_dir=input-vr80
inputs.mic2=85,85
outputs.mic2_dir=input-vr80
outputs.SPDIF_source=dig-dac
outputs.SPDIF_mute=off
outputs.SPDIF=126,126
outputs.mic3_mute=off
outputs.mic3_dir=input-vr80
outputs.vendor_source=hp
inputs.mix4_source=sel3,sel5
inputs.mix6_source=mic,mic2
inputs.mix6_mic=120,120
inputs.mix6_mic2=120,120
inputs.sel5_source=mix6
outputs.sel5_mute=off
outputs.sel5=120,120
inputs.sel6_source=dac2
inputs.sel7_source=dac2
inputs.mic3_source=sel7,sel5
inputs.mic3=85,85
outputs.vendor2_source=mic
outputs.hp_sense=plugged
outputs.mic_sense=plugged
outputs.mic3_sense=unplugged
outputs.spkr_muters=mic,mic3
outputs.master=204,204
outputs.master.mute=off
outputs.master.slaves=dac,spkr
record.volume=124,124
record.volume.mute=off
record.volume.slaves=adc,adc2
inputs.usingdac=0403
OpenBSD 4.5 (GENERIC) #2052: Sat Feb 28 14:55:24 MST 2009
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 2111504384 (2013MB)
avail mem = 2038304768 (1943MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (73 entries)
bios0: vendor LENOVO version "7LETC4WW (2.24 )" date 08/15/2008
bios0: LENOVO 6459CTO
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET SLIC BOOT ASF!
SSDT SSDT SSDT SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) LURT(S3) DURT(S3) IGBE(S4)
EXP0(S4) EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3)
USB1(S3) USB2(S3) USB3(S3) USB4(S3) EHC0(S3) EHC1(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz, 2494.21 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG
cpu0: 6MB 64b/line 16-way L2 cache
cpu0: apic clock running at 199MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0 apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus 4 (EXP2)
acpiprt5 at acpi0: bus 5 (EXP3)
acpiprt6 at acpi0: bus 13 (EXP4)
acpiprt7 at acpi0: bus 21 (PCI1)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2
acpitz0 at acpi0: critical temperature 127 degC
acpitz1 at acpi0: critical temperature 100 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "42T4621" serial 1186 type LION oem "SANYO"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
acpidock at acpi0 not configured
acpivideo at acpi0 not configured
acpivideo at acpi0 not configured
cpu0: unknown Enhanced SpeedStep CPU, msr 0x06174d2806004d28
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 15400 MHz (1340 mV): speeds: 15400, 1200 MHz
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x0c
ppb0 at pci0 dev 1 function 0 "Intel GM965 PCIE" rev 0x0c: apic 1 int
16 (irq 10)
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x0429 rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em0 at pci0 dev 25 function 0 "Intel ICH8 IGP M AMT" rev 0x03: apic 1
int 20 (irq 11), address 00:1f:e2:1c:0f:4e
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: apic 1
int 20 (irq 11)
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: apic 1
int 21 (irq 11)
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: apic 1
int 22 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03:
apic 1 int 17 (irq 11)
azalia0: RIRB time out
azalia0: codecs: Analog Devices AD1984, Conexant/0x2bfa, using Analog
Devices AD1984
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03: apic 1
int 20 (irq 11)
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x03: apic 1
int 21 (irq 11)
pci3 at ppb2 bus 3
iwn0 at pci3 dev 0 function 0 "Intel Wireless WiFi Link 4965AGN" rev
0x61: apic 1 int 17 (irq 11), MIMO 2T3R, MoW1, address
00:21:5c:9a:10:51
ppb3 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x03: apic 1
int 22 (irq 11)
pci4 at ppb3 bus 4
ppb4 at pci0 dev 28 function 3 "Intel 82801H PCIE" rev 0x03: apic 1
int 23 (irq 11)
pci5 at ppb4 bus 5
ppb5 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x03: apic 1
int 20 (irq 11)
pci6 at ppb5 bus 13
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 1
int 16 (irq 10)
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 1
int 17 (irq 11)
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: apic 1
int 18 (irq 11)
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 1
int 19 (irq 11)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb6 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3
pci7 at ppb6 bus 21
cbb0 at pci7 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1
int 16 (irq 10)
"Ricoh 5C832 Firewire" rev 0x04 at pci7 dev 0 function 1 not configured
sdhc0 at pci7 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 1
int 18 (irq 11)
sdmmc0 at sdhc0
"Ricoh 5C843 MMC" rev 0x11 at pci7 dev 0 function 3 not configured
"Ricoh 5C592 Memory Stick" rev 0x11 at pci7 dev 0 function 4 not configured
"Ricoh 5C852 xD" rev 0x11 at pci7 dev 0 function 5 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 22 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801HEM LPC" rev 0x03
pciide0 at pci0 dev 31 function 2 "Intel 82801HBM SATA" rev 0x03: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHZ2250BH G1>
wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-862, RB01> ATAPI
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: apic
1 int 23 (irq 11)
iic0 at ichiic0
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
mtrr: Pentium Pro MTRR support
ugen0 at uhub2 port 2 "STMicroelectronics Biometric Coprocessor" rev
1.00/0.01 addr 2
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
--
Samuel 'Shardz' Baldwin - staticfree.info/~samuel
