Hi all,
I updated my machine to snapshot 2009-05-15 and the machine freezes
when I start aucat :
mattieu:/home/mattieu:2$ /usr/bin/aucat -l
mattieu:/home/maschizo0: pci bus A error
The kernel doesn't panic, the machine just stay at this point.
This is the output from a serial console.
Here is the dmesg :
Sun Blade 1500, No Keyboard
Copyright 2005 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.17.1, 1024 MB memory installed, Serial #64511678.
Ethernet address 0:3:ba:d8:5e:be, Host ID: 83d85ebe.
Boot device: /p...@1e,600000/i...@d/d...@0,0:a File and args:
OpenBSD IEEE 1275 Bootblock 1.1
..>> OpenBSD BOOT 1.3
Trying bsd...
Booting /p...@1e,600000/i...@d/d...@0,0:a/bsd
5850...@0x1000000+6656@0x1594600+184...@0x1800000+4009912@0x182d048
symbols @ 0xfed2a2c0 81+364848+226641 start=0x1000000
[ using 592288 bytes of bsd ELF symbol table ]
console is /p...@1e,600000/i...@7/ser...@0,3f8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2009 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 4.5-current (GENERIC) #86: Fri May 15 14:44:23 MDT 2009
[email protected]:/usr/src/sys/arch/sparc64/compile/GENERIC
real mem = 1073741824 (1024MB)
avail mem = 1026850816 (979MB)
mainbus0 at root: Sun Blade 1500
cpu0 at mainbus0: SUNW,UltraSPARC-IIIi (rev 2.4) @ 1062 MHz
cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K
external (64 b/l)
"memory-controller" at mainbus0 not configured
schizo0 at mainbus0: "Tomatillo", version 4, ign 780, bus A 0 to 1
schizo0: dvma map c0000000-dfffffff
pci0 at schizo0
ebus0 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
"flashprom" at ebus0 addr 0-fffff not configured
rtc0 at ebus0 addr 70-71: m5823
pcfiic0 at ebus0 addr 320-321 ivec 0x2e
iic0 at pcfiic0
admtt0 at iic0 addr 0x2e
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM registered ECC PC2300CL2.5
spdmem1 at iic0 addr 0x51: 512MB DDR SDRAM registered ECC PC2300CL2.5
"ics951601" at iic0 addr 0x69 not configured
power0 at ebus0 addr 800-82f ivec 0x20
com0 at ebus0 addr 3f8-3ff ivec 0x2c: ns16550a, 16 byte fifo
com0: console
com1 at ebus0 addr 2e8-2ef ivec 0x2c: ns16550a, 16 byte fifo
"dma" at ebus0 addr 0-ffff not configured
alipm0 at pci0 dev 6 function 0 "Acer Labs M7101 Power" rev 0x00: 223KHz clock
iic1 at alipm0
"scm001" at alipm0 addr 0x20 skipped due to alipm0 bugs
autri0 at pci0 dev 8 function 0 "Acer Labs M5451 Audio" rev 0x02: ivec 0x7a4
ac97: codec id 0x41445348 (Analog Devices AD1881A)
ac97: codec features headphone, Analog Devices Phat Stereo
audio0 at autri0
midi0 at autri0: <4DWAVE MIDI UART>
ohci0 at pci0 dev 10 function 0 "Acer Labs M5237 USB" rev 0x03: ivec
0x7a7, version 1.0, legacy support
ohci1 at pci0 dev 11 function 0 "Acer Labs M5237 USB" rev 0x03: ivec
0x7a6, version 1.0, legacy support
pciide0 at pci0 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc4:
DMA, channel 0 configured to native-PCI, channel 1 configured to
native-PCI
pciide0: using ivec 0x798 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <IC35L060AVER07-0>
wd0: 16-sector PIO, LBA, 58644MB, 120103200 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <PHILIPS, DVDR1628P1, Q1.1> ATAPI
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ppb0 at pci0 dev 2 function 0 "TI PCI2250 PCI-PCI" rev 0x02
pci1 at ppb0 bus 1
ohci2 at pci1 dev 8 function 0 "NEC USB" rev 0x43: ivec 0x790, version 1.0
ohci3 at pci1 dev 8 function 1 "NEC USB" rev 0x43: ivec 0x791, version 1.0
ehci0 at pci1 dev 8 function 2 "NEC USB" rev 0x04: ivec 0x792
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1
"TI TSB43AB23 FireWire" rev 0x00 at pci1 dev 11 function 0 not configured
usb1 at ohci2: USB revision 1.0
uhub1 at usb1 "NEC OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci3: USB revision 1.0
uhub2 at usb2 "NEC OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci1: USB revision 1.0
uhub4 at usb4 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
"ppm" at mainbus0 not configured
schizo1 at mainbus0: "Tomatillo", version 4, ign 7c0, bus B 0 to 0
schizo1: dvma map c0000000-dfffffff
pci2 at schizo1
bge0 at pci2 dev 2 function 0 "Broadcom BCM5703" rev 0x00, BCM5703 A2
(0x1002): ivec 0x7dc, address 00:03:ba:d8:5e:be
brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
ifb0 at pci2 dev 3 function 0 "3D Labs Wildcat 5110" rev 0x01
ifb0: XVR-1200 (SUNW,375-3101), 1280x1024
wsdisplay0 at ifb0 mux 1
wsdisplay0: screen 0 added (std, sun emulation)
ifb1 at pci2 dev 3 function 1 "3D Labs Wildcat 5110" rev 0x01
ifb1: secondary output not supported yet
"i2c" at mainbus0 not configured
uhidev0 at uhub4 port 2 configuration 1 interface 0 "Dell Dell Premium
USB Optical Mouse" rev 2.00/0.09 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 5 buttons, Z dir
wsmouse0 at ums0 mux 0
softraid0 at root
bootpath: /p...@1e,600000/i...@d,0/d...@0,0
root on wd0a swap on wd0b dump on wd0b
--
Mattieu Baptiste
"/earth is 102% full ... please delete anyone you can."
