Stuart Henderson <stu <at> spacehopper.org> writes:
> Are you trying to boot an amd64 kernel? If so, you need qemu-system-x86_64.
Chances are, that I did. Downloaded the i386-cd45.iso, and followed the
'tap mode' path:
ifconfig tun0 link0
ifconfig bridge0 create
brconfig bridge0 add tun0 add bge0 up
All went through, and I have now:
tun0: flags=9903<UP,BROADCAST,PROMISC,SIMPLEX,LINK0,MULTICAST> mtu 1500
lladdr 00:bd:f5:ab:6c:01
priority: 0
groups: tun
inet6 fe80::2bd:f5ff:feab:6c01%tun0 prefixlen 64 scopeid 0x7
bridge0: flags=41<UP,RUNNING> mtu 1500
priority: 0
groups: bridge
Next, going back to Quick Start, I type
qemu -m 32 -monitor stdio -no-fd-bootchk -hda virtual.img \
-cdrom cd45.iso -boot d
which actually, does boot! and gets me into the installer, all hunky dory. Only
when downloading of the packages is supposed to start, once I have entered
IP-address and confirmed the directory, everything segfaults. Always.
I guess something networking-wise is still not okay. Can someone help me to
point out the mistake here?
Uwe
