Thanks. It seems tho' that I might be trying to revert even further... right now I've frozen up twice using the May 31 snapshot and the "current" install45.iso died on upgrade...
Dhu On Wed, 3 Jun 2009 22:51:40 -0700 James Records <james.reco...@gmail.com> wrote: > the new "match" keyword is what your looking for: > > http://www.openbsd.org/faq/current.html#20090406 > > J > > On Wed, Jun 3, 2009 at 10:36 PM, Duncan Patton a Campbell < > campb...@neotext.ca> wrote: > > > Howdy List? > > > > I just upgraded to the snapshot-1 because the current, June 3, goes into > > an error on encountering a scsi raid. So I dropped back to the May 31 > > and now pf doesn't like the scrub syntax.. > > > > pfctl -f pf.conf > > pf.conf:63: syntax error > > pfctl: Syntax error in config file: pf rules not loaded > > > > on > > > > scrub in all > > or > > scrub in on ext_if_vr0 all > > > > as line 63. If commented out, everything seems (so far) to work as before. > > > > Following is the dmesg for this machine. > > > > Thanks, > > > > Dhu > > > > > > OpenBSD 4.5-current (GENERIC.MP) #18: Sun May 31 10:35:36 MDT 2009 > > dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP > > cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3.04 GHz > > cpu0: > > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,CNXT-ID,CX16,xTPR > > real mem = 2146988032 (2047MB) > > avail mem = 2067677184 (1971MB) > > mainbus0 at root > > bios0 at mainbus0: AT/286+ BIOS, date 01/04/06, BIOS32 rev. 0 @ 0xfb180, > > SMBIOS rev. 2.3 @ 0xf0100 (39 entries) > > bios0: vendor Award Software International, Inc. version "F10" date > > 01/04/2006 > > bios0: Gigabyte Technology Co., Ltd. 8I945P-G > > acpi0 at bios0: rev 0 > > acpi0: tables DSDT FACP MCFG APIC > > acpi0: wakeup devices PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(S5) PEX5(S5) > > HUB0(S5) USB0(S1) USB1(S1) USB2(S1) USB3(S1) USBE(S1) AC97(S5) MC97(S5) > > AZAL(S5) PCI0(S5) > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: apic clock running at 200MHz > > cpu1 at mainbus0: apid 1 (application processor) > > cpu1: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3.02 GHz > > cpu1: > > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,CNXT-ID,CX16,xTPR > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > > ioapic0: misconfigured as apic 0, remapped to apid 2 > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus 1 (PEX0) > > acpiprt2 at acpi0: bus -1 (PEX1) > > acpiprt3 at acpi0: bus 3 (PEX2) > > acpiprt4 at acpi0: bus -1 (PEX3) > > acpiprt5 at acpi0: bus -1 (PEX4) > > acpiprt6 at acpi0: bus -1 (PEX5) > > acpiprt7 at acpi0: bus 4 (HUB0) > > acpicpu0 at acpi0 > > acpicpu1 at acpi0 > > acpibtn0 at acpi0: PWRB > > bios0: ROM list: 0xc0000/0xd000 0xd0000/0x5800 > > cpu0: Enhanced SpeedStep disabled by BIOS > > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > > pchb0 at pci0 dev 0 function 0 "Intel 82945G Host" rev 0x81 > > azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: apic 2 > > int 16 (irq 7) > > azalia0: RIRB time out > > azalia0: codecs: Realtek ALC882 > > audio0 at azalia0 > > ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 2 int 16 > > (irq 7) > > pci1 at ppb0 bus 1 > > ppb1 at pci1 dev 0 function 0 vendor "PLX", unknown product 0x8111 rev 0x21 > > pci2 at ppb1 bus 2 > > ohci0 at pci2 dev 0 function 0 "NEC USB" rev 0x43: apic 2 int 16 (irq 7), > > version 1.0 > > ohci1 at pci2 dev 0 function 1 "NEC USB" rev 0x43: apic 2 int 17 (irq 4), > > version 1.0 > > ehci0 at pci2 dev 0 function 2 "NEC USB" rev 0x04: apic 2 int 18 (irq 5) > > usb0 at ehci0: USB revision 2.0 > > uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1 > > usb1 at ohci0: USB revision 1.0 > > uhub1 at usb1 "NEC OHCI root hub" rev 1.00/1.00 addr 1 > > usb2 at ohci1: USB revision 1.0 > > uhub2 at usb2 "NEC OHCI root hub" rev 1.00/1.00 addr 1 > > ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: apic 2 int 18 > > (irq 5) > > pci3 at ppb2 bus 3 > > bge0 at pci3 dev 0 function 0 "Broadcom BCM5789" rev 0x11, BCM5750 B1 > > (0x4101): apic 2 int 18 (irq 5), address 00:14:85:15:50:b5 > > brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 > > uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 23 > > (irq 3) > > uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 19 > > (irq 10) > > uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 18 > > (irq 5) > > uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int 16 > > (irq 7) > > ehci1 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 23 > > (irq 3) > > usb3 at ehci1: USB revision 2.0 > > uhub3 at usb3 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > > ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1 > > pci4 at ppb3 bus 4 > > ahc0 at pci4 dev 0 function 0 "Adaptec AHA-2940U2 U2" rev 0x00: apic 2 int > > 20 (irq 11) > > scsibus0 at ahc0: 16 targets, initiator 7 > > sd0 at scsibus0 targ 0 lun 0: <FUJITSU, MAN3184MP, 0108> SCSI3 0/direct > > fixed > > sd0: 17522MB, 512 bytes/sec, 35885448 sec total > > vr0 at pci4 dev 1 function 0 "VIA VT6105 RhineIII" rev 0x86: apic 2 int 19 > > (irq 10), address 00:15:e9:87:4a:38 > > ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 4: OUI > > 0x004063, model 0x0034 > > vga1 at pci4 dev 2 function 0 "ATI Radeon 9200 PRO" rev 0x01 > > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > > radeondrm0 at vga1: apic 2 int 18 (irq 5) > > drm0 at radeondrm0 > > "ATI Radeon 9200 PRO Sec" rev 0x01 at pci4 dev 2 function 1 not configured > > ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM > > disabled > > pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, > > channel 0 configured to compatibility, channel 1 configured to compatibility > > atapiscsi0 at pciide0 channel 0 drive 0 > > scsibus1 at atapiscsi0: 2 targets > > cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4160B, A306> ATAPI > > 5/cdrom removable > > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 > > pciide0: channel 1 disabled (no drives) > > pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, > > channel 0 configured to native-PCI, channel 1 configured to native-PCI > > pciide1: using apic 2 int 19 (irq 10) for native-PCI interrupt > > wd0 at pciide1 channel 0 drive 0: <ST3500320AS> > > wd0: 16-sector PIO, LBA48, 476938MB, 976771055 sectors > > wd1 at pciide1 channel 0 drive 1: <ST3500320AS> > > wd1: 16-sector PIO, LBA48, 476940MB, 976773168 sectors > > wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 > > wd1(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5 > > wd2 at pciide1 channel 1 drive 1: <ST3500320AS> > > wd2: 16-sector PIO, LBA48, 476940MB, 976773168 sectors > > wd2(pciide1:1:1): using PIO mode 4, Ultra-DMA mode 5 > > ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 2 > > int 19 (irq 10) > > iic0 at ichiic0 > > spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-4200CL5 > > spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-4200CL5 > > usb4 at uhci0: USB revision 1.0 > > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb5 at uhci1: USB revision 1.0 > > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb6 at uhci2: USB revision 1.0 > > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb7 at uhci3: USB revision 1.0 > > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > isa0 at ichpcib0 > > isadma0 at isa0 > > pckbc0 at isa0 port 0x60/5 > > pckbd0 at pckbc0 (kbd slot) > > pckbc0: using irq 1 for kbd slot > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > pmsi0 at pckbc0 (aux slot) > > pckbc0: using irq 12 for aux slot > > wsmouse0 at pmsi0 mux 0 > > pcppi0 at isa0 port 0x61 > > midi0 at pcppi0: <PC speaker> > > spkr0 at pcppi0 > > it0 at isa0 port 0x2e/2: IT8712F rev 7, EC port 0x290 > > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > > mtrr: Pentium Pro MTRR support > > axe0 at uhub0 port 3 configuration 1 interface 0 "Cisco-Linksys USB200M v2" > > rev 2.00/0.01 addr 2 > > axe0: AX88772, address 00:1d:7e:00:21:e4 > > ukphy1 at axe0 phy 16: Generic IEEE 802.3u media interface, rev. 1: OUI > > 0x000ec6, model 0x0001 > > ulpt0 at uhub6 port 1 configuration 1 interface 0 "Brother Industries > > product 0x0183" rev 1.00/1.00 addr 2 > > ulpt0: using bi-directional mode > > softraid0 at root > > ahc0: target 0 using 16bit transfers > > ahc0: target 0 synchronous at 20.0MHz, offset = 0x7f > > scsibus2 at softraid0: 1 targets > > sd1 at scsibus2 targ 0 lun 0: <OPENBSD, SR RAID 1, 003> SCSI2 0/direct > > fixed > > sd1: 476937MB, 512 bytes/sec, 976767923 sec total > > root on sd0a swap on sd0b dump on sd0b
