Trying to upgrade to latest i386 snap (dated 6/4/09) on an IBM Thinkpad T42 produces the following panic:
----- ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81 pci2 at ppb1 bus 2 mem address conflict 0xb0000000/0x1000 mem address conflict 0xb1000000/0x1000 cbb0 at pci2 dev 0 function 0 "TI PCI4520 CardBus" rev 0x01: irq 11 cbb1 at pci2 dev 0 function 1 "TI PCI4520 CardBus" rev 0x01: irq 11 em0 at pci2 dev 1 function 0 "Intel Pro/1000MT (82540EP)" rev 0x03: irq 11, address 00:01:6c:ea:03:f8 iwi0 at pci2 dev 2 function 0 "Intel PRO/Wireless 2915ABG" rev 0x05: irq11iwi0: could not load cmd ring DMA map uvm_fault(0xd072b960, 0xd23d8000, 0, 1) -> e fatal page fault (6) in supervisor mode trap type 6 code 0 eip d03fa3bc cs 8 eflags 10046 cr2 d23d8f84 cpl 0 panic: trap type 6, code=0, pc=d03fa3bc The operating system has halted. Please press any key to reboot. ----- The machine is currently running the May 18 snap with iwi firmware 3.1 installed. Has anyone else run into this? -- Joe Gidi j...@entropicblur.com
