Hello,
I recently bought new computer (Phenon II X3 720, GA-MA790FXT-UD5P, 4GB
RAM 400GB SATA) and I was decided to install 64 bit (amd64) OpenBSD
4.5 on it. Installation went well and I was setup OpenBSD to use bsd.mp
kernel.
However OpenBSD recognize just 3.3 GB of 4GB RAM and overall system
response seems very slow (compiling, untar, gunzip...).
I try to speed up OpenBSD with Soft Updates and now it is a little bit
faster then before but again it is very slow for my hardware capacity.
How can I speed up OpenBSD? Can anybody give me some hint what to do or
give me a keywords for further research?
Below you can find my outputs from atactl, sysctl, dmesg and fstab
Thanks,
Nebojsa
#######################################################################
atactl wd1
#######################################################################
Model: WDC WD4000ABYS-01TNA0, Rev: 12.01C01, Serial #: WD-WCAPW2516335
Device type: ATA, fixed
Cylinders: 16383, heads: 16, sec/track: 63, total sectors: 781422768
Device capabilities:
ATA standby timer values
IORDY operation
IORDY disabling
Device supports the following standards:
ATA-1 ATA-2 ATA-3 ATA-4 ATA-5 ATA-6 ATA-7
Master password revision code 0xfffe
Device supports the following command sets:
NOP command
READ BUFFER command
WRITE BUFFER command
Host Protected Area feature set
Read look-ahead
Write cache
Power Management feature set
Security Mode feature set
SMART feature set
Flush Cache Ext command
Flush Cache command
Device Configuration Overlay feature set
48bit address feature set
Automatic Acoustic Management feature set
Set Max security extension commands
Set Features subcommand required
Power-up in standby feature set
DOWNLOAD MICROCODE command
SMART self-test
SMART error logging
Device has enabled the following command sets/features:
NOP command
READ BUFFER command
WRITE BUFFER command
Host Protected Area feature set
Read look-ahead
Write cache
Power Management feature set
SMART feature set
Flush Cache Ext command
Flush Cache command
Device Configuration Overlay feature set
48bit address feature set
Automatic Acoustic Management feature set
Set Features subcommand required
DOWNLOAD MICROCODE command
#######################################################################
Fstab
#######################################################################
/dev/wd1a / ffs rw,softdep 1 1
/dev/wd1h /home ffs rw,softdep,nodev,nosuid 1 2
/dev/wd1d /tmp ffs rw,softdep,nodev,nosuid 1 2
/dev/wd1g /usr ffs rw,softdep,nodev 1 2
/dev/wd1e /var ffs rw,softdep,nodev,nosuid 1 2
#######################################################################
sysctl hw
#######################################################################
hw.machine=amd64
hw.model=AMD Phenom(tm) II X3 720 Processor
hw.ncpu=3
hw.byteorder=1234
hw.pagesize=4096
hw.disknames=wd0,wd1,cd0
hw.diskcount=3
hw.sensors.km0.temp0=39.38 degC
hw.sensors.it0.temp0=38.00 degC
hw.sensors.it0.temp1=46.00 degC
hw.sensors.it0.temp2=47.00 degC
hw.sensors.it0.fan0=2986 RPM
hw.sensors.it0.fan1=0 RPM
hw.sensors.it0.fan2=0 RPM
hw.sensors.it0.fan3=0 RPM
hw.sensors.it0.fan4=0 RPM
hw.sensors.it0.volt0=1.31 VDC (VCORE_A)
hw.sensors.it0.volt1=1.60 VDC (VCORE_B)
hw.sensors.it0.volt2=3.33 VDC (+3.3V)
hw.sensors.it0.volt3=5.05 VDC (+5V)
hw.sensors.it0.volt4=12.42 VDC (+12V)
hw.sensors.it0.volt5=-4.06 VDC (-12V)
hw.sensors.it0.volt6=4.05 VDC (-5V)
hw.sensors.it0.volt7=3.63 VDC (+5VSB)
hw.sensors.it0.volt8=3.28 VDC (VBAT)
hw.cpuspeed=2812
hw.vendor=Gigabyte Technology Co., Ltd.
hw.product=GA-MA790FXT-UD5P
hw.uuid=30303234-3144-3135-3737-4245ffffffff
hw.physmem=3486384128
hw.usermem=3486240768
#######################################################################
dmesg
#######################################################################
OpenBSD 4.5 (GENERIC.MP) #2133: Sat Feb 28 15:02:16 MST 2009
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3486384128 (3324MB)
avail mem = 3370643456 (3214MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0100 (59 entries)
bios0: vendor Award Software International, Inc. version "F3L" date
04/07/2009
bios0: Gigabyte Technology Co., Ltd. GA-MA790FXT-UD5P
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP SSDT HPET MCFG TAMG APIC
acpi0: wakeup devices USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3)
USB5(S3) USB6(S3) SBAZ(S4) P2P_(S5) PCE2(S4) PCE3(S4) PCE4(S4) PCE5(S4)
PCE6(S4) PCE7(S4) PCE8(S4) PCE9(S4) PCEA(S4) PCEB(S4) PCEC(S4) PS2M(S5)
PS2K(S5) PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpihpet0 at acpi0: 14318180 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Phenom(tm) II X3 720 Processor, 2813.15 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36
,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,NXE,MMXX,FFXSR,LONG,
3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully
associative
cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully
associative
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Phenom(tm) II X3 720 Processor, 2812.83 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36
,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,NXE,MMXX,FFXSR,LONG,
3DNOW2,3DNOW
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully
associative
cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully
associative
cpu2 at mainbus0: apid 2 (application processor)
cpu2: AMD Phenom(tm) II X3 720 Processor, 2812.83 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36
,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,NXE,MMXX,FFXSR,LONG,
3DNOW2,3DNOW
cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu2: ITLB 32 4KB entries fully associative, 16 4MB entries fully
associative
cpu2: DTLB 48 4KB entries fully associative, 48 4MB entries fully
associative
ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 21, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (P2P_)
acpiprt2 at acpi0: bus 1 (PCE2)
acpiprt3 at acpi0: bus -1 (PCE3)
acpiprt4 at acpi0: bus -1 (PCE4)
acpiprt5 at acpi0: bus -1 (PCE5)
acpiprt6 at acpi0: bus -1 (PCE6)
acpiprt7 at acpi0: bus 2 (PCE7)
acpiprt8 at acpi0: bus -1 (PCE8)
acpiprt9 at acpi0: bus 3 (PCE9)
acpiprt10 at acpi0: bus 4 (PCEA)
acpiprt11 at acpi0: bus -1 (PCEB)
acpiprt12 at acpi0: bus -1 (PCEC)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpicpu2 at acpi0: PSS
acpibtn0 at acpi0: PWRB
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 vendor "ATI", unknown product 0x5956
rev0x00
ppb0 at pci0 dev 2 function 0 "ATI RD790 PCIE" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon HD 3450" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci1 dev 0 function 1 "ATI Radeon HD 34xx HD Audio" rev0x00:
apic 2 int 19 (irq 11)
azalia0: codecs: ATI/0xaa01
audio0 at azalia0
ppb1 at pci0 dev 7 function 0 vendor "ATI", unknown product 0x597d
rev 0x00
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D
(0x2800), apic 2 int 19 (irq 3), address 00:24:1d:15:77:be
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
ppb2 at pci0 dev 9 function 0 vendor "ATI", unknown product 0x597e
rev 0x00
pci3 at ppb2 bus 3
re1 at pci3 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D
(0x2800), apic 2 int 17 (irq 5), address 00:24:1d:15:77:df
rgephy1 at re1 phy 7: RTL8169S/8110S PHY, rev. 2
ppb3 at pci0 dev 10 function 0 vendor "ATI", unknown product 0x597f
rev 0x00
pci4 at ppb3 bus 4
jmb0 at pci4 dev 0 function 0 "JMicron JMB363 IDE/SATA" rev 0x02
ahci0 at jmb0: apic 2 int 18 (irq 11), AHCI 1.0
scsibus0 at ahci0: 32 targets
pciide0 at jmb0: DMA, channel 0 wired to native-PCI, channel 1 wired to
native-PCI
pciide0: using apic 2 int 18 (irq 11) for native-PCI interrupt
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: DMA
(unsupported), channel 0 configured to native-PCI, channel 1 configured
to native-PCI
pciide1: using apic 2 int 22 (irq 10) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD5001AALS-00L3B2>
wd0: 16-sector PIO, LBA48, 476938MB, 976771055 sectors
wd1 at pciide1 channel 1 drive 0: <WDC WD4000ABYS-01TNA0>
wd1: 16-sector PIO, LBA48, 381554MB, 781422768 sectors
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 16
(irq 11), version 1.0, legacy support
ohci1 at pci0 dev 18 function 1 "ATI SB700 USB" rev 0x00: apic 2 int 16
(irq 11), version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int17
(irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci2 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18
(irq 11), version 1.0, legacy support
ohci3 at pci0 dev 19 function 1 "ATI SB700 USB" rev 0x00: apic 2 int 18
(irq 11), version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int19
(irq 3)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x3a: SMI
iic0 at piixpm0
"eeprom" at iic0 addr 0x50 not configured
"eeprom" at iic0 addr 0x51 not configured
pciide2 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x00: DMA,channel
0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide2 channel 0 drive 1
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <Optiarc, DVD RW AD-5170A, 1.11> ATAPI
5/cdrom removable
cd0(pciide2:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4
azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 2
int 16 (irq 11)
azalia1: codecs: Realtek ALC885
audio1 at azalia1
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x00
ppb4 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
pci5 at ppb4 bus 5
"TI TSB43AB23 FireWire" rev 0x00 at pci5 dev 14 function 0
not configured
ohci4 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 2 int 18
(irq 11), version 1.0, legacy support
pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci2: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci3: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8720F rev 5, EC port 0x228
usb6 at ohci4: USB revision 1.0
uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
ugen0 at uhub4 port 3 "Philips SPC 315NC" rev 1.10/1.00 addr 2
uhidev0 at uhub2 port 1 configuration 1 interface 0 "Logitech USB-PS/2
Optical Mouse" rev 2.00/11.10 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
softraid0 at root
root on wd1a swap on wd1b dump on wd1b
