Hello all,
I have several new Dell R610's each with four Broadcom BCM5709's that
are not being configured in 4.5-release with the bge driver. I checked
the errata for 4.5 release, but didn't notice any patches that seemed
to address this.
Suggestions or advice appreciated. Dmesg follows:
OpenBSD 4.5 (GENERIC) #2052: Sat Feb 28 14:55:24 MST 2009
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 3478753280 (3317MB)
avail mem = 3363225600 (3207MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xcf79c000 (83 entries)
bios0: vendor Dell Inc. version "1.0.4" date 03/09/2009
bios0: Dell Inc. PowerEdge R610
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC SPCR HPET DM__ MCFG WD__ SLIC ERST HEST
BERT EINJ SRAT TCPA SSDT
acpi0: wakeup devices PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 16 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz, 1995.25 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 132MHz
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0 apid 0 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0 apid 1 pa 0xfec80000, version 20, 24 pins
ioapic1: misconfigured as apic 0, remapped to apid 1
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEX1)
acpiprt2 at acpi0: bus 2 (PEX3)
acpiprt3 at acpi0: bus -1 (PEX4)
acpiprt4 at acpi0: bus -1 (PEX5)
acpiprt5 at acpi0: bus -1 (PEX6)
acpiprt6 at acpi0: bus 4 (PEX7)
acpiprt7 at acpi0: bus 5 (PEX9)
acpiprt8 at acpi0: bus -1 (PEXA)
acpiprt9 at acpi0: bus 3 (SBEX)
acpiprt10 at acpi0: bus 6 (COMP)
acpicpu0 at acpi0: C3, C1, PSS
ipmi at mainbus0 not configured
cpu0: unknown i686 model 0x1a, can't get bus clockcpu0: EST: unknown
system bus clock
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x3403 rev 0x13
ppb0 at pci0 dev 1 function 0 "Intel X58 PCIE" rev 0x13
pci1 at ppb0 bus 1
"Broadcom BCM5709" rev 0x20 at pci1 dev 0 function 0 not configured
"Broadcom BCM5709" rev 0x20 at pci1 dev 0 function 1 not configured
ppb1 at pci0 dev 3 function 0 "Intel X58 PCIE" rev 0x13
pci2 at ppb1 bus 2
ppb2 at pci0 dev 7 function 0 "Intel X58 PCIE" rev 0x13: apic 1 int 21 (irq 0)
pci3 at ppb2 bus 4
ppb3 at pci0 dev 9 function 0 "Intel X58 PCIE" rev 0x13: apic 1 int 21 (irq 0)
pci4 at ppb3 bus 5
"Intel X58 Misc" rev 0x13 at pci0 dev 20 function 0 not configured
"Intel X58 GPIO" rev 0x13 at pci0 dev 20 function 1 not configured
"Intel X58 RAS" rev 0x13 at pci0 dev 20 function 2 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 0
int 17 (irq 14)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 0
int 18 (irq 11)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 0
int 19 (irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02
pci5 at ppb4 bus 3
mpi0 at pci5 dev 0 function 0 "Symbios Logic SAS1068E" rev 0x08: apic
0 int 16 (irq 15)
scsibus0 at mpi0: 112 targets
sd0 at scsibus0 targ 0 lun 0: <FUJITSU, MBB2147RC, D407> SCSI3 0/direct fixed
sd0: 140014MB, 512 bytes/sec, 286749480 sec total
sd1 at scsibus0 targ 1 lun 0: <FUJITSU, MBB2147RC, D407> SCSI3 0/direct fixed
sd1: 140014MB, 512 bytes/sec, 286749480 sec total
ses0 at scsibus0 targ 8 lun 0: <DP, BACKPLANE, 1.07> SCSI3
13/enclosure services fixed
uhci2 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 0
int 21 (irq 6)
uhci3 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 0
int 20 (irq 5)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 0
int 21 (irq 6)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci6 at ppb5 bus 6
vga1 at pci6 dev 3 function 0 vendor "Matrox", unknown product 0x0532 rev 0x0a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel 82801IB LPC" rev 0x02
pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 0 int 23 (irq 14) for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TEAC, DVD-ROM DV28SV, D.0J> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uhub6 at uhub0 port 3 "Standard Microsystems product 0x2514" rev
2.00/0.00 addr 2
uhidev0 at uhub4 port 1 configuration 1 interface 0 "Cypress
Semiconductor USB To keyboard Mouse Converter" rev 1.01/0.01 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub4 port 1 configuration 1 interface 1 "Cypress
Semiconductor USB To keyboard Mouse Converter" rev 1.01/0.01 addr 2
uhidev1: iclass 3/1, 2 report ids
ums0 at uhidev1 reportid 1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhidev2 at uhub4 port 2 configuration 1 interface 0 "Avocent USB
Composite Device-0" rev 1.10/0.00 addr 3
uhidev2: iclass 3/1
ukbd1 at uhidev2: 8 modifier keys, 6 key codes
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
uhidev3 at uhub4 port 2 configuration 1 interface 1 "Avocent USB
Composite Device-0" rev 1.10/0.00 addr 3
uhidev3: iclass 3/1
ums1 at uhidev3
ums1: X report 0x0002 not supported
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
uhub7 at uhub6 port 2 "Prolific Technology Inc. USB Embedded Hub" rev
2.00/1.00 addr 3
umass0 at uhub7 port 1 configuration 1 interface 0 "Prolific
Technology Inc. USB Mass Storage Device" rev 2.00/1.00 addr 4
umass0: using ATAPI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd2 at scsibus2 targ 1 lun 0: <Corsair, Flash Voyager, 1.00> ATAPI
0/direct removable
sd2: 3912MB, 512 bytes/sec, 8011776 sec total
--
"Invincibility is in oneself, vulnerability in the opponent." -- Sun Tzu
