Hello,
I ran "pcidump -vv" as instructed and it also rebooted the machine, but it
produced some output before that (which I have attached), and this output
stops in the "Chips and Technologies 65550" section, the last few lines of
the section are missing.
I went back to Xorg and ran it in gdb, and as far as I could tell the
reboot happens in the "pci_system_openbsd_create" function in the
libpciaccess library.
I hope this helps to narrow it down.
Thanks a lot again for your help.
======== pcidump --v ==================
Domain /dev/pci0:
0:0:0: Acer Labs M1523 PCI
0x0000: Vendor ID: 10b9 Product ID: 1521
0x0004: Command: 0006 Status ID: 2400
0x0008: Class: 06 Subclass: 00 Interface: 00 Revision: 1c
0x000c: BIST: 00 Header Type: 00 Latency Timer: 20 Cache Line
Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 10b9 Product ID: 1521
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0:2:0: Acer Labs M1523 ISA
0x0000: Vendor ID: 10b9 Product ID: 1523
0x0004: Command: 000f Status ID: 3200
0x0008: Class: 06 Subclass: 01 Interface: 00 Revision: 07
0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line
Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 10b9 Product ID: 1523
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0:2:1: Acer Labs M5219 UDMA IDE
0x0000: Vendor ID: 10b9 Product ID: 5219
0x0004: Command: 0005 Status ID: 0280
0x0008: Class: 01 Subclass: 01 Interface: fa Revision: 20
0x000c: BIST: 00 Header Type: 80 Latency Timer: 40 Cache Line
Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR io addr: 0x0000fcf0
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 0000 Product ID: 0000
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 02 Max Lat: 04
0:4:0: TI PCI1130 CardBus
0x0000: Vendor ID: 104c Product ID: ac12
0x0004: Command: 0007 Status ID: 0200
0x0008: Class: 06 Subclass: 07 Interface: 00 Revision: 04
0x000c: BIST: 00 Header Type: 82 Latency Timer: 40 Cache Line
Size: 04
0x0010: Cardbus Control Registers Base Address: 02800000
0x0018: Primary Bus: 0 Cardbus Bus: 1 Subordinate Bus: 5
Cardbus Latency Timer: 00
0x001c: Memory Base 0: 00000000
0x0020: Memory Limit 0: 00000000
0x0024: Memory Base 1: 00000000
0x0028: Memory Limit 1: 00000000
0x002c: I/O Base 0: 00000000
0x0030: I/O Limit 0: 00000000
0x0034: I/O Base 1: 00000000
0x0038: I/O Limit 1: 00000000
0x003c: Interrupt Pin: 01 Line: ff Bridge Control: 0340
0x0040: Subsystem Vendor ID: 0000 Product ID: 0000
0x0044: 16-bit Legacy Mode Base Address: 000003e1
0:4:1: TI PCI1130 CardBus
0x0000: Vendor ID: 104c Product ID: ac12
0x0004: Command: 0007 Status ID: 0200
0x0008: Class: 06 Subclass: 07 Interface: 00 Revision: 04
0x000c: BIST: 00 Header Type: 82 Latency Timer: 40 Cache Line
Size: 04
0x0010: Cardbus Control Registers Base Address: 02801000
0x0018: Primary Bus: 0 Cardbus Bus: 6 Subordinate Bus: 10
Cardbus Latency Timer: 00
0x001c: Memory Base 0: 00000000
0x0020: Memory Limit 0: 00000000
0x0024: Memory Base 1: 00000000
0x0028: Memory Limit 1: 00000000
0x002c: I/O Base 0: 00000000
0x0030: I/O Limit 0: 00000000
0x0034: I/O Base 1: 00000000
0x0038: I/O Limit 1: 00000000
0x003c: Interrupt Pin: 02 Line: ff Bridge Control: 0340
0x0040: Subsystem Vendor ID: 0000 Product ID: 0000
0x0044: 16-bit Legacy Mode Base Address: 000003e1
0:6:0: Chips and Technologies 65550
0x0000: Vendor ID: 102c Product ID: 00e0
0x0004: Command: 0083 Status ID: 0280
0x0008: Class: 03 Subclass: 00 Interface: 00 Revision: 05
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line
Size: 00
0x0010: BAR mem 32bit addr: 0xfd000000
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 0000 Product ID: 0000
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
================ Xorg -verbose 1000 ==========================
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: OpenBSD 4.5 i386
Current Operating System: OpenBSD tensa.lan 4.5 GENERIC#1749 i386
Build Date: 27 February 2009 05:01:11PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 15 21:43:49 2009
(++) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Not automatically adding devices
(==) Not automatically enabling devices
(==) Including the default font path
/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/OTF,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/75dpi/.
(**) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/,
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
(**) ModulePath set to "/usr/X11R6/lib/modules"
(II) Loader magic: 0x3c01e2e0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on openbsd
(--) Using wscons driver on /dev/ttyC1 in pcvt compatibility mode (version
3.32)
On Sun, 14 Jun 2009, Matthieu Herrb wrote:
On Sat, Jun 13, 2009 at 9:46 PM, <w...@xoono.net> wrote:
Hello,
I just installed version 4.5 on a very old laptop (Texas Instruments Extensa
605CD), it was happily running 4.2 before. All the hardware seems to be
recognised correctly on both versions but I am having a strange problem when
trying to configure Xorg, the command "X -configure" reboots the machine, in
fact, running X with any parameter reboots the machine. I created a
xorg.conf file to test and trying to start X with it produces the same
result.
I haven't used OpenBSD for very long, I only started with version 4.2 so I
am thinking that I am probably missing something simple or something new on
4.5? (I have the machdep.allowaperture=2 in sysctl.conf).
I am attaching my sysctl params and my dmesg, I hope someone can give me a
hand with this.
Thanks very much in advance.
Please also include pcidump -vv output
Can you look if you get something in /var/log/Xorg.0.log after the reboot?
if not, can you set up a serial console, log in as root through it and
run "script Xorg -verbose 4"
and send the typescript here ?
Also, try using the "Vesa" driver xorg.conf. It should work, as I
suspect the breakage is in the xf86-video-chips driver.
--
Matthieu Herrb
