I just installed the amd64 snapshot from 2009-08-05 on my Dell
Inspiron 1501 laptop, and since packages are a little behind I tried
to compile gimp from Ports. However, after about three hours of work
I started seeing messages from bce(4) saying "data error" while
downloading the distfiles. Although the download would eventually
finish alright, it was slow going. When I rebooted, everything worked
right again and I went back to building gimp, but after about another
three hours I got the same problem. I check pfctl and the stats in
the interface are not particularly impressive:
bce0
Cleared: Wed Dec 31 19:00:01 1969
References: [ States: 0 Rules: 1 ]
In4/Pass: [ Packets: 54320 Bytes: 75465588 ]
In4/Block: [ Packets: 0 Bytes: 0 ]
Out4/Pass: [ Packets: 35584 Bytes: 1885654 ]
Out4/Block: [ Packets: 0 Bytes: 0 ]
In6/Pass: [ Packets: 14 Bytes: 2018 ]
In6/Block: [ Packets: 0 Bytes: 0 ]
Out6/Pass: [ Packets: 1 Bytes: 64 ]
Out6/Block: [ Packets: 0 Bytes: 0 ]
I thought maybe it has to do with an amount of data being transferred,
so I rebooted and ran nc from another machine's /dev/zero to the
laptop's /dev/null, and transferred 5GB but this did not trigger the
error. Looking at the driver source I'm not good enough to see any
other possible things to check, so if anybody has any ideas of how I
can further debug this I'd be happy to try them. Before I installed
the snap I was running 4.5 release with no troubles but perhaps I'd
just never stressed it right. It seems that if_bce.c has not changed
since 4.5 was tagged.
Dmesg attached.
--
Taylor Venable
http://metasyntax.net/
OpenBSD 4.6-current (GENERIC.MP) #126: Wed Aug 5 15:46:03 MDT 2009
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2010578944 (1917MB)
avail mem = 1939279872 (1849MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0470 (37 entries)
bios0: vendor Dell Inc. version "2.3.0" date 03/15/2006
bios0: Dell Inc. Inspiron 1501
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP TCPA SSDT APIC MCFG HPET SLIC
acpi0: wakeup devices PB2_(S4) PB3_(S4) PB5_(S4) PB6_(S4) OHC1(S0) OHC2(S0)
OHC3(S0) OHC4(S0) OHC5(S0) EHCI(S0) P2P_(S5) MODM(S3) SLPB(S4) LID_(S3)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Turion(tm) 64 X2 Mobile Technology TL-50, 1596.25 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 256KB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Turion(tm) 64 X2 Mobile Technology TL-50, 1596.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 256KB 64b/line
16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 21, 24 pins
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PB2_)
acpiprt2 at acpi0: bus -1 (PB3_)
acpiprt3 at acpi0: bus 2 (PB5_)
acpiprt4 at acpi0: bus -1 (PB6_)
acpiprt5 at acpi0: bus 8 (P2P_)
acpiprt6 at acpi0: bus 1 (AGP_)
acpiec0 at acpi0
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpitz0 at acpi0: critical temperature 110 degC
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: LID_
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT1 model "DELLRD8507" serial 4165 type LION oem "SIMPLO"
acpivideo0 at acpi0: VGA_
acpivout0 at acpivideo0: CRT_
acpivout1 at acpivideo0: LCD_
cpu0: PowerNow! K8 1596 MHz: speeds: 1600 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "ATI RS480 Host" rev 0x10
ppb0 at pci0 dev 1 function 0 "ATI RS480 PCIE" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Radeon XPRESS 200M" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 5 function 0 "ATI RS480 PCIE" rev 0x00
pci2 at ppb1 bus 2
ahci0 at pci0 dev 18 function 0 "ATI SB600 SATA" rev 0x00: apic 2 int 22 (irq
11), AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD2500BEVS-0, 01.0> SCSI3 0/direct fixed
sd0: 238475MB, 512 bytes/sec, 488397168 sec total
ohci0 at pci0 dev 19 function 0 "ATI SB600 USB" rev 0x00: apic 2 int 16 (irq
10), version 1.0, legacy support
ohci1 at pci0 dev 19 function 1 "ATI SB600 USB" rev 0x00: apic 2 int 17 (irq
11), version 1.0, legacy support
ohci2 at pci0 dev 19 function 2 "ATI SB600 USB" rev 0x00: apic 2 int 18 (irq
11), version 1.0, legacy support
ohci3 at pci0 dev 19 function 3 "ATI SB600 USB" rev 0x00: apic 2 int 17 (irq
11), version 1.0, legacy support
ohci4 at pci0 dev 19 function 4 "ATI SB600 USB" rev 0x00: apic 2 int 18 (irq
11), version 1.0, legacy support
ehci0 at pci0 dev 19 function 5 "ATI SB600 USB2" rev 0x00: apic 2 int 19 (irq
11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x13: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-4200CL3 SO-DIMM
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-4200CL3 SO-DIMM
piixpm0: exec: op 1, addr 0x55, cmdlen 1, len 0, flags 0x08: timeout, status
0x9<BUSY,BUSERR>
pciide0 at pci0 dev 20 function 1 "ATI SB600 IDE" rev 0x00: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TSSTcorp, DVD+-RW TS-L632D, DE04> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
azalia0 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 2 int 16
(irq 10)
azalia0: codecs: Conexant/0x2bfa, Sigmatel STAC9200, using Sigmatel STAC9200
audio0 at azalia0
pcib0 at pci0 dev 20 function 3 "ATI SB600 ISA" rev 0x00
ppb2 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
pci3 at ppb2 bus 8
bce0 at pci3 dev 0 function 0 "Broadcom BCM4401B1" rev 0x02: apic 2 int 21 (irq
10), address 00:19:b9:6b:fc:89
bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
sdhc0 at pci3 dev 1 function 0 "Ricoh 5C822 SD/MMC" rev 0x19: apic 2 int 20
(irq 11)
sdmmc0 at sdhc0
"Ricoh 5C843 MMC" rev 0x01 at pci3 dev 1 function 1 not configured
pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00: core rev
BH-F2
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci3: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci4: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
scsibus2 at softraid0: 1 targets
sd1 at scsibus2 targ 0 lun 0: <OPENBSD, SR CRYPTO, 003> SCSI2 0/direct fixed
sd1: 168838MB, 512 bytes/sec, 345781154 sec total
