That was fixed in 4.6. Can you please verify that this works for you?
On Mon, Aug 17, 2009 at 12:21:06PM +0100, FRLinux wrote:
> Hello,
>
> I have installed OpenBSD 4.5 amd64 on an Intel based motherboard for a
> server (S3210SH) and it hangs when acpi is enabled. Booting with boot
> -c + "disable acpi" allowed it to boot. Here is the copy/paste of the
> boot with ACPI and without:
>
> * with ACPI *
>
> OpenBSD 4.5 (GENERIC) #2052: Sat Feb 28 14:55:24 MST 2009
> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
> real mem = 2143219712 (2043MB)
> avail mem = 2069237760 (1973MB)
> RTC BIOS diagnostic error f<fixed_disk,invalid_time>
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.5 @ 0x7fdfa000 (61 entries)
> bios0: vendor Intel Corporation version
> "S3200X38.86B.00.00.0042.042820081723" date 04/28/2008
> bios0: Intel Corporation S3210SH
> acpi0 at bios0: rev 2
> acpi0: tables DSDT SLIC FACP APIC WDDT MCFG HPET SPCR DMAR SSDT SSDT SSDT
> SSDT HEST BERT ERST EINJ
> acpi0: wakeup devices SLPB(S5) NPE1(S5) NPE6(S5) P32_(S5) PS2M(S1)
> PS2K(S1) ILAN(S5) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(S5) PEX5(S5)
> UHC1(S1) UHC2(S1) UHC3(S1) UHC4(S1) EHCI(S1) EHC2(S1) UH4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Xeon(R) CPU E3120 @ 3.16GHz, 3159.13 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,TM2,NXE,LONG
> cpu0: 6MB 64b/line 16-way L2 cache
> cpu0: apic clock running at 332MHz
> cpu at mainbus0: not configured
> ioapic0 at mainbus0 apid 5 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 0, remapped to apid 5
> acpihpet0 at acpi0: 14318179 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (NPE1)
> acpiprt2 at acpi0: bus -1 (NPE6)
> acpiprt3 at acpi0: bus 3 (P32_)
> acpiprt4 at acpi0: bus 1 (PEX0)
> acpiprt5 at acpi0: bus -1 (PEX1)
> acpiprt6 at acpi0: bus -1 (PEX2)
> acpiprt7 at acpi0: bus -1 (PEX3)
> acpiprt8 at acpi0: bus 2 (PEX4)
> acpiprt9 at acpi0: bus -1 (PEX5)
> acpicpu0 at acpi0 0xffff800000160d88 cnt:01 stk:00 nameref: CFGD
> Not Integer
> 06a2 Called: \_PR_.CPU0._PSS
> panic: aml_die aml_xeval:3311
> Stopped at Debugger+0x5: leave
> Debugger() at Debugger+0x5
> panic() at panic+0x122
> _aml_die() at _aml_die+0xdb
> aml_xeval() at aml_xeval+0x78
> aml_xparse() at aml_xparse+0x5e6
> aml_xparse() at aml_xparse+0x171c
> aml_xparse() at aml_xparse+0x171c
> aml_xparse() at aml_xparse+0x171c
> aml_xparse() at aml_xparse+0x171c
> aml_xeval() at aml_xeval+0xf7
> end trace frame: 0xffffffff80c958c0, count: 0
> RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
> DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
> ddb> trace
> Debugger() at Debugger+0x5
> panic() at panic+0x122
> _aml_die() at _aml_die+0xdb
> aml_xeval() at aml_xeval+0x78
> aml_xparse() at aml_xparse+0x5e6
> aml_xparse() at aml_xparse+0x171c
> aml_xparse() at aml_xparse+0x171c
> aml_xparse() at aml_xparse+0x171c
> aml_xparse() at aml_xparse+0x171c
> aml_xeval() at aml_xeval+0xf7
> aml_evalnode() at aml_evalnode+0x97
> acpicpu_getpss() at acpicpu_getpss+0x34
> acpicpu_attach() at acpicpu_attach+0x140
> config_attach() at config_attach+0x11b
> acpi_add_device() at acpi_add_device+0x6d
> aml_walknodes() at aml_walknodes+0x6e
> aml_walknodes() at aml_walknodes+0x41
> aml_walknodes() at aml_walknodes+0x41
> acpi_attach() at acpi_attach+0x49f
> config_attach() at config_attach+0x11b
> bios_attach() at bios_attach+0x146
> config_attach() at config_attach+0x11b
> mainbus_attach() at mainbus_attach+0x5a
> config_attach() at config_attach+0x11b
> cpu_configure() at cpu_configure+0x1c
> main() at main+0x3c5
> end trace frame: 0x0, count: -26
> ddb> ps
> PID PPID PGRP UID S FLAGS WAIT COMMAND
> * 0 -1 0 0 7 0x80200 swapper
>
>
>
>
> * without ACPI *
>
> UKC> disable acpi
> 315 acpi0 disabled
> UKC> boot
> Unknown command, try help
> UKC> exit
> Continuing...
> RTC BIOS diagnostic error f<fixed_disk,invalid_time>
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.5 @ 0x7fdfa000 (61 entries)
> bios0: vendor Intel Corporation version
> "S3200X38.86B.00.00.0042.042820081723" date 04/28/2008
> bios0: Intel Corporation S3210SH
> acpi at bios0 not configured
> mpbios0 at bios0: Intel MP Specification 1.4
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Xeon(R) CPU E3120 @ 3.16GHz, 3159.17 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,TM2,NXE,LONG
> cpu0: 6MB 64b/line 16-way L2 cache
> cpu0: apic clock running at 332MHz
> mpbios0: bus 0 is type PCI
> mpbios0: bus 1 is type PCI
> mpbios0: bus 2 is type PCI
> mpbios0: bus 3 is type PCI
> mpbios0: bus 4 is type ISA
> ioapic0 at mainbus0 apid 5 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 0, remapped to apid 5
> ipmi at mainbus0 not configured
> pci0 at mainbus0 bus 0: configuration mode 1
> pchb0 at pci0 dev 0 function 0 "Intel 3200/3210 Host" rev 0x00
> uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 5 int 18
> (irq 9)
> uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 5 int 21
> (irq 10)
> uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02: apic 5 int 17
> (irq 10)
> ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 5 int 17
> (irq 10)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02pci_intr_map:
> bus 0 dev 28 func 0 pin 1; line 11
> pci_intr_map: no MP mapping found
> : irq 11
> pci1 at ppb0 bus 1
> vendor "3ware", unknown product 0x1004 (class mass storage subclass RAID,
> rev 0x01) at pci1 dev 0 function 0 not configured
> ppb1 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02pci_intr_map:
> bus 0 dev 28 func 4 pin 1; line 11
> pci_intr_map: no MP mapping found
> : irq 11
> pci2 at ppb1 bus 2
> vga1 at pci2 dev 0 function 0 "Matrox MGA G200e (ServerEngines)" rev 0x02
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 5 int 23
> (irq 11)
> uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 5 int 19
> (irq 11)
> uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 5 int 18
> (irq 9)
> ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 5 int 23
> (irq 11)
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
> pci3 at ppb2 bus 3
> em0 at pci3 dev 2 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: apic 5
> int 18 (irq 9), address 00:15:17:9d:46:64
> pcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02
> pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA,
> channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide0: using apic 5 int 21 (irq 10) for native-PCI interrupt
> wd0 at pciide0 channel 0 drive 0: <ST3160813AS>
> wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CDDVDW TS-L633A, UO01> ATAPI
> 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
> ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 5
> int 18 (irq 9)
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5
> spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL5
> pciide1 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA,
> channel 0 wired to native-PCI, channel 1 wired to native-PCI
> pciide1: using apic 5 int 21 (irq 10) for native-PCI interrupt
> usb2 at uhci0: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci1: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci2: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb5 at uhci3: USB revision 1.0
> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb6 at uhci4: USB revision 1.0
> uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb7 at uhci5: USB revision 1.0
> uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com0: console
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> mtrr: Pentium Pro MTRR support
> softraid0 at root
> root on wd0a swap on wd0b dump on wd0b
> Automatic boot in progress: starting file system checks.
> /dev/rwd0a: file system is clean; not checking
> setting tty flags
> starting network
> starting system logger
> starting initial daemons:.
> savecore: no core dump
> checking quotas: done.
> building ps databases: kvm dev.
> clearing /tmp
> starting pre-securelevel daemons:.
> setting kernel security level: kern.securelevel: 0 -> 1
> creating runtime link editor directory cache.
> preserving editor files.
> ssh-keygen: generating new DSA host key... done.
> ssh-keygen: generating new RSA host key... done.
> ssh-keygen: generating new RSA1 host key... done.
> openssl: generating new isakmpd RSA key... done.
> starting network daemons: sendmail inetd sshd.
> starting local daemons:.
> standard daemons: cron.
> Mon Aug 17 12:09:40 IST 2009
>
> OpenBSD/amd64 (haagenti) (tty00)
>
> Let me know if there is more info I can provide.
>
> Cheers,
> Steph
