Well, can you reproduce it if you run the rsnapshot manually? If you go back to a kernel from 6 days ago does it work?
On Wed, Aug 19, 2009 at 09:08:14AM +0200, Antoine Jacoutot wrote: > No one, really? > > > On Tue, 18 Aug 2009, Antoine Jacoutot wrote: > > > Hi. > > > > For five days in a row now I've been having the same issue. 2 days ago I > > upgraded to a never snapshot in case it would fix my problem without > > luck. > > > > This is @home on a DSL lines. OpenBSD gateway is connected to the modem > > with an axe(4), default setup, nothing fancy running... > > Every night I'm doing an rsnapshot backup off site of a small amount of > > data (couple of Gb). This setup has been running for about a year. > > > > Since 5 days, the connexion hangs during that backup, everytime. > > My logs are empty and the only way to get net access again is to: > > # pfctl -d ; sleep 2 ; pfctl -e > > > > pyr@ and I couldn't find anything obviously wrong. I'm not sure where I > > should start to debug this and would appreciate any hint. > > > > Thanks. > > > > > > INFO: > > Status: Enabled for 1 days 00:38:41 Debug: Urgent > > > > State Table Total Rate > > current entries 77 > > searches 9982542 112.5/s > > inserts 179453 2.0/s > > removals 179376 2.0/s > > Counters > > match 180540 2.0/s > > bad-offset 0 0.0/s > > fragment 0 0.0/s > > short 0 0.0/s > > normalize 0 0.0/s > > memory 0 0.0/s > > bad-timestamp 0 0.0/s > > congestion 0 0.0/s > > ip-option 0 0.0/s > > proto-cksum 0 0.0/s > > state-mismatch 72 0.0/s > > state-insert 1 0.0/s > > state-limit 0 0.0/s > > src-limit 10 0.0/s > > synproxy 0 0.0/s > > > > TIMEOUTS: > > tcp.first 120s > > tcp.opening 30s > > tcp.established 86400s > > tcp.closing 900s > > tcp.finwait 45s > > tcp.closed 90s > > tcp.tsdiff 30s > > udp.first 60s > > udp.single 30s > > udp.multiple 60s > > icmp.first 20s > > icmp.error 10s > > other.first 60s > > other.single 30s > > other.multiple 60s > > frag 30s > > interval 10s > > adaptive.start 6000 states > > adaptive.end 12000 states > > src.track 0s > > > > LIMITS: > > states hard limit 10000 > > src-nodes hard limit 10000 > > frags hard limit 5000 > > tables hard limit 1000 > > table-entries hard limit 200000 > > > > > > OpenBSD 4.6-current (GENERIC) #105: Mon Aug 10 18:02:36 MDT 2009 > > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC > > cpu0: VIA Esther processor 1000MHz ("CentaurHauls" 686-class) 1 GHz > > cpu0: > > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,SSE3,EST,TM2 > > real mem = 469254144 (447MB) > > avail mem = 445857792 (425MB) > > mainbus0 at root > > bios0 at mainbus0: AT/286+ BIOS, date 06/16/06, BIOS32 rev. 0 @ 0xfa960, > > SMBIOS rev. 2.3 @ 0xf0800 (26 entries) > > bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 06/16/2006 > > apm0 at bios0: Power Management spec V1.2 (slowidle) > > apm0: AC on, battery charge unknown > > acpi at bios0 function 0x0 not configured > > pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdd14 > > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdc60/176 (9 entries) > > pcibios0: bad IRQ table checksum > > pcibios0: PCI BIOS has 9 Interrupt Routing table entries > > pcibios0: PCI Exclusive IRQs: 5 10 11 > > pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8237 ISA" rev 0x00) > > pcibios0: PCI bus #1 is the last bus > > bios0: ROM list: 0xc0000/0xf200 0xd0000/0x8000! 0xd8000/0x4400! > > cpu0 at mainbus0: (uniprocessor) > > cpu0: RNG AES AES-CTR SHA1 SHA256 RSA > > cpu0: unknown Enhanced SpeedStep CPU, msr 0x08100a1308000a13 > > cpu0: using only highest and lowest power states > > cpu0: Enhanced SpeedStep 998 MHz: speeds: 1000, 800 MHz > > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > > pchb0 at pci0 dev 0 function 0 "VIA CN700 Host" rev 0x00 > > viaagp0 at pchb0: v3 > > agp0 at viaagp0: aperture at 0xe8000000, size 0x10000000 > > pchb1 at pci0 dev 0 function 1 "VIA CN700 Host" rev 0x00 > > pchb2 at pci0 dev 0 function 2 "VIA CN700 Host" rev 0x00 > > pchb3 at pci0 dev 0 function 3 "VIA PT890 Host" rev 0x00 > > pchb4 at pci0 dev 0 function 4 "VIA CN700 Host" rev 0x00 > > pchb5 at pci0 dev 0 function 7 "VIA CN700 Host" rev 0x00 > > ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00 > > pci1 at ppb0 bus 1 > > vga1 at pci1 dev 0 function 0 "VIA S3 Unichrome PRO IGP" rev 0x01 > > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > > pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA > > pciide0: using irq 11 for native-PCI interrupt > > wd0 at pciide0 channel 0 drive 0: <SAMSUNG HD160HJ> > > wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors > > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 > > pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, > > channel 0 configured to compatibility, channel 1 configured to compatibility > > pciide1: channel 0 disabled (no drives) > > pciide1: channel 1 disabled (no drives) > > uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 10 > > uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 10 > > uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 11 > > uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 11 > > ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 5 > > usb0 at ehci0: USB revision 2.0 > > uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1 > > viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00 > > iic0 at viapm0 > > spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-4200CL5 > > auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: irq 5 > > ac97: codec id 0x56494182 (VIA Technologies <82>) > > ac97: codec features 18 bit DAC, 18 bit ADC, No 3D Stereo > > audio0 at auvia0 > > vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x78: irq 10, address > > 00:40:63:ee:19:60 > > ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 10: OUI > > 0x004063, model 0x0032 > > puc0 at pci0 dev 20 function 0 "NetMos Nm9835" rev 0x01: ports: 2 com, 1 lpt > > com3 at puc0 port 0 irq 11: ns16550a, 16 byte fifo > > com4 at puc0 port 1 irq 11: ns16550a, 16 byte fifo > > lpt3 at puc0 port 2 irq 11 > > usb1 at uhci0: USB revision 1.0 > > uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1 > > usb2 at uhci1: USB revision 1.0 > > uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1 > > usb3 at uhci2: USB revision 1.0 > > uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1 > > usb4 at uhci3: USB revision 1.0 > > uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1 > > isa0 at mainbus0 > > isadma0 at isa0 > > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > > com0: console > > pckbc0 at isa0 port 0x60/5 > > pckbd0 at pckbc0 (kbd slot) > > pckbc0: using irq 1 for kbd slot > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > pcppi0 at isa0 port 0x61 > > midi0 at pcppi0: <PC speaker> > > spkr0 at pcppi0 > > lpt0 at isa0 port 0x378/4 irq 7 > > viasio0 at isa0 port 0x2e/2: VT1211 rev 0x02, HM, WDG not activated > > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > > biomask ff6d netmask ff6d ttymask ffff > > mtrr: Pentium Pro MTRR support > > axe0 at uhub0 port 4 configuration 1 interface 0 "Apple Computer Ethernet > > A1277" rev 2.00/0.01 addr 2 > > axe0: AX88772, address 00:1f:f3:8b:3b:3c > > ukphy1 at axe0 phy 16: Generic IEEE 802.3u media interface, rev. 1: OUI > > 0x000ec6, model 0x0006 > > umass0 at uhub0 port 8 configuration 1 interface 0 "Philips Philips > > Harddisk" rev 2.00/0.00 addr 3 > > umass0: using SCSI over Bulk-Only > > scsibus0 at umass0: 2 targets, initiator 0 > > sd0 at scsibus0 targ 1 lun 0: <Hitachi, HDT725050VLAT80, V56O> SCSI0 > > 0/direct fixed > > sd0: 476940MB, 512 bytes/sec, 976773168 sec total > > uscanner0 at uhub3 port 2 configuration 1 interface 0 "EPSON USB MFP" rev > > 1.10/1.00 addr 2 > > ulpt0 at uhub3 port 2 configuration 1 interface 1 "EPSON USB MFP" rev > > 1.10/1.00 addr 2 > > ulpt0: using bi-directional mode > > softraid0 at root > > root on wd0a swap on wd0b dump on wd0b > > > > > > > > -- > Antoine
