Hi misc
When using tip(1) with a serial console, I am unable to enter "ps" and
"trace" at the ddb> prompt. Any suggestions on how I can do that so
that I can use sendbug to send a PR.
Thanks,
Dave
Output from
# tip tty00 | tee logfile
<snip>
connected
>> OpenBSD/i386 BOOT 3.02
boot>
boot>
booting hd0a:/bsd:
/-\|/6596732-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|+1053256
[52+347648/-\|/-\|/-\|/-\|/-\|/+330182-\|/-\|/-\|/-\|/-\|/-]=0x7f1434
entry point at 0x200120
[ using 678256 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2009 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 4.6-current (GENERIC) #133: Tue Aug 25 21:52:51 MDT 2009
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1.60GHz ("GenuineIntel" 686-class) 1.60
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
real mem = 1341091840 (1278MB)
avail mem = 1290600448 (1230MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/22/05, BIOS32 rev. 0 @ 0xfd750, SMBIOS
rev. 2.33 @ 0xe0010 (57 entries)
bios0: vendor IBM version "1QET97WW (3.02 )" date 09/22/2005
bios0: IBM 2884A2U
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 95%
apm0: AC on, battery charge high, charging
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xfd6e0/0x920
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/272 (15 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #13 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1000 0xd1000/0x1000 0xdc000/0x4000!
0xe0000/0x10000
cpu0 at mainbus0: (uniprocessor)
cpu0: Enhanced SpeedStep 1599 MHz: speeds: 1600, 1400, 1200, 1000, 800, 600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
io address conflict 0x5800/0x8
io address conflict 0x5808/0x4
io address conflict 0x5810/0x8
io address conflict 0x580c/0x4
pchb0 at pci0 dev 0 function 0 "Intel 82855PM Host" rev 0x03
intelagp0 at pchb0
agp0 at intelagp: apert000
ppb0 at pci0 dev 1 function 0 "Intel 82855PM AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M6" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: irq 11
drm0 at radeondrm0
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pb1 at i0 dev30 funcon 0 "ntel 8201BAM Hb-to-PC" rev 081
pciat ppb bus 2
mem addess conflict 0xb0000000/0x1000
mem address conflict 0xb1000000/0x1000
cbb0 at pci2 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xaa: irq 11
cbb1 at pci2 dev 0 function 1 "Ricoh 5C476 CardBus" rev 0xaa: irq 11
"Ricoh 5C552 Firewire" rev 0x02 at pci2 dev 0 function 2 not configured
em0 at pci2 dev 1 function 0 "Intel PRO/1000MT (82540EP)" rev 0x03: irq 1,
addres 00:11:25:b4:27:d0
iwi0 at pci2 dev 2 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: irq 11,
addres 00:12:f0:91:a8:3f
ppci2 dev 3 function 0 "TI PCI2032 PCI-PCI" rev 0x00
pci3 at ppb2bus 9
io address conflict 0x9020/0x8
io address conflict 0x9014/0x4
io address conflict 0x9018/0x8
io address conflict 0x9010/0x4
io address conflict 0x9000/0x10
mem address conflict 0xb2000000/0x1000
mem address conflict 0xb3000000/0x1000
pciide0 at pci3 dev 1 function 0 "CMD Technology PCI0648" rev 0x01: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using irq 11 for native-PCI interrupt
pciide0:channel 0 disabled (no drives)
pciide0:channel 1 disabled (no drives)
cbb2 at pci3 dev 2 function 0 "TI PCI1420 CardBus" rev 0x00can't map registers
cbb3 at pci3 ev 2 function 1 "T PCI1420 CardBus" ev 0x00: irq 11
cardslot at cbb3 slot 0 flags 0
cardbus0 at cardslot0: bus 13 device 0 cacheline 0x8, lattimer 0x80
pcmcia0 at cardlot0
cardslot at cbb0 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x0, lattimer 0xb0
pcmcia1 at cardslot1
cardslot at cbb1 slot 2 flags 0
cardbus2 at cardslot2: bus 6 device 0 cacheline 0x0, lattimer 0xb0
pcmcia2 at cardslot2
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01: 24-bit timer
at 3579545Hz
pciide1 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide1 hannel0 driv 0: <TS54180G9A00>
wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide1: channe 1 disbled (o drivs)
iciic0 at pci0 dev31 function 3 "Itel 82801DB SMBu" rev 0x01: irq 1
iic0 at ichiic0
pdmem0 t iic0 ddr 0x5:56MB DR SDRAMnon-party PC270CL2.5
pdmem1 t iic0 ddr 0x5:GB DDRSDRAM nn-parit PC2700L2.5
uich0 a pci0 dv 31 fuction 5"Intel 2801DB C97" re 0x01: rq 11, CH4 AC9
c97: coec id 0144537 (Analo Device AD1981)
ac97 codec eaturesheadphoe, 20 bt DAC, o 3D Streo
udio0 a auich0
"Intel82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured
usb1 at uhci0: SB revsion 10
uhub1 at usb1 "ntel UCI roo hub" ev 1.0/1.00 ddr 1
usb2 at 1: UB revison 1.0
ub2 atusb2 "Iel UHC root h" rev .00/1.0 addr 1
usb3 at uhci2: SB revsion 10
uhub3 at usb3 "ntel UCI roo hub" ev 1.0/1.00 ddr 1
sa0 at hpcib0
panic:isaattach: can't map DMA controller #1
Stopped at Debugger+0x4: leave
Debugger(d1f2cd00,d1f2cd00,d09f3d68,d09f3db0,d1f2cd00) at Debugger+0x4
panic(d07e0e00,d1f2cd00,d09f3db0,0,d0824400) at panic+0x55
isaattach(d1f20980,d1f2cd00,d09f3db0,d1f20980,800) at isaattach+0xee
config_attach(d1f20980,d082218c,d09f3db0,d05eb04c,d0753ae5) at config_attach+0x
fd
pcib_callback(d1f20980,2,1f,7,d1ef6e80) at pcib_callback+0x48
config_process_deferred_children(d1ef6e80,0,0,d1ef5fc0,d1ef4ea0) at config_proc
ess_deferred_children+0x59
config_attach(d1ef5fc0,d08206f8,d09f3e70,d04d807c) at config_attach+0x105
mainbus_attach(0,d1ef5fc0,0,dc498000,d09f2334) at mainbus_attach+0x1f1
config_attach(0,d08206d4,0,0,0) at config_attach+0xfd
config_rootfound(d0741d82,0,d09f3f38,d04a73d2) at config_rootfound+0x27
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb>
ddb>
ddb>
ddb>
ddb> OpenBSD/i386RHHC THAT INFORMATION!
No such command
ddb>
ddb>
ddb>
ddb> ddb>
No such command
ddb>
ddb>
ddb>
ddb> ddb>de3 THAT dbddb>
No such command
ddb>
ddb>
ddb>
ddb> ddb>
No such command
ddb>
ddb>
ddb>
ddb> ddb>nd
No such command
ddb>
ddb>
ddb>
ddb> ddb >ocommandd
No such command
ddb> d
Not set.
ddb> No such commanddnd
No such command
ddb>
Not set.
ddb>
Not set.
ddb>
Not set.
ddb> No such comma
No such command
ddb> bo
sync crash dump halt reboot poweroff
ddb> ddb> d
No such command
ddb>
Not set.
ddb>
Not set.
ddb>
Not set.
ddb> Notomm
No such command
ddb>
Not set.
ddb>
Not set.
ddb>
Not set.
ddb> Notoo
No such command
ddb> rash pd comma
No such command
ddb>
Not set.
ddb>
Not set.
ddb>
Not set.
ddb> ddb>
No such command
ddb>
Not set.
ddb>
Not set.
ddb>
Not set.
ddb> Not t
No such command
ddb> nt set.
No such command
ddb> t
Debugger(d1f2cd00,d1f2cd00,d09f3d68,d09f3db0,d1f2cd00) at Debugger+0x4
panic(d07e0e00,d1f2cd00,d09f3db0,0,d0824400) at panic+0x55
isaattach(d1f20980,d1f2cd00,d09f3db0,d1f20980,800) at isaattach+0xee
config_attach(d1f20980,d082218c,d09f3db0,d05eb04c,d0753ae5) at config_attach+0x
fd
pcib_callback(d1f20980,2,1f,7,d1ef6e80) at pcib_callback+0x48
config_process_deferred_children(d1ef6e80,0,0,d1ef5fc0,d1ef4ea0) at config_proc
ess_deferred_children+0x59
config_attach(d1ef5fc0,d08206f8,d09f3e70,d04d807c) at config_attach+0x105
mainbus_attach(0,d1ef5fc0,0,dc498000,d09f2334) at mainbus_attach+0x1f1
config_attach(0,d08206d4,0,0,0) at config_attach+0xfd
config_rootfound(d0741d82,0,d09f3f38,d04a73d2) at config_rootfound+0x27
cpu_configure(d0948f20,1,3,0,2) at cpu_configure+0x29
main(0,0,0,0,0) at main+0x394
ddb> d
Not set.
ddb>
Not set.
ddb>
Not set.
ddb>
Not set.
ddb> d
Not set.
ddb> No sucht bu
No such command
ddb> ,a0xtfound(d0741) at config_rootfound+0x27
?
ddb>
Not set.
ddb>
Not set.
ddb>
Not set.
ddb> cpu_configure,c
No such command
ddb> at main+0x394
No such command
ddb>
Not set.
ddb>
Not set.
ddb> ddb>
No such command
ddb>
Not set.
ddb>
Not set.
ddb>
Not set.
ddb> Not s.
No such command
ddb>
Not set.
ddb> Not uafonfig_rob
No such command
ddb>
Not set.
ddb> ddb>
No such command
ddb>
Not set.
ddb>
Not set.
ddb>
Not set.
ddb> Not se
No such command
ddb> igure,
No such command
ddb> 9mNot set
Bad character in number
ddb>
Not set.
ddb>
Not set.
ddb> ddb>nd
No such command
ddb>
Not set.
ddb>
Not set.
ddb>
Not set.
ddb> ddb>eoot s.
No such command
ddb> d
Not set.
ddb> fh command
No such command
ddb>
Not set.
ddb>
Not set.
ddb>
Not set.
ddb> b>h command
Ambiguous
ddb>
Not set.
ddb> d
Not set.
ddb> sse
No such command
ddb>
Not set.
ddb>
Not set.
ddb>
Not set.
ddb> No suc h 9mNoi d
No such command
ddb>
Not set.
ddb>
Not set.
ddb>
Not set.
ddb> ddb> ddb>nd
No such command
ddb>
Not set.
ddb> b
Ambiguous
ddb> tt set.
No such command
ddb>
Not set.
ddb>
Not set.
ddb>
Not set.
ddb> ddub>
No such command
ddb> ddb> fhmN
No such command
ddb> db>
No such command
ddb>
Not set.
ddb> command
No such command
ddb>
Not set.
ddb>
Not set.
ddb> Not st
No such command
ddb> No sucht
No such command
ddb> >
Bad character
?
ddb>
Not set.
ddb>
Not set.
ddb>
Not set.
ddb> Nh 9mNoi dddb
No such command
ddb> b
Ambiguous
ddb> d
Not set.
ddb>
Not set.
ddb>
Not set.
ddb>
Not set.
ddb> No such csembt
No such command
ddb> db>
No such command
ddb>
Not set.
ddb>
Not set.
ddb>
Not set.
ddb> Not set.
No such command
ddb>
Not set.
ddb> ddbafo>
No such command
ddb>
Not set.
ddb>
Not set.
ddb>
Not set.
ddb> No
No such command
ddb> > commandd
Bad character
?
ddb> sst
No such command
ddb>
Not set.
ddb> b> No suchtdb> ? set.
Ambiguous
ddb>
Not set.
ddb>
Not set.
ddb>
Not set.
ddb> ddb>
No such command
ddb>
Not set.
ddb>
Not set.
ddb>
Not set.
ddb> Not NNN
No such command
ddb>
Not set.
ddb> ddb>
No such command
ddb> . set.
?
ddb>
Not set.
ddb>
Not set.
ddb> dt
No such command
ddb>
Not set.
ddb>
Not set.
ddb>
Not set.
ddb> db>
No such
ddb>
Not set.
ddb>
Not
<snip>
dmesg from remote host
OpenBSD 4.6-current (GENERIC.MP) #151: Tue Aug 25 22:00:23 MDT 2009
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM) Duo CPU L2500 @ 1.83GHz ("GenuineIntel" 686-class) 1.83
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR
real mem = 2137419776 (2038MB)
avail mem = 2062155776 (1966MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/20/08, BIOS32 rev. 0 @ 0xfd690, SMBIOS
rev. 2.4 @ 0xe0010 (67 entries)
bios0: vendor LENOVO version "7BETD7WW (2.18 )" date 11/20/2008
bios0: LENOVO 1702H7U
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET BOOT SSDT SSDT SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) DURT(S3) EXP0(S4) EXP1(S4) EXP2(S4)
EXP3(S4) PCI1(S4) USB0(S3) USB1(S3) USB2(S3) USB7(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) Duo CPU L2500 @ 1.83GHz ("GenuineIntel" 686-class) 1.83
GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus 4 (EXP2)
acpiprt5 at acpi0: bus 12 (EXP3)
acpiprt6 at acpi0: bus 21 (PCI1)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpipwrres0 at acpi0: PUBS
acpitz0 at acpi0: critical temperature 127 degC
acpitz1 at acpi0: critical temperature 97 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "42T4571" serial 6761 type LION oem "SONY"
acpibat1 at acpi0: BAT1 not present
acpibat2 at acpi0: BAT2 not present
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
acpidock0 at acpi0: GDCK docked (15)
bios0: ROM list: 0xc0000/0xea00! 0xcf000/0x1000 0xd0000/0x1000 0xdc000/0x4000!
0xe0000/0x10000!
cpu0: Enhanced SpeedStep 1829 MHz: speeds: 1833, 1333, 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16 (irq 11)
drm0 at inteldrm0
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 1 int
17 (irq 11)
azalia0: RIRB time out
azalia0: codecs: Analog Devices AD1981HD, 0x0000/0x0000, using Analog Devices
AD1981HD
azalia0: RIRB time out
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 1 int 20
(irq 11)
pci1 at ppb0 bus 2
em0 at pci1 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00: apic 1 int
16 (irq 11), address 00:16:d3:32:eb:43
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 1 int 21
(irq 11)
pci2 at ppb1 bus 3
wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: apic 1 int
17 (irq 11), MoW1, address 00:19:d2:28:0b:06
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 1 int 22
(irq 11)
pci3 at ppb2 bus 4
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 1 int 23
(irq 11)
pci4 at ppb3 bus 12
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 16
(irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 17
(irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18
(irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 19
(irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 19
(irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 21
cbb0 at pci5 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xb4: apic 1 int 16
(irq 11)
"Ricoh 5C552 Firewire" rev 0x09 at pci5 dev 0 function 1 not configured
sdhc0 at pci5 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x18: apic 1 int 18
(irq 11)
sdmmc0 at sdhc0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 22 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4083N, 1.08> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: apic 1 int 16
(irq 11), AHCI 1.1
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, MR25.2-S128G, B8K2> SCSI3 0/direct fixed
sd0: 122879MB, 512 bytes/sec, 251658239 sec total
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1 int 23
(irq 11)
iic0 at ichiic0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhub5 at uhub0 port 6 "vendor 0x17ef product 0x1000" rev 2.00/0.01 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
