# dmesg
OpenBSD 4.5-stable (LESCHACO) #0: Mon Aug 10 15:49:13 WIT 2009
r...@localhost:/usr/src/sys/arch/i386/compile/LESCHACO
cpu0: VIA Nehemiah ("CentaurHauls" 686-class) 1 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,SEP,MTRR,PGE,CMOV,PAT,MMX,FXSR,SSE
real mem = 502824960 (479MB)
avail mem = 477851648 (455MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/19/04, BIOS32 rev. 0 @
0xfb210, SMBIOS rev. 2.2 @ 0xf0800 (26 entries)
bios0: vendor Award Software International, Inc. version "6.00 PG"
date 05/19/2004
bios0: VIA Technologies, Inc. VT8623-8235
apm0 at bios0: Power Management spec V1.2 (slowidle)
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf44
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfded0/112 (5 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11 12
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8235 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xec00 0xd0000/0x8000!
cpu0 at mainbus0: (uniprocessor)
cpu0: RNG AES
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8623 PCI" rev 0x00
viaagp0 at pchb0: v2
agp0 at viaagp0: aperture at 0xe6000000, size 0xe800000
ppb0 at pci0 dev 1 function 0 "VIA VT8633 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA CLE266" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"VIA VT6306 FireWire" rev 0x80 at pci0 dev 13 function 0 not configured
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 11
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 12
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 10
ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB" rev 0x82: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00
iic0 at viapm0
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2100CL2.5
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
channel 0 configured to compatibility, channel 1 configured to
compatibility
pciide0: channel 0 disabled (no drives)
wd0 at pciide0 channel 1 drive 0: <ST320413A>
wd0: 16-sector PIO, LBA, 19092MB, 39102336 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x50: irq 10
ac97: codec id 0x49434552 (ICEnsemble VIA VT1616i)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D
audio0 at auvia0
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x74: irq 11,
address 00:40:63:dd:74:6a
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 8: OUI
0x004063, model 0x0032
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
viasio0 at isa0 port 0x2e/2: VT1211 rev 0x02, HM, WDG not activated
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ff65 netmask ff65 ttymask ffff
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
wd0a: aborted command, interface CRC error reading fsbn 24063776 of
24063776-24063807 (wd0 bn 24063839; cn 1591 tn 125 sn 44), retrying
wd0: transfer error, downgrading to Ultra-DMA mode 4
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
wd0a: aborted command, interface CRC error reading fsbn 24063776 of
24063776-24063807 (wd0 bn 24063839; cn 1591 tn 125 sn 44), retrying
wd0: transfer error, downgrading to Ultra-DMA mode 3
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 3
wd0a: aborted command, interface CRC error reading fsbn 24063776 of
24063776-24063807 (wd0 bn 24063839; cn 1591 tn 125 sn 44), retrying
wd0: soft error (corrected)
#
any clue to make this problem dma mising, i think problem of hard disk but not
sonjaya
http://idsale.blogspot.com
