Well, I built and installed the JDK (1.7) from ports. The FAQ is correct about
it's taking a long time, and it took so much space that I ended up mounting an
additional partition for /usr/ports, because /usr ran out of space the first
time.
But the predicted (by the FAQ) message on using the plugin that comes along
with JDK installation did not appear. What have I missed? Relevant messages
below.
--
Ed Ahlsen-Girard
Ft. Walton Beach FL
# make install;date
===> Faking installation for jdk-1.7.0.00
install -d -o root -g bin -m 755
/usr/ports/obj/jdk-1.7.0.00/fake-i386/usr/local/jdk-1.7.0
cd /usr/ports/obj/jdk-1.7.0.00/openjdk/build/bsd-i586/j2sdk-image && tar -cf -
* | tar -C /usr/ports/obj/jdk-1.7.0.00/fake-i386/usr/local/jdk-1.7.0 -xf -
install -d -o root -g bin -m 755
/usr/ports/obj/jdk-1.7.0.00/fake-i386/usr/local/jre-1.7.0
cd /usr/ports/obj/jdk-1.7.0.00/openjdk/build/bsd-i586/j2re-image && tar -cf - *
| tar -C /usr/ports/obj/jdk-1.7.0.00/fake-i386/usr/local/jre-1.7.0 -xf -
===> Building package for jdk-1.7.0.00b59p1
Create /usr/ports/packages/i386/all/jdk-1.7.0.00b59p1.tgz
# dmesg
OpenBSD 4.6-current (GENERIC) #171: Tue Sep 8 20:49:10 MDT 2009
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class, 512KB L2 cache) 449 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 268009472 (255MB)
avail mem = 251281408 (239MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/01/01, BIOS32 rev. 0 @ 0xffe90, SMBIOS
rev. 2.2 @ 0xfb410 (64 entries)
bios0: vendor Dell Computer Corporation version "A10" date 08/01/01
bios0: Dell Computer Corporation OptiPlex GX1 450M+
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
acpi: bad checksum at 0xd7207f50
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc670/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371AB PIIX4 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xd000 0xd0000/0x8000
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xf0000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
"ATI Rage Pro" rev 0x5c at pci1 dev 0 function 0 not configured
piixpcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD64AA>
wd0: 16-sector PIO, LBA, 6149MB, 12594960 sectors
wd1 at pciide0 channel 0 drive 1: <WDC WD800JB-00JJC0>
wd1: 16-sector PIO, LBA, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LG, CD-ROM CRD-8400B, 1.06> ATAPI 5/cdrom
removable
wd2 at pciide0 channel 1 drive 1: <WDC WD600BB-75CAA0>
wd2: 16-sector PIO, LBA, 57220MB, 117187500 sectors
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
wd2(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x02: SMBus disabled
vga1 at pci0 dev 13 function 0 "ATI Radeon 9200 SE Sec" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: irq 11
drm0 at radeondrm0
ohci0 at pci0 dev 14 function 0 "Acer Labs M5237 USB" rev 0x03: irq 11, version
1.0, legacy support
ehci0 at pci0 dev 14 function 3 "Acer Labs M5239 USB2" rev 0x01: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Acer Labs EHCI root hub" rev 2.00/1.00 addr 1
xl0 at pci0 dev 17 function 0 "3Com 3c905B 100Base-TX" rev 0x24: irq 11,
address 00:c0:4f:14:cd:00
exphy0 at xl0 phy 24: 3Com internal media interface
isa0 at piixpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
isapnp0 at isa0 port 0x279: read port 0x203
wss1 at isapnp0 "CS4236B, CSC0000, , WSS/SB" port 0x534/4,0x388/4,0x220/16 irq
5 drq 1,0: CS4236/CS4236B (vers 0)
audio0 at wss1
joy0 at isapnp0 "CS4236B, CSC000F, , Game" port 0x3a0/8
"CS4236B, CSC0010, , Ctrl" at isapnp0 port 0xf00/8 not configured
"CS4236B, CSC0003, , MPU" at isapnp0 port 0x330/2 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
biomask ef45 netmask ef45 ttymask ffdf
mtrr: Pentium Pro MTRR support
ugen0 at uhub2 port 2 "OMNIKEY AG Smart Card Reader USB" rev 1.10/2.00 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
root on wd1a swap on wd1b dump on wd1b
