Sorry, I know I shouldn't send attachments.
OpenBSD 4.6-current (RAMDISK_CD) #147: Sat Sep 12 22:03:55 MDT 2009
[email protected]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem = 3479375872 (3318MB)
avail mem = 3385384960 (3228MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/14/09, BIOS32 rev. 0 @ 0xfa1f0,
SMBIOS rev. 2.6 @ 0xcf79c000 (77 entries)
bios0: vendor Dell Inc. version "1.0.5" date 04/14/2009
bios0: Dell Inc. PowerEdge R410
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC SPCR HPET DM__ MCFG WD__ SLIC ERST HEST BERT
EINJ SRAT TCPA SSDT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 16 (boot processor)
cpu0: apic clock running at 133MHz
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 1 pa 0xfec80000, version 20, 24 pins
ioapic1: misconfigured as apic 0, remapped to apid 1
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEX1)
acpiprt2 at acpi0: bus 2 (PEX3)
acpiprt3 at acpi0: bus 3 (PEX7)
acpiprt4 at acpi0: bus -1 (PEX9)
acpiprt5 at acpi0: bus -1 (PEXA)
acpiprt6 at acpi0: bus -1 (SBEX)
acpiprt7 at acpi0: bus 4 (COMP)
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x5c00 0xce000/0x1000 0xcf000/0x1e00
0xd1000/0x1000! 0xec000/0x4000!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 5500 Host" rev 0x13
ppb0 at pci0 dev 1 function 0 "Intel X58 PCIE" rev 0x13
pci1 at ppb0 bus 1
bnx0 at pci1 dev 0 function 0 "Broadcom BCM5716" rev 0x20: apic 1 int 4 (irq
15)
bnx1 at pci1 dev 0 function 1 "Broadcom BCM5716" rev 0x20: apic 1 int 16
(irq 14)
ppb1 at pci0 dev 3 function 0 "Intel X58 PCIE" rev 0x13
pci2 at ppb1 bus 2
mpi0 at pci2 dev 0 function 0 "Symbios Logic SAS1068E" rev 0x08: apic 1 int
0 (irq 15)
scsibus0 at mpi0: 112 targets
sd0 at scsibus0 targ 0 lun 0: <Dell, VIRTUAL DISK, 1028> SCSI3 0/direct
fixed
sd0: 152064MB, 512 bytes/sec, 311427072 sec total
scsibus0 targ 8 lun 0: <DP, BACKPLANE, 1.07> SCSI3 13/enclosure services
fixed not configured
ppb2 at pci0 dev 7 function 0 "Intel X58 PCIE" rev 0x13: apic 1 int 21 (irq
0)
pci3 at ppb2 bus 3
"Intel X58 Misc" rev 0x13 at pci0 dev 20 function 0 not configured
"Intel X58 GPIO" rev 0x13 at pci0 dev 20 function 1 not configured
"Intel X58 RAS" rev 0x13 at pci0 dev 20 function 2 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801JI USB" rev 0x00: apic 0 int 17
(irq 14)
uhci1 at pci0 dev 26 function 1 "Intel 82801JI USB" rev 0x00: apic 0 int 18
(irq 11)
ehci0 at pci0 dev 26 function 7 "Intel 82801JI USB" rev 0x00: apic 0 int 19
(irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
uhci2 at pci0 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 0 int 21
(irq 6)
uhci3 at pci0 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 0 int 20
(irq 5)
uhci4 at pci0 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 0 int 21
(irq 6)
uhci5 at pci0 dev 29 function 3 "Intel 82801JI USB" rev 0x00: apic 0 int 20
(irq 5)
ehci1 at pci0 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 0 int 21
(irq 6)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90
pci4 at ppb3 bus 4
vga1 at pci4 dev 3 function 0 "Matrox MGA G200eW" rev 0x0a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel 82801JIR LPC" rev 0x00
pciide0 at pci0 dev 31 function 2 "Intel 82801JI SATA" rev 0x00: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 0 int 23 (irq 14) for native-PCI interrupt
pciide1 at pci0 dev 31 function 5 "Intel 82801JI SATA" rev 0x00: DMA,
channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 0 int 22 (irq 11) for native-PCI interrupt
atapiscsi0 at pciide1 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TEAC, DVD-ROM DV28SV, D.0K> ATAPI 5/cdrom
removable
cd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
rd0: fixed, 3800 blocks
uhub8 at uhub0 port 3 "vendor 0x0424 product 0x2514" rev 2.00/0.00 addr 2
uhub9 at uhub2 port 1 "Dell Dell USB Keyboard Hub" rev 1.10/48.00 addr 2
umass0 at uhub4 port 1 configuration 1 interface 0 "TEAC TEAC FD-05PUB" rev
2.00/0.00 addr 2
umass0: using UFI over CBI with CCI
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <TEAC, FD-05PUB, 3000> ATAPI 0/direct
removable
sd1: 1MB, 512 bytes/sec, 2880 sec total
uhidev0 at uhub9 port 1 configuration 1 interface 0 "Dell Dell USB Keyboard
Hub" rev 1.10/48.00 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub9 port 1 configuration 1 interface 1 "Dell Dell USB Keyboard
Hub" rev 1.10/48.00 addr 3
uhidev1: iclass 3/0, 3 report ids
uhid at uhidev1 reportid 1 not configured
uhid at uhidev1 reportid 2 not configured
uhid at uhidev1 reportid 3 not configured
softraid0 at root
root on rd0a swap on rd0b dump on rd0b
bnx0: address 00:24:e8:6c:2d:99
brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
bnx1: address 00:24:e8:6c:2d:9a
brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
sd1(umass0:1:0): Check Condition (error 0x70) on opcode 0x2a
SENSE KEY: Not Ready
ASC/ASCQ: ASC 0x3a ASCQ 0x00
On Sun, Sep 13, 2009 at 6:42 PM, David Gwynne <[email protected]> wrote:
> which dells specifically? are you able to get a dmesg off it?
>
> dlg
>
>
> On 14/09/2009, at 6:47 AM, John Brahy wrote:
>
> Hi,
>>
>> I bought a couple new dells with Broadcom BCM5716 chips on the motherboard
>> for network support but everytime I boot and it gets to the starting
>> network
>> it reboots on me.
>>
>> Anyone have any ideas on this?
>>
>> thanks,
>>
>> JB
>>
>>
>
** *John Brahy *| CTO | P 310.356.7500 | F 310.356.7520
[email protected] | 1990 East Grand Ave, Suite 200, El Segundo, CA
90245
