On Sun, Sep 20, 2009 at 10:11:12PM -0600, Michael Burk wrote: > Hi All, > > After years of using OpenBSD on servers, I want to take the plunge and > setup an OpenBSD-based laptop. From what I gather on this list, it > looks like ThinkPads are better supported than most. I've been looking > at two models - the ThinkPad T400 and T400s. I've tried to determine > if all the components are supported, but I'm not sure about some > things. If anyone has direct experience with these models (they've > been out for a year or so, I think), I'd appreciate any feedback. > > Here's what I've determined about support: > > CPU: Intel Core2 Duo (SP9600 or T9600) - yes; use AMD64 arch? > ATI Mobility Radeon 3470 - yes > - or - > Intel GMA 4500MHD - ? > UltraNav (TrackPoint and TouchPad) - probably > DisplayPort video port for external monitor - ? > (I'd like to be able to have two separate screens configured, > though video mirroring would be OK) > Intel WiFi Link 5300 - yes
I have a T400 w/ an ATHEROS 5425 card that is yet to be supported. Although, there are versions of that chip that have support. > Sound card (no specs available) - ? > Bluetooth - yes through ports > 5 in 1 or 7 in 1 Media Card Reader - standard USB storage device? > Integrated camera - no > Fingerprint reader - no > > One serious drawback is that I can't find a place locally that sells > them, so I can't find out how they feel, sound, or how good the screen > looks. I'd appreciate any comments about these aspects also. I really like the look and feel (I can send screenshots, if you desire). When I was researching what to buy, many reviews claimed that the keyboard too "flimsy." While I can bend the plastic in a couple of places, I find that keyboard is quite sturdy. The sound is fine. As good as I expect from small laptop speakers. I use them everyday to listen to music while I work and sometimes turn the sound up to listen to stuff as I do things like fold laundry or cook dinner. Also, the keyboard sound control buttons work (and have since I installed oBSD on it over a year ago). I would recommend this machine. g'luck! -Neal dmesg: OpenBSD 4.6-current (GENERIC.MP) #178: Tue Sep 8 20:47:48 MDT 2009 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 2070614016 (1974MB) avail mem = 2011025408 (1917MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (74 entries) bios0: vendor LENOVO version "7UET43WW (1.13 )" date 08/19/2008 bios0: LENOVO 7417CTO acpi0 at bios0: rev 2 acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT TCPA SSDT SSDT SSDT acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) IGBE(S4) EXP0(S4) EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3) EHC0(S3) EHC1(S3) HDEF(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, 2394.30 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR,NXE,LONG cpu0: 3MB 64b/line 8-way L2 cache cpu0: apic clock running at 266MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, 2394.00 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR,NXE,LONG cpu1: 3MB 64b/line 8-way L2 cache ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 2, remapped to apid 1 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (AGP_) acpiprt2 at acpi0: bus 2 (EXP0) acpiprt3 at acpi0: bus 3 (EXP1) acpiprt4 at acpi0: bus -1 (EXP2) acpiprt5 at acpi0: bus 5 (EXP3) acpiprt6 at acpi0: bus 13 (EXP4) acpiprt7 at acpi0: bus 21 (PCI1) acpiec0 at acpi0 acpicpu0 at acpi0: C3, C2, C1, PSS acpicpu1 at acpi0: C3, C2, C1, PSS acpipwrres0 at acpi0: PUBS acpitz0 at acpi0: critical temperature 127 degC acpitz1 at acpi0: critical temperature 100 degC acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: SLPB acpibat0 at acpi0: BAT0 model "42T5225" serial 3388 type LION oem "Panasonic" acpibat1 at acpi0: BAT1 not present acpiac0 at acpi0: AC unit online acpithinkpad0 at acpi0 acpidock0 at acpi0: GDCK not docked (0) cpu0: Enhanced SpeedStep 2394 MHz: speeds: 2401, 2400, 1600, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07 vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp0 at vga1 agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 inteldrm0 at vga1: apic 1 int 16 (irq 11) drm0 at inteldrm0 "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: apic 1 int 20 (irq 11), address 00:1e:37:d9:cc:ed uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20 (irq 11) uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 21 (irq 11) uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 22 (irq 11) ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 23 (irq 11) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: apic 1 int 17 (irq 11) azalia0: codecs: Conexant CX20561 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int 20 (irq 11) pci1 at ppb0 bus 2 ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int 21 (irq 11) pci2 at ppb1 bus 3 ath0 at pci2 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 1 int 17 (irq 11) ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR02W, address 00:22:69:86:96:77 ppb2 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: apic 1 int 23 (irq 11) pci3 at ppb2 bus 5 ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 1 int 20 (irq 11) pci4 at ppb3 bus 13 uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16 (irq 11) uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17 (irq 11) uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18 (irq 11) ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19 (irq 11) usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93 pci5 at ppb4 bus 21 cbb0 at pci5 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 int 16 (irq 11) "Ricoh 5C832 Firewire" rev 0x04 at pci5 dev 0 function 1 not configured cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 22 device 0 cacheline 0x0, lattimer 0xb0 pcmcia0 at cardslot0 pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03 ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: apic 1 int 16 (irq 11), AHCI 1.2 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: <ATA, HITACHI HTS72201, DCDZ> SCSI3 0/direct fixed sd0: 152627MB, 512 bytes/sec, 312581808 sec total cd0 at scsibus0 targ 1 lun 0: <HL-DT-ST, DVDRAM GSA-U20N, HX12> ATAPI 5/cdrom removable ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 1 int 23 (irq 11) iic0 at ichiic0 usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb7 at uhci5: USB revision 1.0 uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 aps0 at isa0 port 0x1600/31 mtrr: Pentium Pro MTRR support vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root root on sd0a swap on sd0b dump on sd0 > > Thanks, > Michael