Hi,
i have a IBM Thinkpad T41 running OpenBSD 4.6 stable. The Thinkpad has 2
USB Ports and supports USB 2.0 (ehci). If i plug in a umass device,
sometimes i get USB 2 speed, sometimes not. In my dmesg I can see that
uhub0 is on usb0 thats on ehci, but uhub1 - uhub3 are uhci devices. My
USB harddrive sometimes plugs in on uhub0, but sometimes not. Is there a
way to always attach a USB 2 device to an ehci port? Or maybe can I
configure the kernel to bound umass devices only to uhub0?
dmesg:
OpenBSD 4.6 (GENERIC) #3: Thu Oct 29 11:12:11 CET 2009
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1700MHz ("GenuineIntel" 686-class) 1.70
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,EST,TM2
real mem = 1072656384 (1022MB)
avail mem = 1028411392 (980MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/18/04, BIOS32 rev. 0 @ 0xfd750, SMBIOS
rev. 2.33 @ 0xe0010 (61 entries)
bios0: vendor IBM version "1RETCDWW (3.06f)" date 06/18/2004
bios0: IBM 2373TG5
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 95%
apm0: AC on, battery charge high, charging
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xfd6e0/0x920
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/272 (15 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #6 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1000 0xd1000/0x1000 0xdc000/0x4000!
0xe0000/0x10000
cpu0 at mainbus0: (uniprocessor)
cpu0: Enhanced SpeedStep 1695 MHz: speeds: 1700, 1400, 1200, 1000, 800, 600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
io address conflict 0x5800/0x8
io address conflict 0x5808/0x4
io address conflict 0x5810/0x8
io address conflict 0x580c/0x4
pchb0 at pci0 dev 0 function 0 "Intel 82855PM Host" rev 0x03
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xd0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0 "Intel 82855PM AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M9" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: irq 11
drm0 at radeondrm0
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81
pci2 at ppb1 bus 2
mem address conflict 0xb0000000/0x1000
mem address conflict 0xb1000000/0x1000
cbb0 at pci2 dev 0 function 0 "TI PCI4520 CardBus" rev 0x01: irq 11
cbb1 at pci2 dev 0 function 1 "TI PCI4520 CardBus" rev 0x01: irq 11
em0 at pci2 dev 1 function 0 "Intel PRO/1000MT (82540EP)" rev 0x03: irq 11,
address 00:0d:60:7b:15:dd
ath0 at pci2 dev 2 function 0 "Atheros AR5212 (IBM MiniPCI)" rev 0x01: irq 11
ath0: AR5213 5.6 phy 4.1 rf5111 1.7 rf2111 2.3, WOR1W, address 00:05:4e:4c:0e:93
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 6 device 0 cacheline 0x8, lattimer 0xb0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01: 24-bit timer
at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG HM160HC>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA755yDVD/CDRW, 1.72> ATAPI 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: irq 11
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2700CL2.5
spdmem1 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC2700CL2.5
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 11, ICH4
AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask effd netmask effd ttymask ffff
mtrr: Pentium Pro MTRR support
ubt0 at uhub3 port 1 "Actiontec Electronics product 0x0441" rev 1.10/5.46 addr 2
uhidev0 at uhub2 port 1 configuration 1 interface 0 "Logitech USB-PS/2 Optical
Mouse" rev 2.00/24.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 8 buttons, Z dir
wsmouse1 at ums0 mux 0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
umass0 at uhub0 port 4 configuration 1 interface 0 "Genesys Logic USB TO IDE"
rev 2.00/0.33 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <ExcelSto, r Technology J88, 0811> SCSI0 0/direct
fixed
sd0: 78533MB, 512 bytes/sec, 160836480 sec total
sd0 detached
scsibus1 detached
umass0 detached
umass0 at uhub2 port 2 configuration 1 interface 0 "Genesys Logic USB TO IDE"
rev 2.00/0.33 addr 3
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <ExcelSto, r Technology J88, 0811> SCSI0 0/direct
fixed
sd0: 78533MB, 512 bytes/sec, 160836480 sec total
sd0 detached
scsibus1 detached
umass0 detached
umass0 at uhub0 port 4 configuration 1 interface 0 "Genesys Logic USB TO IDE"
rev 2.00/0.33 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <ExcelSto, r Technology J88, 0811> SCSI0 0/direct
fixed
sd0: 78533MB, 512 bytes/sec, 160836480 sec total
sd0 detached
scsibus1 detached
umass0 detached
--
Reni Maroufi
[email protected]
